HobbyKing
X8-H 2.4GHZ HITEC MODULE
Hitec ..." />
RF Module | X8-H |
Compatible with:, HITEC:, Aurora 9, Optic 6 and Eclipse 7, Included:, Accessories:, Binding plug & Antenna,
The X8-H module from Assan now offers users of Hitec ...5 Reviews
HobbyKing
2.4GHZ A-FHSS COMPATIBLE 8CH RECEIVER (HITEC MINIMA COMPATIBLE)
Hitec ..." />
Operating Voltage Range | 3.5V~16V |
Operating Current | 30mA |
Operating Range | Full Range (>1.5km) |
Dimension | 44x24x14mm |
Weight | 9.3g |
Compatibility:, Compatible with Hitec Minima series 2.4Ghz A-FHSS transmitters, Features:, • Hitec Minima 2.4Ghz A-FHSS Compatible, Specs:, Number of Channels:8, *Note:, This unit is not designed, manufactured or supported by Hitec, nor is it a copy of a Hitec receiver.,
These receivers are a great option for users of Hitec ...5 Reviews
HobbyKing
2.4GHZ A-FHSS COMPATIBLE 5CH MICRO RECEIVER (HITEC MINIMA COMPATIBLE)
Hitec ..." />
Operating Voltage Range | 3.0V~7.2V |
Operating Current | 20mA |
Operating Range | >300m |
Dimension | 21x16x5.8mm |
Compatibility:, Compatible with Hitec Minima series 2.4Ghz A-FHSS transmitters, Features:, • Hitec Minima 2.4Ghz A-FHSS Compatible, Specs:, Number of Channels:5, Weight:2g, *Note:, This unit is not designed, manufactured or supported by Hitec, nor is it a copy of a Hitec receiver.,
These receivers are a great option for users of Hitec ...5 Reviews
RCPlanet
HITEC 24"" WIRE AILERON EXT GOLD PIN HRC54611S
Hitec heavy duty 24" twisted wire servo extension with Hitec-S, ..." />
, Wire Gauge:, 20, Wire Color Codes, JR, Brown:, ground, Red:, positive, Orange:, signal, Hitec, Black:, ground, Red:, positive, Yellow:, signal, Airtronics Z, Black:, ground, Red:, positive, Blue:, signal, ,
Hitec heavy duty 24" twisted wire servo extension with Hitec-S, ...HiModel
HITEC 6.4G/ 0.6KG/ .09 SEC SUPER FEATHER SERVO HS-50
Hitec HS-50 servo is a modern miracle of ..." />
Speed | 0.09 sec/60° @ 4.8V |
Torque | 8.33 oz/in @ 4.8V (0.6kg.cm) |
Dimensions | 0.82x0.44x0.86 in / 20.9 x 11.4 x 22 mm |
Weigth | 0.22 oz (6.4g) |
Power Supply | 4.8V (Hitec does NOT recommend using 6V) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: The Hitec HS-50 servo is a modern miracle of ...HiModel
ASSAN 2.4G HITEC COMPATIBLE RF MODULE X8H V2
HITEC COMPATIBLE ..." />
Features:, , Includes/Requires:, , Includes:, 1 x RF module, Hitec compatible X8-H,
THIS IS THE ASSAN 2.4GHZ RF MODULE FOR HITEC COMPATIBLE ...HobbyKing
2.4GHZ A-FHSS COMPATIBLE 4CH MICRO RECEIVER (HITEC MINIMA COMPATIBLE)
Hitec ..." />
Operating Voltage Range | 3.0V~7.2V |
Operating Current | 20mA |
Operating Range | >300m |
Dimension | 30x19x8mm |
Weight | 3.4g |
Compatibility:, Compatible with Hitec Minima series 2.4Ghz A-FHSS transmitters, Features:, • Hitec Minima 2.4Ghz A-FHSS Compatible, Specs:, Number of Channels:4, *Note:, This unit is not designed, manufactured or supported by Hitec, nor is it a copy of a Hitec receiver.,
These receivers are a great option for users of Hitec ...5 Reviews
HobbyKing
TRANSMITTER NECK STRAP BALANCER (JR/SPEKTRUM/HITEC)
Spectrum | DX7/ FF9 |
HITEC | AURORA-9 |
JR: X3810 / 9X / 9XII / 10S / 10X / 12X / DSX7 / DSX9 / DSX12,
Constructed from light weight aluminum this neck strap balancer adjust ...5 Reviews
HobbyKing
2.4GHZ SUPERMICRO SYSTEMS - HK-MFX600-F/H MODULE (FUTABA/HITEC COMPATIBLE)
Frequency | 2.4ghz |
Type | FHSS |
Module Type | Futaba/Hitec |
Transmission Power | 18DBm |
Input Signal | PPM (50mv or 2~5v) |
Input Voltage Range | 5.0~12.0V |
Weight | 42.5g |
Size:, 58.15mm x 37.26mm x 22.05mm,
Perfect for indoor flyers and anyone who likes to tinker ...5 Reviews
HobbyKing
2.4GHZ SUPERMICRO SYSTEMS - HK-MFX600-H (HITEC COMPATIBLE)
Frequency | 2.4ghz |
Type | FHSS |
Module Type | Hitec |
Transmission Power | 18DBm |
Input Signal | PPM (50mv or 2~5v) |
Input Voltage Range | 5.0~12.0V |
Weight | 42.5g |
Size:, 58.15mm x 37.26mm x 22.05mm,
Perfect for indoor flyers and anyone who likes to tinker ...5 Reviews
HobbyWireless
DFT/D8R-II PLUS TELEMETRY COMBO RX/TX FOR FUTABA, HITEC, WFLY
Operating Voltage Range | 6.0V-13.0V |
Operating Current | 50mA |
Output Power | 60mW |
Resolution | 11bit (3072) |
Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
Hitec | Optic 6, Eclipse 7, Prism 7. |
WFLY | WFT09, WFT08. |
Details:, , Note:, All technical questions about FrSKy products must to be emailed to frsky@frsky-rc.com,
This combo receiver and tarnsmitter module will not only give ...RCPlanet
KIMBROUGH SERVO ARMS HITEC KIM132
, T-shaped, one leg measures 1 1/2 long , and the other measures 9/16", Fits Hitec, Tower and Hobbico , servos., , ,
Mostly for the 1/10th and the 1/8th gas cars and ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM SO006 - ORANGE
Overall length | 35.5mm |
Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm SO006 - Orange, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM - BLACK
Overall length | 35.5mm |
Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm - Black, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM - BLUE
Overall length | 35.5mm |
Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm - Blue, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...