ngHobbies
BLACK ALU RIGGER FOR MK HEXA
,
This is the black aluminum rigger only, for the Mikrokopter ...ngHobbies
BL-CTRL V2.0 SPEED CONTROLLER
| •PCB | 4-layers (increased current-measuring shunt) |
| •Drill | 3mm |
| •Dimension (W x H) | approx 44mm x 21mm |
This new version has the following features:, •Integrated current measurementfor measuring the actual current and the used capacity, The following items are included in this kit:,
The BL-Ctrl V2.0 is the newly released speed controller for ...ngHobbies
MK LED DRIVER
| http | //vimeo.com/22063018 |
The Distribution boards for Mikrokopter Quads and Mikrokopter Okto does not have built in LED control as the distribution board for Hexa and Hexa XL. This little circuit was designed to be soldered on top of the distribution board along the BL controller number 3. With it's low profile and very small footprint it is almost invisible - but it gies an extra feature to your Mikrokopter - the possibility to control the LED's underneath from switches of the remote control - or based on fucntions being activated. One could achieve the following setup:, Free flight - no LED's on, The package contains:, 1 x MK LED Driver Board, Documentation:, Setup and installation guide:, Click here to download or open, :,
GPS position hold - LED's slowly flashing Coming home - ...ngHobbies
RED ALU RIGGER FOR 500MM MK FRAME
,
This is the red aluminum rigger only, for the 500mm ...ngHobbies
EPP1345 CF PROPELLER PAIR
| - External diameter | 13" |
| - Pitch | 4.5" |
| - Mounting hole | 5mm |
Technical Data:, Package contains:, One pair of counter rotating propellers (one of each direction - total 2),
This is a pair of the new sturdy 13" left ...ngHobbies
RED ALU RIGGER FOR MK HEXA
,
This is the Red aluminum rigger only, for the Mikrokopter ...ngHobbies
MKGPS 5CM CABLE ONLY
,
This package contains a replacement cable for the MKGPS. Please ...ngHobbies
MIKROKOPTER BASIKSET HEXA XL
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-HexaXL |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
SONY LANC-CTRL (CAMERA REMOTE CONTROL)
| Weight | approx.50g incl. cables |
| Dimension | approx.30x20mm |
| Cable length | Red-LED-Cable approx.30cm |
| Cable length | SONY AV-Cable approx.30cm |
| Cable length | Sevo cable approx.30cm |
The following functions can be used:, Zoom-in & out (variable speeds - from very slow to very fast), Technical Data:,
The LANC-Ctrl is a control board to control cameras or ...ngHobbies
GRAUPNER RECEIVER GR-32 HOTT
| Weight | ca. 24 g |
| Dimensions | ca. 63 x 30 x 14 mm |
| Voltage | 3,6V - 8,4V |
Technical Data:, Multisignal- / Summensignal - Output,
This is a brand new GR-32 16-channel 2,4 GHz RASST ...ngHobbies
DUPLEX TU2 2.4GHZ
| Dimensions | 55 x 28.8 x 9mm |
| Weight | 15g |
| Operating temperature min. | -10° C |
| Operating temperature max. | +85° C |
| Supply min. | 3.5 V |
| Supply max. | 16V |
| Current | 38mA |
| Output Power | 20dBm |
| Antenna | 2dBi |
Compatible systems are for example:, Graupner/JR:, X-347, X-388, X-9303, MX-22, X-3810 ADT, PCM-10S, PCM-10X, FM-6014, MC-17, MC-18, MC-20, MC-24, MC-10, MC-14, MC-15, MC-22, MC-16-20, MX-12, MX-16, MX-16s,MC-12,MX-16s,MC-19, Futaba:, 7U, 8U, 8J, 9C,9Z, FN, T10C, 3PK, 3PJ, FC-18, FC-28, FC-18 JUNIOR, T6EXHP, 12FG, 12Z, 14MZ, FX-14,FC-16,FX-18, Hitec:, Optic 6, Eclipse 7, Prism 7, Laser 4, Laser 6, Optic 6 sport, Multiplex:, Evo 7,9,12 Serie, Cockpit SX, Profi 3000, Profi 4000, Cockpit MM, max. number of input PPM channels: 16, Package content:, 1 Duplex TU2 RF module,
This module is used universally for nearly all remote controls. ...ngHobbies
0.5 MM PELICAN KOPTERTOP
More information:, www.koptertops.com,
This third party plastic cover is formed from 0.02" (0.5mm) ...ngHobbies
APC SLOW FLYER 10X4.7 PROPELLER
| - External diameter | 10" |
| - Pitch | 4.7" |
| - Mounting hole | 5mm |
Technical Data:, Package contains:, One propeller, manual and rings.,
This is a 10 x 4.7 slow flyer propeller that ...ngHobbies
EPP1245 CF PROPELLER PAIR
| - External diameter | 12" |
| - Pitch | 4.5" |
| - Mounting hole | 5mm |
Technical Data:, Package contains:, One pair of counter rotating propellers (one of each direction - total 2),
This is a pair of left and right propellers from ...