HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
2.4G 6-CHANNEL MICROLITE DSM2 /DSMX RECEIVER SBUS610E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 50x30x13mm |
| ◆ Voltage Range | 3.6-9.6v |
| ◆ Antenna Length Main RX | 30mm*2 |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 8g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 6channels ◆ 1channels SBUS output ◆ ...3 Reviews
HiModel
2.4G 3-CHANNEL MICROLITE DSM2 /DSMX RECEIVER S3100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 3-Channel Full-Range DSM2 Receiver （1 S.BUS output） |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 3channels ◆ 1channels S.BUS output（1S.BUS output） ...3 Reviews
HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 4100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
2.4G 9-CHANNLE DSM2 MICROLITE RECEIVER (JR/SPEKTRUM COMPATIBLE)
SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ..." />
| ◆ Type | 9-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
| ◆ Weight | 19g |
| ◆ Voltage Range | 4-10v |
| ◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
| ◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...2 Reviews
HiModel
2.4G 6-CHANNLE DSM2 MICROLITE PARK FLYER RECEIVER AR6110E (JR/SPEKTRUM COMPATIBLE)
SPEKTRUM Compatible DSM2 2.4G Micro Receiver. Includes/Requires: Includes:1 x ..." />
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 21mm x 28.7mm x 10mm |
| * Weight | 4.0 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: JR/SPEKTRUM Compatible DSM2 2.4G Micro Receiver. Includes/Requires: Includes:1 x ...HiModel
2.4G 9-CHANNLE MICROLITE DSM2 RECEIVER W/ SATELLITE (JR/SPEKTRUM COMPATIBLE)
SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ..." />
| ◆ Type | 9-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
| ◆ Weight | 19g |
| ◆ Voltage Range | 4-10v |
| ◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
| ◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Wireless simulator interface(W.D.S.C), 1. Main receiver and satellite must connect., 2. Receiver must bind with transmitter first (AUX4 channel do not plug binding harness), 3. AUX3 is the (W.D.S.C) channel, connect with simulator line, 4. BIND channel and AUX4 channel plug the binding harness, 5. Apply power to the receiver with USD line or battery, 6. Turn transmitter on, now both LEDS keep light and simulator works, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...1 Reviews
HiModel
2.4G 6-CHANNEL PARK FLYER RECEIVER AR6100E (JR/SPEKTRUM COMPATIBLE)
| * Type | Park flyer, Foamies, Up to 400 class helis |
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 20mm x 36mm x 11.6mm |
| * Weight | 4.9 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: The AR6100e weighs less than 4.9 grams. The AR6100e ...2 Reviews
HiModel
2.4G JR DSX9MK II 9-CHANNEL DSM2 RADIO (BACKLIGHT) W/RD921 RX (NO SERVO)
| -Method | DSM2 |
| -Number of Channels | 9Ch |
| -Transmitter Weight | 810g (excluding battery) |
| - Stick mode | mode 2 (throttle on left hand) will be sent by default, mode 1 is available upon request. |
, , , , , , Specifications:, , , , , , , , , , , * We only accept bank wire transfer (T/T) or western union money transfer for new customers for this product., *, Technical_hints_2.4G.pdf Technical hints on usage of 2.4G radios., , , ,
Features: JR Propo DSX9II Transmitter - Multi-Data Graphic Display with ...