Skip to content

HiModel

12MM PLASTIC MOTOR MOUNT FOR MULTI-ROTOR AIRCRAFT TYPE B 123-004

Motor mount arm Diameter12 mm.
Mounting bracket diameter35mm (approx.)

, , , , , , Specifications:, , , , , , , , , , , Type B, , ,

Includes/Requires: Include:1 x motor mount

HiModel

HL W48-22 390KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR QUADCOPTER/MULTI-ROTOR AIRCRAFT

ModelW48-22 390KV
Weight99.5g
Applicationspecially designed for quadcopter and multi-rotor aircrafts.

, , , , , , Specifications:, , , , , , , , , , , Model, , W48-22 kv690, , W48-22 kv570, , W48-22 kv490, , W48-22 kv390, , Diameter of the stator, , 40.6mm, , Length of stator, , 7.5mm, , No load Current(A/7.4V), , 0.95, , 0.65, , 0.45, , 0.35, , Weight, , 98g, , Lithium Battery, , 3-4S, , 3-4S, , 4-6S, , 6s, , Max Surge Current, , 25A, , 21A, , 16A, , 13A, , Running Current, , <19A, , <16A, , <11A, , <9A, , ,

Features: - HL disk type motors specially designed for multi-rotor ...

HiModel

DUALSKY XM5010TE-5 700KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR MULTI-ROTOR

ModelXM5010TE-5
Weight126g
Diameter50mm
Length31.7mm
Diameter of Shaft6mm
Mounting holes pitch19/25mm
Slots,Poles24, 28
Idle Current(Io) @10V1.9A
Resistance(Ri)32mOhm
Cruising power[8 mins]280.95W
Bursts current[15s]46.02A
Peak power[15s]510.81W
Recommended ESCXC4018BA
Setup 1 (No. of Cell, Prop.)3S, 16x5
Setup 2 (No. of Cell, Prop.)4S, 14x5
Max. weight of 4-rotor copter2.81kg
Max. weight of 3D models0.94kg
Memo3KG 4-rotor copters, 15 - 25E airplanes

, , , , , , Specifications:, , , , , , , , , , , KV: 700RPM/V, *HINT: THE KV PRINTED ON THE PACKING OR MOTOR ARE THEORETICAL/CALCULATED KV, THE KV NUMBER ON THE BELOW SPEC SHEET IS REAL TEST KV, SO THE KV IN THE BELOW TABLE WILL TAKE PRIORITY, AND IT IS NORMAL THAT IF THE KV ON THE PACKING OR MOTOR IS DIFFERENT TO THAT LISTED ON THE BELOW TABLE., , ,

Features: 28 poles. High torque. High efficiency. Specifically designed for ...

HiModel

DUALSKY XM5015TE-4 570KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR MULTI-ROTOR

ModelXM5015TE-4
Weight160g
Diameter50mm
Length36.5mm
Diameter of Shaft6mm
Mounting holes pitch19/25mm
Slots,Poles24, 28
Idle Current(Io) @10V1.7A
Resistance(Ri)27.4mOhm
Cruising power[8 mins]421.21W
Bursts current[15s]51.75A
Peak power[15s]765.84W
Recommended ESCXC6018BA
Setup 1 (No. of Cell, Prop.)4S, up to 16x5
Setup 2 (No. of Cell, Prop.)5S, 14x7
Max. weight of 4-rotor copter4.21kg
Max. weight of 3D models1.40kg
Memo4KG 4-rotor copters, 30E 3D airplanes

, , , , , , Specifications:, , , , , , , , , , , KV: 570RPM/V, *HINT: THE KV PRINTED ON THE PACKING OR MOTOR ARE THEORETICAL/CALCULATED KV, THE KV NUMBER ON THE BELOW SPEC SHEET IS REAL TEST KV, SO THE KV IN THE BELOW TABLE WILL TAKE PRIORITY, AND IT IS NORMAL THAT IF THE KV ON THE PACKING OR MOTOR IS DIFFERENT TO THAT LISTED ON THE BELOW TABLE., , ,

Features: 28 poles. High torque. High efficiency. Specifically designed for ...

HiModel

SUNNYSKY V3508 700KV OUTRUNNER BRUSHLESS MOTOR FOR MULTI-ROTOR AIRCRAFT

ModelV3508-700KV
KV (rpm/v)700
Weight107g
Wire length60cm
Prop adaptor output shaft diameter6mm
Applicationspecially designed for quadcopter and multi-rotor aircrafts.

