HobbyKing
ORANGERX OPEN LRS 433MHZ 9CH RECEIVER
| Frequency | 433MHz |
| Voltage input | 3.7~15VDC |
| Dimensions | 52x29x15mm |
Features:, • 3.3v FTDI support for Arduino, Specs:, IC:Atmega328P, Weight:, 10.5g (w/out antenna), Includes:, OrangeRx Open LRS Rx, *Note:, The setup and use of Open LRS requires computer programming skills and basic Arduino experience. This is not a "plug and play" system. See the attached document under the "Files" tab for resources on programming info, firmware downloads and more.,
The all new OrangeRX Open LRS Rx is an open ...5 Reviews
HobbyKing
ORANGERX T-SIX 2.4GHZ DSM2 6CH PROGRAMMABLE TRANSMITTER W/10 MODEL MEMORY (MODE 1)
| Frequency | 2.4GHz |
| Modulation | DSM2 |
| Stick Mode | Mode 1 |
Features:, • Compatible with all DSM2 Receivers, Specs:, No. of Channels:6, Model Memory:10, Includes:, OrangeRx T-SIX 2.4GHz DSM2 6CH Programmable Transmitter (Mode 1 version), Requires:, 2.4GHz DSM2 compatible receiver, NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,
Have you been waiting for a fully programmable OrangeRx DSM2 ...5 Reviews
HobbyKing
TURNIGY 9XR TRANSMITTER MODE 1 (NO MODULE)
| Online support and user forums available at | www.turnigy9xr.com |
| Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD (Backlit) |
| Support Type | Heli/Acro/Glid |
| Stick modes | 1, 2, 3, 4 |
| Encoder type | ppm/pcm |
| Module Interface | JR Compatible |
| Simulator Interface | Yes (JR & Futaba) |
| Buzzer | Yes |
| Battery Compartment | 112 x 44 x 27mm |
| Weight (less battery & Rf Module) | 723g |
| Required | Battery 3S Lipo |
9XR Standard Features:, • 8 Channel PPM/9 Channel PCM, Spec:, Model Memory:16, Included:, Turnigy 9XR Transmitter (Mode 1 – Throttle on Right Stick), Note:, This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.,
The greatly anticipated Turnigy 9XR has arrived! The software for ...5 Reviews
HobbyKing
JR XG11 11-CHANNEL 2.4GHZ DMSS TRANSMITTER W/RG1131B RECEIVER (MODE 1)
| Modulation | DMSS |
| Band | 2.4GHz |
| Transmitter Battery | 6.4V 1400mAh Li-Fe |
| Model | RG1131B |
| Type | Full range receiver |
| Modulation | DMSS |
| Band | 2.4GHz |
| Dimensions | 48.5x32x14.5mm |
| Weight | 18.5g |
| Voltage Range | 4.5V~8.5V |
| Antenna Length | 150mm |
Standard XG11 System includes:, • RG1131B 11-Channel DMSS 2.4GHz receiver, Key Features:, • Titanium black plating offers a robust, durable finish, Transmitter Specs:, Channels:11, Receiver:, RG1131B 11-channel full-range receiver, Programming Features:, Airplane, sailplane, helicopter, Model Memory:30, Mode:, Mode 1, 2, 3, 4 selectable - (mode 1 default), Receiver Specs:, Channels:11,
When JR started designing the XG11, the aim was to ...HobbyKing
RMILEC RD4047P 10CH UHF RECEIVER (SUITS TS4047 TX MODULE)
| Frequency Range | 400MHz to 470MHz |
| F/S turn on condition | >0.99EBR |
| Antenna gain | 2.15DBM |
| Refresh rate | 40Hz |
| Hopping rate | 40Hz |
| Hopping cycle | 13Hz |
| Recover time | 77mS |
| Refresh rate | 66Hz |
| Hopping rate | 66Hz |
| Hopping cycle | 22Hz |
| Recover time | 45mS |
| Response Time | 4mS to 25mS |
| PWM Output range | 0.5mS-2.5mS |
| Recommend Supply Voltage | 3.5V to 8.4V |
| Damage voltage | >15V |
| Reverse breakdown voltage | >-15V |
| Output ports withstand voltage | >12V |
| Normal Current | <60mA |
| Operating Temperature | –40 to +80 °C |
| Low frequency Power supply noise filter | Include |
| High frequency noise filter | Include |
RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC RD4047P 10CH UHF receiver offers the ultimate in ...HobbyKing
TURNIGY XR6000 6CH 2.4GHZ RECEIVER FOR TURNIGY 4X/6X TX
