SDSHobby
L SHAPED SERVO PROTECTOR/HOLDER/ ROBOT HOLDER MG013-5PCS/BAG
| Material | 2mm hard aluminum board |
| Surface Treatment | sand blasted and anodized |
| Dimension | 35x30mm |
| Weight | 10g |
| This holder is processed by CNC machine, error for hole site | ±0.1mm, angle error |
Specifications:, Application: suitable for Korean servo HS322、HS422, Towerpro MG995 , MG996、SG5010 servos, supporting Hitec、Parallax、Futaba、Towerpro servos with 35*30mm size., Kindly Remark:,
SDSHobby
LEOPARD 3 SLOT 5600KV SENSORED BRUSHLESS INRUNNER MOTOR LBWR3650-6.5T FOR RC CAR AND BOAT
Specifications:, Max Current:, 45A, LiPo Cells:, S, Ni-MH/Ni-Cd Cells:, 4-6S, KV Value:, 5600KV, Resistance:, 0.0087, :, 4.8A, Motor Diameter*Length (mm):, Φ, Installation Hole Depth:, 4mm, Extended Shaft Length (mm):, 15mm, Extended Shaft Diameter (mm):, Φ, Weight:, 170g,
No Load Current ( 7.4V ) 35.8×52.5 3.175SDSHobby
LEOPARD 3 SLOT 6650KV SENSORED BRUSHLESS INRUNNER MOTOR LBWR3650-5.5T FOR RC CAR AND BOAT
Specifications:, Max Current:, 50A, LiPo Cells:, S, Ni-MH/Ni-Cd Cells:, 4-6S, KV Value:, 6650KV, Resistance:, 0.0072, :, 5.7A, Motor Diameter*Length (mm):, Φ, Installation Hole Depth:, 4mm, Extended Shaft Length (mm):, 15mm, Extended Shaft Diameter (mm):, Φ, Weight:, 170g,
No Load Current ( 7.4V ) 35.8×52.5 3.175SDSHobby
LEOPARD LBP5682-2Y KV1360 4 POLES INRUNNER BRUSHLESS MOTOR FOR RC CAR
| KV (RPM/V) | 1360 |
| Weight (g) | 758 |
| Max Power (W) | 4500 |
| Max Current(A) | 152 |
| Resistance (ohm) | 0.0058 |
| No-load Current(7.4V) | 4.1A |
| Li-Po Battery | 4-8S |
Specification:, , Motor Diameter (mm): 56, Motor Length (mm): 82, Extended Shaft Length (mm): 20, Extended Shaft Diameter (mm): 6, Banana Plug Diameter(mm): 6, Installation Hole Depth(mm): 8, Max Voltage(V): 29, Recommended Equipments (need to buy separately):,
SDSHobby
LEOPARD 2 POLES 3 SLOTS 3200KV SENSORLESS BRUSHLESS INRUNNER MOTOR LBG3650/9.5T FOR RC CAR AND BOAT
Specifications:, Max Current:, 30A, LiPo Cells:, -4S, Max Power:, 580W, KV Value:, 3200KV, Resistance:, 0.0205, :, 1.4A, Motor Diameter*Length (mm):, Φ, Installation Hole Depth:, 5mm, Extended Shaft Length (mm):, 15mm, Extended Shaft Diameter (mm):, 3.175, Weight:, 170g,
No Load Current ( 7.4v) 35.8×52.5SDSHobby
WATERPROOF LED NIGHT LIGHT BELT WITH ADHESIVE PATCH FOR AIRCRAFT MODEL (WHITE) L=1M
| Yellow | WPLED-Y |
| Red | WPLED-R |
| Blue | WPLED-B |
| Green | WPLED-G |
| Warm white | WPLED-SW |
Kindly Remark:, Picture just for reference!, Features:, Note:, The light belt also has other colors, the color and its related ITEM NO. are as follows:,
The difference between non-waterproof and waterproof is the waterproof membrane ...SDSHobby
GENS ACE NEW DESIGN HIGH QUALITY 2200MAH 25C 4S 14.8V LIPO BATTERY WITH T PLUG
Specifications:, Capacity:, 200mAh, Discharge Rate:, 5C, Voltage:, 14.8V, Charge Current:, Max.4.4A (2C), Charge Voltage:, 16.8V, Continuous Discharge Current:, Max 55.0A, Dimension (H*W*L)(mm):, 33.40*33.30*108.00, Net Weight (g):, 48, Features:,
A layer of wire cover and sponge are wrapped around ...SDSHobby
GENS ACE NEW DESIGN HIGH QUALITY 2200MAH 25C 3S 11.1V LIPO BATTERY WITH T PLUG