, , , , , , Specifications:, , , , , , , , , , , Type, , Prop size, (inch), , Voltage(V), , Throttle, , Current, (A), , Pull(g), , RPM, (RPM/Min), , Power(W), , g/w ratio, , Temperature under 100% throttle for 10 minutes(℃), , V3508KV700, , APC10x3.8, , 11.1, , 50%, , 1.6, , 260, , 3885, , 17.76, , 14.63963964, , 40, , 65%, , 3.2, , 420, , 4774, , 35.52, , 11.82432432, , 75%, , 5.4, , 570, , 5585, , 59.94, , 9.50950951, , 85%, , 7, , 680, , 5965, , 77.7, , 8.751608752, , 100%, , 9.3, , 810, , 6454, , 103.23, , 7.846556234, , APC11x4.7, , 50%, , 2.6, , 380, , 3840, , 28.86, , 13.16701317, , 42, , 65%, , 4.2, , 480, , 4431, , 46.62, , 10.2960103, , 75%, , 7, , 680, , 5151, , 77.7, , 8.751608752, , 85%, , 9.6, , 830, , 5631, , 106.56, , 7.789039039, , 100%, , 12, , 960, , 6010, , 133.2, , 7.207207207, , APC12x3.8, , 50%, , 2.8, , 470, , 3574, , 31.08, , 15.12226512, , 48, , 65%, , 5.2, , 620, , 4255, , 57.72, , 10.74151074, , 75%, , 8.2, , 800, , 4785, , 91.02, , 8.789277082, , 85%, , 11.1, , 970, , 5142, , 123.21, , 7.872737602, , 100%, , 14.9, , 1160, , 5545, , 165.39, , 7.013725135, , APC13x4, , 50%, , 2, , 320, , 3711, , 22.2, , 14.41441441, , 46, , 65%, , 3.8, , 490, , 4542, , 42.18, , 11.61688004, , 75%, , 6.3, , 700, , 5348, , 69.93, , 10.01001001, , 85%, , 8.3, , 850, , 5845, , 92.13, , 9.226093563, , 100%, , 10.5, , 970, , 6291, , 116.55, , 8.322608323, , APC10x3.8, , 14.8, , 50%, , 3, , 460, , 5065, , 44.4, , 10.36036036, , 43, , 65%, , 4.6, , 600, , 5742, , 68.08, , 8.813160987, , 75%, , 8.7, , 910, , 6870, , 128.76, , 7.06741224, , 85%, , 11.2, , 1050, , 7305, , 165.76, , 6.334459459, , 100%, , 14.7, , 1240, , 7910, , 217.56, , 5.699577128, , APC11x4.7, , 50%, , 4.2, , 580, , 4808, , 62.16, , 9.330759331, , 54, , 65%, , 7, , 820, , 5570, , 103.6, , 7.915057915, , 75%, , 11.1, , 1090, , 6377, , 164.28, , 6.635013392, , 85%, , 14.5, , 1270, , 6848, , 214.6, , 5.917986952, , 100%, , 18.1, , 1450, , 7311, , 267.88, , 5.412871435, , APC12x3.8, , 50%, , 4.1, , 630, , 4234, , 60.68, , 10.38233355, , 78, , 65%, , 8.1, , 940, , 5074, , 119.88, , 7.841174508, , 75%, , 12.8, , 1200, , 5700, , 189.44, , 6.334459459, , 85%, , 18.4, , 1480, , 6190, , 272.32, , 5.434782609, , 100%, , 22.5, , 1680, , 6475, , 333, , 5.045045045, , APC13x4, , 50%, , 3.2, , 510, , 4650, , 47.36, , 10.76858108, , 51, , 65%, , 5.9, , 810, , 5725, , 87.32, , 9.276225378, , 7,

Includes/Requires: Includes:1 x motor 1 x prop adaptor 6 x ...

HiModel

10X3.8P COUNTER-CLOCKWISE (CCW) PROPELLERS (2PCS) FOR BUMBLE BEE ST-550-029

, , , , , , Specifications:, , , , , , , , , , , 10x3.8P Counter-clockwise (CCW) Propellers (2pcs) for BUMBLE BEE ST-550-029, *As the prop hub hole is not round, this prop may not be used for other multi-copters except BUMBLE BEE., , ,

Includes/Requires: Includes:2 x CCW propellers

HiModel

BALL BEARING SET FOR DUALSKY 5010-5015 MOTORS

Manufacturer codeBB50TE

, , , , , , Specifications:, , , , , , , , , , , Ball Bearing Set for Dualsky 5010-5015 Motors, , ,

Includes/Requires: Includes:2 x ball bearings

HiModel

FOLDABLE GPS MODULE MOUNTING BASE SUIT FOR DJI GPS ETC.

MaterialCNC 7075T6 Aluminum alloy.
Inner diameter4mm (for 4mm antenna mounting rod)

Specifications:, Foldable GPS Module Mounting Base suit for DJI GPS etc., Weight: 4g, * 4mm mounting rod is not included., ,

Features: Applications Many multi-rotor hobbyists may experiencing this problem, even ...

