SDSHobby
ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER ARF WITH FRAME (PLASTIC TRIPOD) +MOTOR +ESC +CONTROLLER +PLASTIC PROP
| Empty Frame Weight | 900g |
| Flying Weight | 1200g |
| Payload Capability | 200-500g |
| Maximum Gross Take-Off Weight | 1700g |
| Flight Time | Over 10min |
| Wheelbase | 550mm |
| Height | 306mm |
| Length of After Fold | 784mm |
| Height of After Fold | 100mm |
| Carton Size (L*W*H) | 415mm *230mm* 80mm |
| Plastic Prop | 10*3.8(2pcs), 10*3.8P(2pcs) |
| Motor | 2812 brushless motor, KV910, 4pcs |
| High Speed Brushless ESC | 20A, 4pcs |
| Radio Control System | transmitter 6 channels or more, receiver 6 channels or more |
| Battery | 11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity >20C) |
Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,
Bumblebee Frame*1pcs(Plastic Tripod) Controller*1pcsSDSHobby
DJI NAZA CONTROL BOARD FOR RC MULTICOPTER SUPPORTING D-BUS
| Two Control Modes | manual mode, pose mode |
| Voltage Protection | LED lights flashily warning for the first level, automatically landing off for the second level |
Description:, NAZA Control Board is a super light control platform, especially designed for model players, coming with innovative All-in-One design concept, integrating controller, gyro, accelerometer, barometer and sensor with a control module. It supports D-Bus, online upgrading, function and hardware expanded., Basic Functions:, Expanded Functions:, Functions: lose-control protection, stably return for radio control, automatically landing off when overtime flying, Package Contents:,
Stable flight performance and highly location for RC Multicopter Suitable ...SDSHobby
F600 QUADCOPTER/ FOUR ROTOR RACK / FOUR ROTOR HELICOPTER RACK / X4-FLYER RACK
| Motor Shaft | 600mm |
| Rack Weight | 330g |
| Motor | 2212, KV |
| Propeller | 10*4.5in |
| Controlling Board | KK firmware from Korea |
| ESC | Hobbywing Brushless ESC 20A or 40A |
| Battery | 2200mAh, 20C, 11.1V Li-Po |
Specifications:, Features:,
Recommended Equipments (need to buy separately) 1000 Shatter-resistant and bend-resistant ...SDSHobby
CAMERA GIMBAL FOR BOSCAM HD19 FPV MINI CAMERA WITH SERVOS
Specifications:, Net Weight (Camera Gimbal):, 50g (without servos), Servo:, 9g*2pcs (180 degree and 360 degree), Rotating Angle:, 60 degree (Horizontal) and 180 degree (Vertical), Package Contents:, Package Type:, loose packed,
This camera Gimbal is only used for HD19 Camera! 1 ...SDSHobby
2.4G IDEAL FLY APOLLO FPV QUADCOPTER RTF (WITHOUT CAMERA), GPS
| Power Consumption (Flight Control Board) | 3.12W |
| Flight Weight | <1200g |
| Hovering Precision (GPS Mode) | ±0.8m (Vertical), ±2.5m (Horizontal) |
| Max. Speed of Tail Servo Horn | 300 degree/sec |
| MAX. Tilt Angle | 45 Degree |
| Max. Vertical Speed | ±4m/s |
| Max. Flying Speed | 5m/s |
| Axle Base | 350mm |
| Working Temperature | -10 to -50 Celsius Degree |
| Frequency | 2.4GHz ISM |
| Channel for Receiver | 6CH |
| Control Distance | 300 meters (outside or without obstruct) |
| Receiving Sensitivity (1%PER) | >-93dBm |
| Transmitter Power | <20dBm |
| Working Capacity | 52Ma@6V |
| Input Voltage | 100-240V |