Specifications:, Capacity:, 200mAh, Discharge Rate:, 5C, Voltage:, 11.1V, Charge Current:, Max.4.4A (2C), Charge Voltage:, 12.6V, Continuous Discharge Current:, Max 55.0A, Dimension (H*W*L)(mm):, 6.40*33.70*107.30, Net Weight (g):, 198, Features:,
A layer of wire cover and sponge are wrapped around ...SDSHobby
GENS ACE NEW DESIGN HIGH QUALITY 2200MAH 20C 3S 11.1V LIPO BATTERY WITH T PLUG
Specifications:, Capacity:, 200mAh, Discharge Rate:, 0C, Voltage:, 11.1V, Charge Current:, Max.4.4A (2C), Charge Voltage:, 12.6V, Continuous Discharge Current:, Max 44.0A, Dimension (H*W*L)(mm):, 5.00*33.30*105.08, Net Weight (g):, 186, Features:,
A layer of wire cover and sponge are wrapped around ...SDSHobby
GENS ACE NEW DESIGN HIGH QUALITY 1000MAH 25C/2S 7.4V LIPO BATTERY WITH T PLUG
Specifications:, Capacity:, 1000mAh, Discharge Rate:, 5C, Voltage:, 7.4V, Charge Current:, Max.2.0A (2C), Charge Voltage:, 8.4V, Continuous Discharge Current:, Max 25.0A, Dimension (H*W*L)(mm):, 14.56*34.78*70.90, Net Weight (g):, 70, Features:,
A layer of wire cover and sponge are wrapped around ...SDSHobby
GREEN 1 METER SUPER BRIGHT WATERPROOF LED NIGHT STRIP LIGHT/ LED STRAP LIGHT/ LED LIGHT BAR 12V WITH 3M ADHESIVE PATCH
Features:, Working Voltage:, DC 12V, Power:, 12W per meter, Brightness:, 900LM per meter, Maximum Current:, , Note:, The light strip also has five colors, the color and its related ITEM NO. are as follows:, Red:, WPSLB-R, Yellow:, WPSLB-Y, Blue:, WPSLB-B, Green:, WPSLB-G, White:, WPSLB-W,
The dimension of the light is 5mm*5mm 5A per meter ...SDSHobby
GT POWER 2S--3S DC LIPO CHARGER WITH PARALLEL CHARING SYSTEM NEW ITEM IN 2012
| Cells of Lilo/Lipo | 2-3S (7.4V or 11.1V) |
| Input voltage | DC 10.0~15.0V |
| Output current | 0.8A |
Specifications:,
SDSHobby
GT POWER B6-20 BALANCE CHARGER AND DISCHARGER INPUT MAX. 400W 20A
| Operating voltage range | 11.0~18.0V |
| Charge current range | 0.1~20.0A |
| Discharge current range | 0.1~5.0A |
| Maximum charge power capacity | 400W |
| Maximum discharge power capacity | 25W |
| Current drain for balancing Lipo | 200mAh/cell |
| NiCd/Ni-MH battery cell count | 1~18S |
| Lithium battery cell count | 1~6S |
| Pb battery voltage | 2~24V |
| Weight | 820g |
| Dimension | 152*145*57mm |
Specifications:,
SDSHobby
GT POWER A6-20 BALANCE CHARGER AND DISCHARGER INPUT MAX. 400W 20A
| Operating voltage range | 11.0~18.0V |
| Charge current range | 0.1~20.0A |
| Discharge current range | 0.1~5.0A |
| Maximum charging power | 400W |
| Maximum discharging power | 25W |
| Current drain for balancing Lipo | 200mAh/cell |
| Cells of NiCd/Ni-MH battery | 1~18S |
| Cells of Lithium battery cell count | 1~6S |
| Pb battery voltage | 2~24V |
| Weight | 820g |
| Dimension | 152*145*57mm |
Specifications:,
SDSHobby
HIGH QUALITY CNC METAL SERVO RUDDER MOUNT SET WITH 4.5IN DOUBLE ARM
Features:, The rudder mount has two bearings inside. It makes the movement smoothly and precisely., Include:, 4.5" Rudder Arm (other available size:, 3.5", 5'' rudder arms for reference),
Rudder Tray Titanium pushrod 2pcs M3x16 screw 4pcs M3 locknut ...