HobbyKing
TURNIGY 3600MAH 2S 12C LIPO RECEIVER PACK
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 12C |
| Pack Weight | 186g |
| Pack Size | 77 x 45 x 27.5mm |
| Charge Plug | JST-XH |
| Discharge Plug | JR style |
Minimum Capacity:, 3600mAh (True 100% Capacity),
The number one in performance, value and price! The new ...5 Reviews
HobbyKing
NI-ZN 4.8V 1500MAH FLAT RECEIVER PACK
| Capacity | 1500mAh |
| Voltage | 4.8V |
| Chemistry | Ni-ZN High Voltage |
| Weight | 78g |
| Dimensions | 52x43x15mm |
Specifications:, Discharge Plug:JR, *Note:, When charging these Ni-ZN cells, set your charger to Ni-CD/Ni-MH mode using CV (constant voltage) charge function. Set the cutoff voltage to 1.9V per cell.,
Turnigy Ni-ZN (Nickel-Zinc) batteries offer high voltage and excellent cycle ...5 Reviews
HobbyKing
NI-ZN 4.8V 1500MAH RECEIVER PACK
| Capacity | 1500mAh |
| Voltage | 4.8V |
| Chemistry | Ni-ZN High Voltage |
| Weight | 78g |
| Dimensions | 52x29x29mm |
Specifications:, Discharge Plug:JR, *Note:, When charging these Ni-ZN cells, set your charger to Ni-CD/Ni-MH mode using CV (constant voltage) charge function. Set the cutoff voltage to 1.9V per cell.,
Turnigy Ni-ZN (Nickel-Zinc) batteries offer high voltage and excellent cycle ...5 Reviews
HobbyKing
TURNIGY LSD 4.8V 2300MAH NI-MH RECEIVER PACK
| Category | Rechargeable Ni-MH |
| Capacity | 2300mAH |
| Voltage | 4.8V |
| Weight | 118g |
| Dimensions | 52x29x29mm |
Specifications:, Chemistry:, NiMH Low Self Discharge, Discharge plug:JR,
This 4 cell 4.8V 2300mAh Ni-MH receiver pack offers long ...5 Reviews
HobbyKing
TURNIGY LSD 6.0V 2300MAH NI-MH FLAT RECEIVER PACK
| Category | Rechargeable Ni-MH |
| Capacity | 2300mAh |
| Voltage | 6.0V |
| Weight | 148g |
| Dimensions | 72x52x15mm |
Specifications:, Chemistry:, NiMH Low Self Discharge, Discharge plug:JR,
This 5 cell 6.0V 2300mAh Ni-MH receiver pack offers long ...5 Reviews
HobbyKing
TURNIGY LSD 4.8V 2300MAH NI-MH FLAT RECEIVER PACK
| Category | Rechargeable Ni-MH |
| Capacity | 2300mAH |
| Voltage | 4.8V |
| Weight | 120g |
| Dimensions | 58x52x15mm |
Specifications:, Chemistry:, NiMH Low Self Discharge, Discharge plug:JR,
This 4 cell 4.8V 2300mAh Ni-MH receiver pack offers long ...5 Reviews
RCPlanet
JQ PRODUCTS RECEIVER BATTERY NIMH2/3A LP 1200MAH 6V JQPR0033
, Type:, 2/3 A NiMH Receiver, Capacity:, 1200mAh, Voltage:, 6.0V Nominal, Number of Cells:, 5, Weight:, 112 Grams, Dimensions (WxLxH):, 32x84x18mm, Configuration:, 5-Cell Flat, Connector:, JR Style, ,
This is the JQ Products 2/3A Lp 1200mAH 6V NiMh ...HiModel
3.5-7V RX BATTERY VOLTAGE LEVEL LED INDICATOR
| Wire length | 28cm |
| Working voltage | 3.5 to 7V (typically for 4.8V or 6V RX battery) |
| Connector type | Futaba/JR compatible |
| 5V above | green LED |
| 5-4.5V | Green , flash slowly |
| 4.5-4V | Red LED |
| Below 4V | Red LED, quick flash |
, , , , , , Specifications:, , , , , , , , , , , 3.5-7V RX Battery Voltage Level Indicator, Weight: 4g, Working current: , Status:, * This unit can only work under 7V, and can not connect directly to 2S Lipo., , ,
HiModel
HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-1
| Input | 6~8.4v |
| BEC output current | 2A to receiver |
| Connector type | JR/Futaba compatible |
| Wire length | 30mm |
| Weight | 13g / 0.46oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has one servo output, and one receiver output., * The receiver output must connect to the matching channel of the servo, for example, if the servo is for elevator, then the receiver connector should be plugged to the RX elevator channel., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
4-WAY HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-4
| Input | 6~8.4v |
| BEC output current | 2A to receiver |
| Connector type | JR/Futaba compatible (4 connectors for servos, 4 connectors to receiver) |
| Wire length | 30mm |
| Weight | 32g / 1.13oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has 4 servo outputs., Wiring hint: simply plug the 4 servos to the servo outputs, and connect the matching RX connectors to the relative channels., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 100CM
| Length | 100 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extensionHiModel
60-CORE WIRE LARGE CURRENT Y LEAD 15CM
| Length | 15 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires large current Y lead, , ,
Includes/Requires: Includes:1 x Y leadHiModel
3-IN-1 15A UBEC STEP DOWN SWITCH HARNESS W/LED VOLTAGE METER
| Input volt range | 6V to 13V |
| Max Current | 0-15A ( MAX |
| Output voltage | 4.8-9.6V (stepless adjustable, factory default voltage |
| Wire type | silicon wire |
| Connector Type | output Futaba/JR compatible |
| Weight | 60g |
| Dimension | 64mm ( L ) * 27mm ( W) * 35mm ( H ) |
, , , , , , Specifications:, , , , , , , , , , , 3-in-1 15A UBEC Step Down Switch Harness W/LED Voltage Meter, input JST connector, , ,
Features: Using ultra high brightness led segment which can ...HiModel
60-CORE WIRE LARGE CURRENT SWITCHING HARNESS W/CHARGING PORT
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core Wires Large Current Switching Harness W/Charging Port, , ,
Includes/Requires: Includes: 1 x Switching Harness W/Charging PortHiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 50CM
| Length | 50 CM |
| Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extension