| Charging Current | 1A/2A |
| Balance Current | 200Ma |
| Power | 20W |
| http | //bbs.5imx.com/bbs/forum.php?mod=viewthread&tid=778800&extra=&page=1 |
Parameters for Quadcopter:, Parameter for Radio Control:, Parameter for Charger:, Package Lists:, 1*Apollo Quadcopter RTF, Features:, Engineering plastic and titanium alloy filled in the case, Pre-installation position makes the Gimbal conveniently mount on the bottom and also easily adjust the motions: moving up and down, rolling left and right, Flight Video:,
Without battery 1*6CH Transmitter & Receiver 1* Landing Skid (one ...SDSHobby
4PCS/BAG*UNIVERSAL AERIAL PHOTOGRAPHING SHOCK ABSORPTION BALL/ DAMPING BALL (60G/ 100G/ 600G LOADING CAPACITY)-BLACK COLOR
Features:, Eliminate ripple effect of photo/video caused by high frequency vibration of multi-copter., Damping Balls (60g loading capacity):, Application:, suit for Gimbal with Gopro and small type camera, Weight:, 0.6g each, Fixing Diameter:, 5.7mm (suit for 5.7mm diameter fixing hole), Loading Capacity:, 60g each (compression or stretching), Damping Balls (100g loading capacity):, Application:, suit for Gimbal with Gopro and small type camera, Weight:, 0.9g each, Fixing Diameter:, 6.8mm (suit for 6.8mm diameter fixing hole), Loading Capacity:, 100g each (compression or stretching), Damping Balls (600g loading capacity):, Application:, suit for heavy loading Gimbal with single-lens reflex camera, Zenmuse Z15 Gimbal, Weight:, 1.3g each, Fixing Diameter:, 9mm (suit for 6.8mm diameter fixing hole), Loading Capacity:, 600g each (compression or stretching), Package Lists:, Universal Damping Balls *4pcs,
SDSHobby
4PCS/BAG*D8MM-3 SHOCK-RESISTANCE SKID-PROOF SPONGE FOAM TUBE PROTECTORS FOR MULTICOPTER LANDING SKID
Features:, - Mounted on the landing gear to prevent the landing gear from slide down., Sponge Foam Tube Protector D8mm-3 (Red + Black):, Size:, 4 (outer)*8 (inner)* 45mm (length), Weight:, g each, Color:, Red + Black, Package Lists:, Sponge Foam Tube Protector*4pcs,
- To ensure stable structure and avoid scratch for Multicopter ...SDSHobby
ONE PAIR* T-MOTOR 15*5.5/1555 CARBON FIBER POSITIVE PROPELLER AND IN REVERSE PROPELLERS FOR MULTICOPTER
| Recommended Propeller Gasket | MQT05 |
Specifications:, Size:, 15*5.5, Pitch:, 5.5mm, Diameter of main hole:, 4mm, Diameter of side hole:, 3mm, Center distance:, 12mm,
SDSHobby
ONE PAIR* T-MOTOR 14*5.5/1455 CARBON FIBER POSITIVE PROPELLER AND IN REVERSE PROPELLERS FOR MULTICOPTER
| Recommended Propeller Gasket | MQT05 |
Specifications:, Size:, 14*5.5, Pitch:, 5.5mm, Diameter of main hole:, 4mm, Diameter of side hole:, 3mm, Center distance:, 12mm,
SDSHobby
CNC ALUMINIUM ALLOY BRUSHLESS GOPRO CAMERA GIMBAL FOR FPV AERIAL PHOTOGRAPHY/ GOPRO3
| 4. Support Receiver | general receiver, S-BUS receiver, DSM2/ DSMJ/ DSMX receiver. |
| 5. Remote control | PPM/ PCM/ 2.4G |
| 6. Operating Voltage | DC 7.4V~14.8V (recommended 12V, 3-cell lithium battery) |
| 7. Operating Current | 200mA-1000mA (Related to supply voltage and motor power) |
| 8. Operating Temperature | -18°C~70°C |
| 9. Control frequency | 2000Hz |
| 10. Motor driving frequency | 20 KHz (noiseless smooth drive) |
