R/C Controlled On-Off Switch
|Operating Voltage||5VDC max, powered by R/C receiver.|
|Switched Output||Transistorized type, 30V / 10A max rating.|
|Compatibility||Most R/C receivers (Failsafe requires PPM Rx).|
|Servo Cable||Universal R/C type, 6 inches (150mm).|
|Switch Cable||Silicone wires, 3 inches (80mm).|
Notes: The failsafe feature is compatible with standard PPM receivers. It will be ignored if used with DSP, PCM, or Spread Spectrum R/C systems. Also, if the switched output is powered by a separate battery, a common ground connection is required to the R/C system's battery (details are in the instruction manual).,
Plug this electronic switch into any spare channel on your R/C receiver and instantly have a remote On / Off switch! The switched output is controlled when the R/C channel passes 50% throw.
It can be used in a variety of R/C applications. For example, connect it to a suitable relay and use it to switch between two video camera signals. Or, control low voltage lights on your R/C model or robot. The possibilities are endless.
Manufactured by Turnigy Power Systems.
Check price and availability
Found 7 years, 3 months ago