SDSHobby
MAX FORCE 25Cˆ•4400MAHˆ•6S1P/ 22.2V LIPO BATTERY FOR 600 HELICOPTER
| Max Charging Current | 5C/22A |
| Max Cont. Discharging Current | 25C/110A |
| Max Burst Discharging Current | 45C/198A |
| Size | H59*W43*L135mm |
| Net Weight | 635g |
| Plug Types | T Plug |
| Application | for 600 helicopter |
Specifications:, Kindly Remark:, Pictures for reference only, because the product constantly upgrade, so the appearance of the few products maybe small change, but the technology parameters is perfectly, quality is guaranteed.,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
MAX FORCE 25C∕2200MAH∕11.1V LIPO BATTERY
| Max Charging Current | 5C/11A |
| Max Cont. Discharging Current | 25C/55A |
| Max Burst Discharging Current | 50C/110A |
| Size | H26*W34*L105mm |
| Net Weight | 182g |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,
SDSHobby
MAX FORCE 20C∕2200MAH∕11.1V LIPO BATTERY
| Max Charging Current | 5C/11A |
| Max Cont. Discharging Current | 20C/44A |
| Max Burst Discharging Current | 40C/88A |
| Size | H26*W34*L105mm |
| Net Weight | 182g |
| Plug Type | Deans Plug and Balance Chargeable Plug |
Specifications:,
SDSHobby
MAX FORCE 2000MAH/ 11.1V LI-PO BATTERIES FOR JR, FF9, EX10 ETC. TRANSMITTER
| Max Charging Current | 5C/10A |
| Size | L111*W25*H22 mm |
| Net Weight | 180g |
| Plug Types | JR&FUTABA Plug |
| Application | JR, FF9, EX10 etc. transmitter |
Specifications:,
ï1⁄4‹ Balance Chargeable PlugSDSHobby
MAX FORCE 2000MAH/11.1V LI-PO BATTERIES FOR 3PK, M11, 4VF ETC. TRANSMITTER
| Max Charging Current | 5C/10A |
| Size | L111*W55*H14 mm |
| Net Weight | 228g |
| Plug Types | FUTABA Plug |
| Application | 3PK, M11, 4VF etc. transmitter |
Specifications:,
ï1⁄4‹ Balance Chargeable PlugHobbyKing
TURNIGY 5000MAH 2S2P 40C HARDCASE PACK (ROAR APPROVED)
Hardcase Lithium Polymer pack for high-end performance brushless electric or modified brushed motor cars.Big capacity and C rate give up to 250A for 20seconds and up to 300A for instant throttle punches.Hard case pack ensures the battery wont get damaged from the g-forces and shock associated with R/C vehicles.40C is the genuine rating of which the battery will hold voltage well above 3.4vOther vendors claim their packs to be 40C when in fact they are not. Based on other vendors calculations this would be a 50 or even 60C pack.All TURNIGY packs are resistance matched. Spec.Minimum Capacity: 5000mAhConfiguration: 2S2P / 7.4v / 4CellConstant Discharge: 40CPeak Discharge (22sec): 50CPack Weight: 326gPack Size: 137.5 x 46 x 25mmCharge Plug: JST-XH Discharge plug: 5.5mm Bullet-connector Now officialy approved by ROAR for race use!,
5 Reviews
HobbyKing
4MM GOLD CONNECTORS - LOW PROFILE (10PC)
Pro Tip:, If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.,
4mm Gold Connectors - Low Profile (10pc) Ideal for use ...5 Reviews
SDSHobby
LED SLIDE SWITCH + SAFE PROTECTIVE COVER/ EMULATIONAL STARTING SWITCH
| Input voltage of LED switch | DC 12V |
| Attention | Color will be sent randomly. |
Product Description:, Application: suitable for DIY some electronic equipment, also use for fire control switch on the plane, missile launching switch and forcing burner switch etc.. Now it is widely used on automotive refit.,
Hobby-Lobby
DEANS PAIR PIN CONNECTORS, PAIR
,
Deans Connectors - excellent for electric Slowflyers Tiny, light, reliable. ...Hobby-Lobby
DEANS PAIR PIN POLARIZED CONNECTORS, PAIR
,
Deans Connectors - excellent for electric Slowflyers Tiny, light, reliable. ...Hobby-Lobby
DEANS 3 PIN CONNECTORS, PAIR
,
Deans Connectors - excellent for electric Slowflyers Tiny, light, reliable. ...HobbyKing
TURNIGY BATTERY CHARGE MARKER (10PCS/BAG)
| Dimensions | 25x12x3mm |
| Weight | 0.3g |
Specs:,
We've all done it before, you power up your model ...5 Reviews
HiModel
EZRUN-18A BRUSHLESS ESC FOR 1/18 CAR (SPORTFUL RACE) V2
| ● Output | Continuous current 18A, burst current 50A. |
| ● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. |
| ● BEC Output | 6V/1A. |
| ● Resistance | 0.01 Ohm. |
| ● Motor Supported | Sensorless Brushless Motor |
| ● Suitable Brushless Motor | 12T and > 12T |
| ● Suitable Car | 1/18 on-road or off-road cars / trucks for normal race or sportful race. |
| ● Size | 31.5mm(L) * 24mm(W) * 15mm(H). |
| ● Weight | 19g(Without wires) |
, , , , , , Specifications:, , , , , , , , , , , Specification:, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-25A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE)25A-L V2
| ● Output | Continuous current 25A, burst current 90A. |
| ● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
| ● BEC Output | 6V/1.5A. |
| ● Resistance | 0.0015 Ohm. |
| ● Motor Supported | Sensorless Brushless Motor |
| ● Suitable Brushless Motor | 9T and > 9T |
| ● Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
| ● Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| ● Weight | 30g(Without wires) |
| For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-35A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE) V2
| ●Output | Continuous current 25A, burst current 90A. |
| ●Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
| ●BEC Output | 6V/1.5A. |
| ●Resistance | 0.0015 Ohm. |
| ●Motor Supported | Sensorless Brushless Motor |
| ●Suitable Brushless Motor | 9T and > 9T |
| ●Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
| ●Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| ●Weight | 30g(Without wires) |
| For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ●Compatible with all sonsorless brushless motor. ●Use top ...3 Reviews