HiModel
ACE NI-MH 1600MAH/6.0V HP 2/3A BATTERY PACK W/JR CONNECTORS COMPETITION CLASS (FLAT)
| Type | Ni-Mh Flat |
| Capacity | 1600mah |
| Voltage | 6.0V |
| Weight | 116g / 4.1 oz |
, , , , , , Specifications:, , , , , , , , , , , Connector type: JR, Competition class, , ,
Features: ACE Ni-Mh 1600mAh/6.0V HP 2/3A Battery Pack W/JR Connectors ...HiModel
30CM HIGH QUALITY SERVOS EXTENSION W/ JR CONNECTORS
| Length | 30cm |
, , , , , , Specifications:, , , , , , , , , , , HiModel high quality JR standard servos extension lead:, , ,
Features: Very soft and flexible. Includes/Requires: Includes: 1 x 30cm ...HiModel
JR STYLE TX BATTERY CONNECTOR W/METAL PINS (10 PIECES)
, , , , , , Specifications:, , , , , , , , , , , JR Style transmitter Battery pack connector, , ,
Features: This is the connector used for JR transmitter battery ...HiModel
HIMODEL ON-BOARD LED 3-30V BATTERY VOLTAGE CHECKER W/JR CONNECTOR
| Dimension | 24x20x 12 mm |
| Weight | 6 grams |
| Operating Voltage | 3V to 30V per cell |
| Connector type | JR, compatible with Futaba |
| Current consumption | 4-8mA |
| Wire length | 20cm |
, , , , , , Specifications:, , , , , , , , , , , * This voltage checker only have two wires for input, and it using a JR connector for input, you can not connect it directly to a balance connector of a battery pack., For the type which can plug directly to the balance connector of a battery pack, refer to, MINIBC6S, instead., * Wrong polarity will damage the device, and not covered by warranty., , ,
Features: This voltage checker is designed for on-board use, it ...HiModel
60-CORE JR STYLE SERVO WIRE 2 METERS
| Length | 2 Meters |
, , , , , , Specifications:, , , , , , , , , , , 60-core JR Style Servo Wires, , ,
HiModel
FUTABA/JR COMPATIBLE FEMALE-FEMALE CONNECTION LEAD 30CM
| Length | 30 CM (approx.) |
| Connector | Futaba/JR compatible female (both ends) |
, , , , , , Specifications:, , , , , , , , , , , Futaba/JR Compatible Female-Female Connection Lead 30CM, * Gender of connectors is determined by the terminal, not the housing., , ,
Features: Typical application: connect multi-rotor flight control and receiver. Includes/Requires: ...HiModel
30CM JR MALE TO MALE 3-WIRE EXTENSION
| Length | 30cm |
, , , , , , Specifications:, , , , , , , , , , , 30cm JR Male to Male 3-wire Extension, Male connectors on both ends., , ,
Includes/Requires: Includes:1 x ExtensionHiModel
2-PIN MALE BATTERY CONNECTOR FOR JR STYLE TRANSMITTER (10PCS)
| Typical application | connector used on JR transmitter for TX battery. |
, , , , , , Specifications:, , , , , , , , , , , 2-pin Male Battery Connector for JR Style Transmitter (10pcs), * Gender of connectors is determined by the metal terminal, not the housing., , ,
Includes/Requires: Include: 10 x male connectorsHiModel
SIMULATOR ADAPTOR CABLE FOR JR TRANSMITTER
, , , , , , Specifications:, , , , , , , , , , , Simulator adapting cable for JR transmitters., *This is the conversion cable only, the simulator dongle etc. to be purchased separately., , ,
Includes/Requires: Includes:1 x cableHiModel
ACE NI-MH 1600MAH/6.0V HP 2/3A BATTERY PACK W/JR CONNECTOR COMPETITION CLASS (TRAPEZIA)
| Type | Ni-Mh 2/3A |
| Capacity | 1600mah |
| Voltage | 6.0V |
| Weight | 115.6g / 4.07 oz |
, , , , , , Specifications:, , , , , , , , , , , Competition class, , ,
Features: ACE Ni-Mh 1600mAh/6.0V HP 2/3A Battery Pack W/JR Connector ...HiModel
SWITCH HARNESS W/ FUTABA & JR COMPATIBLE CONNECTORS
| Length | 47cm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Switch harness with Futaba & JR compatible connectors. Includes/Requires: ...HiModel
HIMODEL 2200MAH 11.1V LITHIUM POLYMER (TX) BATTERY FOR TRANSMITTERS - FLAT
| Size | 100x45x13.5 mm |
| Weight | 124g / 4.38 oz |
| Capacity | 2200mAh |
| Voltage | 11.1V |
| Connector | FUTABA AND JR standard |
, , , , , , Specifications:, , , , , , , , , , , HiModel 2200mAh 11.1V Lithium Polymer (TX) Battery for Transmitters, , ,
Features: Specially designed to use as replacement of TX Ni-Mh/Ni-Cd ...5 Reviews
HiModel
HIMODEL 2200MAH 11.1V LITHIUM POLYMER (TX) BATTERY FOR TRANSMITTERS
| Size | 95x30x18mm |
| Weight | 114g / 4.03 oz |
| Capacity | 2200mAh |
| Voltage | 11.1V |
| Connector | FUTABA AND JR standard |
, , , , , , Specifications:, , , , , , , , , , , HiModel 2000mAh 11.1V 15C Lithium Polymer (TX) Battery for Transmitters, , ,
Features: Specially designed to use as replacement of TX Ni-Mh/Ni-Cd ...2 Reviews
HiModel
MINI USB SIMULATOR INTERFACE CABLE
| ●Supporting system | Windows ME, Windows 2000, Windows XP. |
| http | //n.ethz.ch/student/mmoeller/fms/index_e.html |
, , , , , , Specifications:, , , , , , , , , , , ●Plug and Play., ●USB 1.1/ USB 2.0 Compatible., ●USB interface unit features connectors compatible with most Futaba and JR transmitters., Visit FMS website at, to download simulator software at free of charge, then plug & play., , ,
Features: This is the latest mini size USB type simulator. ...4 Reviews
HiModel
MINI USB SIMULATOR INTERFACE CABLE SIM X12
| http | //n.ethz.ch/student/mmoeller/fms/index_e.html |
Specifications:, ●USB interface unit features connectors compatible with most Futaba and JR transmitters., Visit FMS website at, to download simulator software at free of charge, then plug & play., * Simulator software is NOT included, this is the USB interface with conversion cables only., ,
Features: This is the mini size USB type simulator. The ...