| Model | XR6000 |
| Spread Spectrum Mode | FHSS |
| Modulation | PCM |
| Weight | 10.5g |
| Dimensions | 40x29x16mm |
Specs:, Channels:6, Frequency:, 2.4GHz ISM Frequency Range, DC:4.5~5.5V, <30mA,
Turnigy XR6000 6CH 2.4GHz Receiver for Turnigy 4X/6X transmitter.HobbyKing
TURNIGY 6XS FHSS 2.4GHZ COMPUTER TRANSMITTER W/6 MODEL MEMORY INC 7 CH RECIEVER (MODE 1)
| Basic Programme Functions | Dual Rates |
| Modulation | GFSK |
| Spread Spectrum Mode | FHSS |
| Output Power | <=20dbm |
| Working Current | <=100mA |
| Working Voltage | 1.2v x 4 (AA/Nimh) |
| Power | 4.5v ~ 9.6v/<30ma |
| Net Weight | 11.5g |
| Dimensions | 41mm x 28mm x 14mm |
Features:, Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches, Turnigy 6XS Transmitter Specs:, Frequency:, 2.4ghz ISM Frequency Range, Number of Frequency Channels:20, Dimensions:, 200mm x 185mm x 105mm, Turnigy XR700 Reciever Specs:, Channel:, 7 (inc RX Battery Input), Frequency:, 2.4g ISM Frequency Range, Requires:, 4 x AA Type Battery For Operation,
The Turnigy 6XS is a great entry level 6 Channel ...5 Reviews
HobbyWireless
FLD-02 TELEMETRY DISPLAY SCREEN
| Specifications | # Model |
| # Compatibility | FrSky DFT, DJT and DHT |
| # Dimension | 55*40*12mm |
| # Pixel | 128*64 |
Details:, The FLD-02 displays in real time all the data remotely transmitter from your RC model via FrSky a duplex receiver., Features:, # Show all connected sensors data;, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors.,
Very powerful tool to let you know what's going on ...RCPlanet
AIRTRONICS RX451R M11X SSR FHSS-3 2.4GHZ RECEIVER (FOR SSR SX) AIR92451
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .019lbs (0.30oz), Dimensions:, 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., Do NOT use Analog servos with this receiver. Use ONLY digital servos. If you use analog servos, the servos and/or receiver could be damaged. In addition, some older ESCs may not support the extremely high frame rate of this receiver., ,
The Airtronics 92451 4-Channel 2.4GHz FHSS-3 Super Response Surface Receiver ...HobbyKing
HOBBY KING 2.4GHZ RECEIVER 6CH V1
| Weight | 13g |
5 Reviews
HobbyKing
CORONA 2.4GHZ DIY MODULE & RX (DSSS)
| Size | 38.5*21.8*6.5mm |
| Voltage | 8V - 13V |
| Range | more than 1500m |
| Operating current | 100 MA |
| Resolution | 10bit |
| Latency | 22ms |
Weight: 5g,
Corona 2.4Ghz DIY Module & RX (DSSS) Upgrade your FM/PPM ...5 Reviews
HobbyKing
FRSKY V8R7-II 2.4GHZ 7CH RECEIVER
| Operating voltage | 3.0~16V |
| Power consumption | 30mA |
| Resolution | 3072 |
| Latency | 22ms |
| Range | 1.5km-2.5km |
| Dimensions | 33.5 x 22 x 12 mm |
| Weight | 5.5g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 7,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
CORONA SYNTHESIZED DUAL-CONV RECEIVER 9CH 72MHZ
| Size | 36x18.7x8.2mm |
| Weight | 9.2g |
| Distance | >1.5Km |
| Sensitivity | +/-8kHz at 65dBdown |
| Channels | 1-9 |
| Filtering | DSP |
5 Reviews
HobbyKing
FUTABA 12FGH PCM G3 2048 W/R6014HS 2.4GHZ RECEIVER (MODE 1)
,
Taking twelve-channel control to the next level! When you improve ...5 Reviews
HobbyKing
FUTABA R6014HS 14-CHANNEL 2.4GHZ FASST RECEIVER
| Receiver Frequency | 2.4GHz bands |
| High Speed Mode | 1-6 channels support high speed digital servos (possible to mix with normal servos) |
| Length | 2.06" (52.3mm) |
| Height | 0.63" (16.0mm) |
| Width | 1.48" (37.5mm) |
| Weight | 0.72oz (20.8g) |
| Current Drain | 700mAh |
| Power Requirement | 4.8 - 6V NiCd battery or regulated output from ESC |
Specifications:, Channels: 14,
Futaba R6014HS 14-Channel 2.4GHz FASST Receiver R6014HS is a new ...5 Reviews