HiModel

3-BLADE 10 X 45 PROPELLER SET (ONE CW, ONE CCW) - BLACK

, , , , , , Specifications:, , , , , , , , , , , 3-blade 10 x 4.5 Propeller Set (one CW, one CCW) Black, (one clockwise rotating, one counter-clockwise rotating), * The photo is for reference only., , ,

Includes/Requires: Includes: 1 x clockwise rotating propeller 1 x counter-clockwise ...

HiModel

ZERO TECH YS-X4 MULTI-ROTOR FLIGHT CONTROLLER - BLUETOOTH VERSION

, , , , , , Specifications:, , , , , , , , , , , , ZERO TECH YS-X4 Multi-rotor Flight Controller - Bluetooth Version, , ,

Features: YS-X4 Autopilot system for multi-rotor is specially designed for ...

HiModel

LOTUSRC T580P QUADCOPTER ARTF (HALF ASSEMBLED)

, , , , , , Specifications:, , , , , , , , , , , No., , Name, , Specification, , Quantity, , Unit, , 1, , Cover, , ABS composite material, , 1, , Set, , 2, , Arm beam, , Carbon fiber/glass fiber, , 4, , Pcs, , 3, , Landing gear, , Glass fiber/rubber/high-strength aluminum, , 1, , Set, , 4, , Motors, , C2806 KV600, Out runner brushless motor, , 4, , Pcs, , 5, , Propeller, , 1260、1260R, Plastic composite, , 4, , Pcs, , 6, , Camera mount, , Carbon fiber/carbon fiber planar balance, , 1, , set, , 7, , PTZ hanging bracket, , Flexible damper, , 1, , Set, , 8, , PTZ steering engine, , Metal high-speed digital steering engine, , 2, , Pcs, , 9, , Brushless motor, , 2-3S 18A high-speed ESC, , 4, , Pair, , 10, , FC system, , Inertial attitude self-stable system, , 1, , set, , , , , , , , , , , Technical parameters, Aircraft dimension, , 608 × 608 × 243, , Mm, , Maximum expandable size, , 885 × 885 × 243, , Mm, , Motor to motor, , Diagonal distance between two motor centers, , 580mm, , Propeller, , 1260frontal and versa props, , 12inch, , Battery, , LiPo 3S 2200mAh 20C, , Standard 1p, , Aircraft weight(kit only), , Without battery, receiver, applicable payload, , 730gram, , Take-off weight, , 3S 2200mAh 1P battery, receiver, camera mount, , 950gram, , Recommended payload, , Card-type camera, , ≤230gram, , Maximum pull, , 1P standard battery, , 2400gram, , maximum payload, , 1P standard battery, , ≤580gram, , Maximum take-off weight, , 1P standard battery, , 1800gram, , Flight distance, , Visual area, , -, , Flight time, , 3S 2200mAh 1P battery, receiver, , 12mins, , Wind resistance, , ≤4, , Class, , , ,

Features: 1. Function and features T580p quad-copter is a mid-level ...

HiModel

SIX600 FIBERGLASS & ALUMINUM 6-AXIAL DIY FRAME - HIGH LANDING SKID

Motor spacing(distance between motor axles)600mm
Weight350g
brushless motor2212
KV rangebelow 1000
Propeller size10 x 45

, , , , , , Specifications:, , , , , , , , , , , SIX600 Fiberglass & Aluminum 6-axial DIY Frame - High Landing Skid, Suggested setting (not included):, , ,

Read more

1 Reviews

HiModel

REPTILE500 4-AXIAL/XCOPTER DIY FRAME - STANDARD EDITION

Motor spacing(distance between motor axles, cross side)500mm
Weight346g
Mode4-axial, X mode
Materialengineering plastics
Motor mounting seat spacing16cm/ 19cm
brushless motorHL 3525 series or HiModel 2212-2217 series or AX 2810Q.
KV range3S Lipo 800-1100KV; 4S Lipo 600-700KV
Suitable cameraGopro HD19 camera etc
Propeller size10-11inch 2-blade; 8-9 inch 3-blade

, , , , , , Specifications:, , , , , , , , , , , REPTILE500 4-axial/Xcopter DIY Frame - Standard Edition, Landing skid type: No, Suggested setting (not included):, * Not assembled, camera mount/tilt sold separately., , ,

Includes/Requires: Includes:2 x central boards 4 x arms 1 x ...

Read more

1 Reviews

HiModel

UNIVERSAL TWO-AXLE STABILITY AUGMENTATION AERIAL TILT FOR CAMERA UP TO 1KG V2

TypeUniverdal Two-axle Aerial Pan & Tilt for Camera up to 1KG
Structure2mm fiberglass and metal
Weight110g (excluding servos)
Stability augmentation2 axles
Camera shutter controlYes, standard 9g servo (servo not included)

, , , , , , Specifications:, , , , , , , , , , , Suggested servo: standard analog servo like Futaba 3003/3001. (Digital servo has a larger noise and may affect audio recording), , ,

Features: -Suit for most small cameras with standard mount screw ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby