ReadyMadeRC
GEMFAN CARBON FIBER PROPELLER - 15 X 5.5 APC (2PCS, CW & CCW)
,
These Gemfan Carbon Fiber props are an excellent choice for ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS
ATTENTION | According to |
Wingspan | 2520MM/ 99.2inch |
Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
Customized Motor for Airtitan | M60K/ Power 1500W |
Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
Propeller recommend | 15*6 / 15*7 |
ESC | Advanced 80A OPTO (without Built-in BEC) |
External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
Material of fuselage and Wing | EPO |
RMRC 6s batteries found here | 10,000 mAh |
Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS
ATTENTION | According to |
Wingspan | 2520MM/ 99.2inch |
Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
Customized Motor for Airtitan | M60K/ Power 1500W |
Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
Propeller recommend | 15*6 / 15*7 |
ESC | Advanced 80A OPTO (without Built-in BEC) |
External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
Material of fuselage and Wing | EPO |
RMRC 6s batteries found here | 10,000 mAh |
Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
GEMFAN ELECTRIC PROPELLER - 10 X 5 (2PCS)
APC-E style ..." />
,
These Gemfan Electric props are very similar to APC-E style ...ReadyMadeRC
GEMFAN ELECTRIC PROPELLER - 10 X 7 (2PCS)
APC-E style ..." />
,
These Gemfan Electric props are very similar to APC-E style ...ReadyMadeRC
GEMFAN ELECTRIC PROPELLER - 13 X 6.5 (1PC)
APC-E style ..." />
,
These Gemfan Electric props are very similar to APC-E style ...ReadyMadeRC
GEMFAN ELECTRIC PROPELLER - 14 X 7 (1PC)
APC-E style ..." />
,
These Gemfan Electric props are very similar to APC-E style ...ReadyMadeRC
GEMFAN ELECTRIC PROPELLER - 4.75 X 4.75 (2PCS)
APC-E style ..." />
,
These Gemfan Electric props are very similar to APC-E style ...ReadyMadeRC
RMRC ANACONDA - PNP (WITH INSTALLED MOTOR, ESC, AND SERVOS)
Wingspan | 2,060mm |
Wing Area | Approx. 4,900cm |
Length | 1,410mm |
Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
Propeller (sold separately) | Recommend |
ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
Recommended Flap servos | HS-81 |
Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
Center of Gravity | 1/3 of wing from leading edge on the main spar |
Approximate flight duration | 45 minutes to over an hour depending on configuration |
Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos After ...