SDSHobby
MINI ALEXMOS 2-AXIS BRUSHLESS GIMBAL/CAMERA MOUNT CONTROLLER BGC V3.5 DRV8313 MOTOR DRIVER
| - Driving current | 1.75A max |
| - Mini size | 38mm*25mm*1.5mm |
Features:-,
Mini size 2 axis brushless gimbal controller BGC V3.5 , ...SDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (CARBON FIBER TRIPOD) +MOTOR +ESC +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity>20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Carbon Fiber Tripod) Controller*1pcsSDSHobby
DUAL-AXLE SHOCK ABSORPTION FPV CAMERA GIMBAL WITH THREE SERVOS
Features:, Material:, fiberglass, Net Weight:, 190g (including 3 servos), Kindly Remark:,
Suitable for camera within 105mm width and 60mm height Applicable ...SDSHobby
3K CARBON FIBER SHOCK ABSORBING PLATE A24 WITH 24 DAMPING BALLS (SUIT FOR SLR & 5-8KG GIMBAL)
| Dimension | 145*145*20mm |
| Material | carbon fiber |
| Plate Thickness | 2mm |
| Damping Ball Qty. | 24 balls (loading weight |
| Suitable Camera | SLR & 5-8kg Gimbal |
| Net Weight | 115g |
| 1.8AV Balls (400g) | 160 kHz (85% elimination), 120 kHz (90% elimination), 80 kHz (80% elimination) |
| .8AV Balls (800g) | 160 kHz (92% elimination), 120 kHz (92% elimination), 80 kHz (90% elimination) |
| 3.8AV Balls (1200g) | 160 kHz (97% elimination), 120 kHz (95% elimination), 80 kHz (93% elimination) |
| Note | 160 kHz--main vibration frequency for FPV Helicopter |
Features:, Hooked between Multicopter and Gimbal, eliminates the vibration and improves the video/ photo quality, Specifications:, Package Lists:, 1 x carbon fiber Shock Absorbing Plate A24 with 24 Damping Balls, Installation Note:, 4 balls is suitable for Gimbal with camera, 8 balls for Gopro, 12 ball for small card type camera and 16 balls or more enough for Gimbal with micro SLR., Frequency Vibration Elimination for Reference:,
NOT Pre-assembled 120 kHz--main vibration frequency for small quadcopter 80 ...SDSHobby
HUMMINGBIRD HM650 FOLDABLE CARBON FIBER QUADCOPTER/ FOUR-AXLE RACK/ FRAME (SUPERIOR TO TAROT 650)
| Rotor Spacing | 650mm |
| Weight of Rack | 503.5g |
| Brushless Motor | 300-400W |
| Brushless ESC | 30A or above |
| Battery | 4S 5000-10000mAh |
| Propeller | 12-14in |
Technical Parameters:, Recommended Equipments (need to buy separately):, Features:, 1. Using carbon fiber tube arm, very light and strong.,
. Designed with horizontal foldable structure for saving space. 3. ...SDSHobby
ENHANCED ARM FOR S500/S550 QUADCOPTER/FOUR-AXIS AIRCRAFT RACK/FRAME WITH BLUE & WHITE COLOR 1PCS
Features:,
arm for S500/S550 four-axis aircraft frame; There are two colors ...SDSHobby
HML650 RETRACTABLE LANDING GEAR FOR HMF S550 TAROT 650/680PRO FRAME/QUADCOPTER/ HEXACOPTER/MULTICOPTER PHOTOGRAPHY
| Power support | 6s battery |
Features:, Recommended Quadcopter and Hexacopter frame:, wheelbase is between 450mm-700mm and flying weight is less than 4KG, Introduction:, The retractable landing gear is designed for the Multicopter Frame in order to provide a better perspective in aerial-filming/photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible. It is essential goods for triaxial aerial-filming gimbal such as Gopro 3 gimbal., Tips:, If the switch channel on the TX has fail-safe function, set the fail-safe value to [Lower] position, so that the landing gear will be in [Lower] status when the receiver enters fail-safe, to land the aircraft safely.,
Very easy to install, just two minutes. The whole weight ...SDSHobby
LOWER CARBON FIBER MOUNTING BOARD OF RACK/FUSELAGE FOR IDEA-FLY IFLY-4S QUADCOPTER/FOUR-AXLE FLYER
Application:, , Features:,
Suitable for IDEA-FLY IFLY-4S quadcopter/four-axle flyer. Special PCD mounting board.SDSHobby
ONE PAIR CARBON FIBER 12*3.8 CLOCKWISE AND COUNTERCLOCKWISE PROPELLERS FOR MULTICOPTER/ MULTI-AXIS AIRCRAFT
