SDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (PLASTIC TRIPOD) + PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity>20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Controller*1pcs, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Plastic Tripod)SDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (PLASTIC TRIPOD) +MOTOR +ESC +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh LiPo battery (Burst Discharge Capacity>20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Controller*1pcs, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Plastic Tripod)SDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER ARF WITH FRAME (PLASTIC TRIPOD) +MOTOR +ESC +CONTROLLER +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity >20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Plastic Tripod) Controller*1pcsSDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (CARBON FIBER TRIPOD) +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity >20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Carbon Fiber Tripod) Controller*1pcsSDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (CARBON FIBER TRIPOD) +MOTOR +ESC +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity>20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Carbon Fiber Tripod) Controller*1pcsSDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER ARF WITH FRAME +MOTOR +ESC +CONTROLLER +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity >20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
812 brushless motor, KV910, 4pcs Bumblebee Frame*1pcs (Carbon Fiber Tripod) ...SDSHobby
HML650 RETRACTABLE LANDING GEAR FOR HMF S550 TAROT 650/680PRO FRAME/QUADCOPTER/ HEXACOPTER/MULTICOPTER PHOTOGRAPHY
| Power support | 6s battery |
Features:, Recommended Quadcopter and Hexacopter frame:, wheelbase is between 450mm-700mm and flying weight is less than 4KG, Introduction:, The retractable landing gear is designed for the Multicopter Frame in order to provide a better perspective in aerial-filming/photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible. It is essential goods for triaxial aerial-filming gimbal such as Gopro 3 gimbal., Tips:, If the switch channel on the TX has fail-safe function, set the fail-safe value to [Lower] position, so that the landing gear will be in [Lower] status when the receiver enters fail-safe, to land the aircraft safely.,
Very easy to install, just two minutes. The whole weight ...SDSHobby
ST330 FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME +MOTOR +PROP
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height:, , Carton Size (L*W*H):, , Including the Following Equipments:, Plastic Prop:, , Motor:, 210 brushless motor, KV910, 4pcs, -Weight:, 75g, -No Load Current:, 0.7A/11.1V, --Motor Outer Diameter:, 35mm, -Zinc Plate:, (outer dia.) 22mm, (Height) 12mm, Recommended Equipments for Ready to Fly (need to buy separately):, High Speed Brushless ESC:, 0A, Radio Control System:, , Battery:,
50g 820g~1150g 00g 1200g Over 10min 330mm 116mm 415mm * ...SDSHobby
ST330 FOUR-AXIS FLYER/QUADCOPTER ARF WITH FRAME +MOTOR +ESC +CONTROLLER +PROP
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height:, , Carton Size (L*W*H):, , Including the Following Equipments:, Plastic Prop:, , Motor:, 210 brushless motor, KV910, 4pcs, High Speed Brushless ESC:, 0A, Recommended Equipments for Ready to Fly (need to buy separately):, Radio Control System:, , Battery:,
50g 820g~1150g 00g 1200g Over 10min 330mm 116mm 415mm * ...SDSHobby
ST450 FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME +MOTOR + PROP
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height of After Fold:, , Carton Size (L*W*H):, , Including the Following Equipments:, Prop:, , Motor:, , -Weight:, 75g, -No Load Current:, 0.7A/11.1V, --Motor Outer Diameter:, 35mm, -Zinc Plate:, (outer dia.) 28mm, (Height) 12mm, Recommended Equipments for Ready to Fly (need to buy separately):, High Speed Brushless ESC:, 0A, 4pcs, Radio Control System:, , Battery:,
85g 700g 00-500g 1300g Over 10min 450mm 125mm 480mm * ...SDSHobby
ST450 FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME +PROP
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height of After Fold:, , Carton Size (L*W*H):, , Including the Following Equipments:, Prop:, , Recommended Equipments for Ready to Fly (need to buy separately):, Motor:, , High Speed Brushless ESC:, 0A, 4pcs, Radio Control System:, , Battery:,
85g 700g 00-500g 1300g Over 10min 450mm 125mm 480mm * ...SDSHobby
ST450 FOUR-AXIS FLYER/QUADCOPTER ARF WITH FRAME +MOTOR +ESC +CONTROLLER +PROP
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height of After Fold:, , Carton Size (L*W*H):, , Including the Following Equipments:, Prop:, 10*3.8(2pcs), 10*3.8P(2pcs), Motor:, 212 brushless motor, KV910 , 4pcs, High Speed Brushless ESC:, 0A, 4pcs, Recommended Equipments for Ready to Fly (need to buy separately):, Radio Control System:, , Battery:,
85g 700g 00-500g 1300g Over 10min 450mm 125mm 480mm * ...SDSHobby
FRAME FOR ST330 FOUR-AXIS FLYER/QUADCOPTER
Performance Parameters:, Empty Frame Weight:, , Flying Weight:, , Payload Capability:, , Maximum Gross Take-Off Weight:, , Flight Time:, , Wheelbase:, , Height:, , Carton Size (L*W*H):, , Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Plastic Prop:, , Motor:, , High Speed Brushless ESC:, 0A, 4pcs, Radio Control System:, , Battery:,
50g 820g~1150g 00g 1200g Over 10min 330mm 116mm 415mm * ...SDSHobby
X-CAM KONGCOPTER 550 FRAME X-BUG ALIEN QUADCOPTER/ REPTILE QUADCOPTER AQ550 WITH 25MM ARM
Features:, The Drone frame is made of fiber glass with plastic motor mounts- aluminum arms. The motor mount supports, Specifications:, Wheelbase:, 550mm, Weight:, about 700g, Propeller size:, 12 inches, Recommended Configuration (Not included):, Motor:, TM2216 KV900, Propeller size:, 8-12 inches (such as, Battery:, 4S 5000mAh, Gimbal:, X-CAM X100B+ with GOPRO3 (280g), Flight time:, 12 Minutes, Total weight:, kg with all electronic equipment and battery,
-35mm diameter motors - one arm can be assembled 2 ...SDSHobby
BRACKET/ FRAME MOUNT FOR ST360 QUADCOPTER/ FOUR-AXIS FLYER WITH 4PCS 8045 PROPELLERS
| 11.1V 3S 1800mah~3300mah 20C (Flying time | more than 10min ) |
| KK Control Board (such as | CB-KK |
| MWC Control Board (such as | CB-MWC |
Performance:, Wheelbase:, 360mm, Total Height:, 90mm, Weight (without prop):, 170g, Box Size (L*W*H):, 65mm * 220mm * 50 mm, Weight of ST360-KIT:, , Package Contents:, Recommended Equipments:, Battery:, ESC:, ST20A * 4pcs, Motor:, ST2210 * 4pcs, Radio Control:, , Control Board:,
395g (360 frame + 8045 Prop*4pcs) Aluminum alloy mounting board ...