| 12. Controlled angle range | -45~45degree (roll), -60~60degree (pitch) |
| 13. Suitable film device | GOPRO Hero3, GOPRO Hero3+ |
Product Description:, Features:, 1. Support video, 11. Control precision:, 0.1 degree, 17. Whole weight:, 160g, Package Details:, *Attention:, GOPRO3 camera,
GOPRP3 ( free debugging ) gimbal is designed for Gopro ...SDSHobby
10PCS* 22#/ 22AWG HEAVY DUTY FLAT CABLE 15CM 150MM CONNECTING LINE FOR FLIGHT CONTROL/ MALE-MALE SERVO WIRE- JR/ FUTABA COLOR
| Wire size | 22AWG/ 22# |
| Diameter | 0.08mm |
| Wire outer diameter | 1.5mm |
| Wire Length | 15cm |
| Color | JR color and Futaba color |
| Connector | JR male connector* 2pcs |
Product Description:, Core number: 60,
It is suitable for connecting multiaxis.SDSHobby
10PCS* 22#/ 22AWG HEAVY DUTY FLAT CABLE 10CM 100MM CONNECTING LINE FOR FLIGHT CONTROL/ MALE-MALE SERVO WIRE- JR/ FUTABA COLOR
| Wire size | 22AWG/ 22# |
| Diameter | 0.08mm |
| Wire outer diameter | 1.5mm |
| Wire Length | 10cm |
| Color | JR color and Futaba color |
| Connector | JR male connector* 2pcs |
Product Description:, Core number: 60,
It is suitable for connecting multiaxis.SDSHobby
NEW FPV REMZIBI POOR MAN'S OSD + UBLOX GPS MODULE + USB TTL CABLE MODULE
| Supply power requirement | 7V-14V (ie |
| Weight | 16 gram (OSD + dedicated GPS) |
| Main chip | U-BLOX could modify and solidify baud rate |
| Locating function | <2.5m [Autonomous][50%] |
| Speed rate | <0.1m/s; Direction |
| Timing accuracy | 30ns |
| Reference coordinate system | WGS-84 |
| Max. Altitude | 50000m |
| Max. Speed | 500m/s |
| Acceleration | <4g |
| Cold start | 32s in average |
| Warm start | 32s in average |
| Hot start | 1s in average |
| Operation temperature | -40 to +85centigrade |
| Wide voltage range | Main power |
| Location update | 1Hz~5Hz(default 5Hz |
| Data rate | 9600bps~ 115200 bps (default 38400 bps) |
Technical Data of FPV Remzibi Poor Man's OSD:, , Features of FPV Remzibi Poor Man's OSD:, Features of GPS:, Package Included:,
Video voltage measurment range 0-15V Engine (ENG) voltage measurment range ...SDSHobby
HML850 RETRACTABLE LANDING GEAR FOR S800 EVO/ T810/T960 HEXCOPTER OCTOCOPTER FRAME
Product Description:, 1. The retractable landing gear is designed for, . Installation is very simple, just two minutes. The whole weight is about 750g. Recommended hexcopter octocopter frame:, wheelbase is between 800mm-1050mm, flying weight is less than 10KG, Tips:, 1. If the switch channel has,
This product is temporarily out of stock. If you need, ...SDSHobby
X-CAM KONGCOPTER 550 FRAME X-BUG ALIEN QUADCOPTER/ REPTILE QUADCOPTER AQ550 WITH 25MM ARM
Features:, The Drone frame is made of fiber glass with plastic motor mounts- aluminum arms. The motor mount supports, Specifications:, Wheelbase:, 550mm, Weight:, about 700g, Propeller size:, 12 inches, Recommended Configuration (Not included):, Motor:, TM2216 KV900, Propeller size:, 8-12 inches (such as, Battery:, 4S 5000mAh, Gimbal:, X-CAM X100B+ with GOPRO3 (280g), Flight time:, 12 Minutes, Total weight:, kg with all electronic equipment and battery,
-35mm diameter motors - one arm can be assembled 2 ...