Specification:, Size:, 12*3.8, Net Weight:, 15.5g/pcs, Material:, carbon fiber, Surface Treatment:, 3K, Diameter of Prop Gaskets:, 6mm*2pcs, 5mm*2pcs, Package Contents:, Prop Gaskets:, 4pcs,
Clockwise propeller*1pcs Counterclockwise propellers*1pcsSDSHobby
CROSS BAR OF LANDING GEAR FOR IDEA FLY IFLY-4 QUADCOPTER/ FOUR-AXLE FLYER
Brand:, , Specifications:, , Material:, Top quality aluminum alloy, high-precision CNC machine processed, Application:, for IDEA FLY IFLY-4 Quadcopter/,
IDEA FLY Four-Axle FlyerSDSHobby
BRACKET/ FRAME MOUNT FOR ST360 QUADCOPTER/ FOUR-AXIS FLYER WITH 4PCS 8045 PROPELLERS
| 11.1V 3S 1800mah~3300mah 20C (Flying time | more than 10min ) |
| KK Control Board (such as | CB-KK |
| MWC Control Board (such as | CB-MWC |
Performance:, Wheelbase:, 360mm, Total Height:, 90mm, Weight (without prop):, 170g, Box Size (L*W*H):, 65mm * 220mm * 50 mm, Weight of ST360-KIT:, , Package Contents:, Recommended Equipments:, Battery:, ESC:, ST20A * 4pcs, Motor:, ST2210 * 4pcs, Radio Control:, , Control Board:,
395g (360 frame + 8045 Prop*4pcs) Aluminum alloy mounting board ...SDSHobby
FIBERGLASS SHOCK ABSORBING PLATE A24 WITH 24 DAMPING BALLS (SUIT FOR SLR & 5-8KG GIMBAL)
| Dimension | 145*145*20mm |
| Material | fiberglass |
| Plate Thickness | 2mm |
| Damping Ball Qty. | 24 balls (loading weight |
| Suitable Camera | SLR & 5-8kg Gimbal |
| Net Weight | 142g |
| 1.8AV Balls (400g) | 160 kHz (85% elimination), 120 kHz (90% elimination), 80 kHz (80% elimination) |
| .8AV Balls (800g) | 160 kHz (92% elimination), 120 kHz (92% elimination), 80 kHz (90% elimination) |
| 3.8AV Balls (1200g) | 160 kHz (97% elimination), 120 kHz (95% elimination), 80 kHz (93% elimination) |
| Note | 160 kHz--main vibration frequency for FPV Helicopter |
Features:, Hooked between Multicopter and Gimbal, eliminates the vibration and improves the video/ photo quality, Specifications:, Package Lists:, 1 x Fiberglass Shock Absorbing Plate A24 with 24 Damping Balls, Installation Note:, 4 balls is suitable for Gimbal with camera, 8 balls for Gopro, 12 ball for small card type camera and 16 balls or more enough for Gimbal with micro SLR., Frequency Vibration Elimination for Reference:,
NOT Pre-assembled 120 kHz--main vibration frequency for small quadcopter 80 ...SDSHobby
UNIVERSAL-TYPE PROPELLER GASKET/ CLIP FOR T-MOTOR/ HL/ SUNNYSKY DISK MOTOR
Product Description:, Universal-type Propeller Gasket/ Clip for T-motor/ HL/ Sunnysky Disk Motor, compatible for 4822/4014/4108/4112/4116 etc.,
The gasket is suitable for multi-rotor disk motor to install ...SDSHobby
PIXHAWK PIX PXI PX4 OPEN-HARDWARE AUTOPILOT FLIGHT CONTROLLER SET (AUTOPILOTS FC/ CONTROL BOARD WITH 6H GPS) FOR RC AIRPLANE/ MULTICOPTER
| . CPU | 168MHZ, 256K RAM |
Kindly Remark:, 1. The product is, :, Their positioning accuracy, speed and sensitivity are the same. The only difference is that, Weight and Sizes:, 1. Weight:, 38g (not include GPS), . Width:, 50mm, 3. Height:, 15.5mm, 4. Length:, 81.5mm, Features:, 1. Advanced, Hardware Specifications:, Processor:, 1. 32-bit 2 Mega STM32F427 Cortex M4 core with FPU, Interfaces:, 1. 5 x UART (serial ports), one high-power capable, 2x with HW flow control, Attention:, Pixhawk is a PPM-input autopilot, which means that it gets RC input from a single cable to the receiver, either via the PPM port, the Futaba S.BUS port, or the special satellite receiver port for Spektrum gear. Most modern RC receivers (and all those sold by 3D Robotics) allow for PPM output, but some, such as non-S.BUS Futaba receivers, do not.,
open-hardware and not support sales return after selling out. If ...SDSHobby
CARBON FIBER RETRACTABLE ELECTRIC LANDING GEAR WITH D16 PIPE CLIP FOR MULTICOPTER/FPV *2PCS/SET
| Suitable voltage | 4.6-7.2V |
| Material | glassy carbon board, carbon fiber pipe |
| Weight | 190g |
Features:, Specifications:,
Simple and lightweight structure, and there is less failure rate ...