HobbyKing
1:10 SCALE HARD PLASTIC COMPOUND CR-BLADE DRIFT TIRES (2PCS)
| Width | 26mm |
| Weight | 20g |
| Compound | Hard Plastic |
1:10 Scale Hard Plastic Compound CR-Blade Drift Tires (2pcs), Specs:,
5 Reviews
HobbyKing
HOBBYKING EDF HOVERJET (PLUG AND HOVER)
| Length | 355mm |
| Width | 225mm |
| Height | 110mm |
| Battery Plug | XT-60 |
| EDF | 55mm 6 Blade |
| Motor | 2225-2000kv |
| ESC | 10amp |
| EDF | 55mm 6 Blade |
| Motor | 2225-3650kv |
| ESC | 20amp |
Specs:, Lift System:, Thrust System:, Steering:, Thrust Vectored system using 1 x 9gram servo, Required:, 1800~2200mAh 3S1P Lipoly Battery, Note:, The HobbyKing EDF Hoverjet is designed for sealed surfaces and is not suitable for water.,
Like it fast? Like it sideways? Then HobbyKing EDF Hoverjet ...5 Reviews
HobbyKing
SERPENT S411 ERYX 3.0 190MM 1/10 (KIT)
| • V2 type hard composite all around | wishbones, uprights, castor blocks |
| • Brackets standard | 3.5/0.5 split blocks in the rear, 2.0/0.5 in the front |
| Other suggested items | Reamer/hole punch, CA glue, thread-locking glue, silicone fluid |
- Unique servo-holder: The unique and innovative servo holder has zero influence on tweak, as its floating above the chassis and mounted directly to the steering-assembly in the center of the car. This also keeps the weight lower than any other design., - DJC / CVD's spring-steel: This car is supplied with a complete set of 4 high quality hard coated spring-steel CVD shafts, which are a highly consistent, efficient and durable way to transfer all the power the surface. The front ones are V2 type double joint cardan DJC, the rear regular CVD style shafts., - Chassis plate: The newly designed very narrow chassis plate has been machined from 2mm 7075 T6 aluminum, lowered sides to lower the center of gravity and mount the electronics lower. All holes in the base of the chassis have been countersunk . The chassis further features extra holes to mount weights and additional stiffeners. All holes are as close to the center line of the chassis, to create even flex., - Lower Shock towers: The Serpent ERYX features lowered shock towers 2.5mm thick carbon fibre shock towers on the front and rear of the car. The upper shock-mount height is now 5,7mm lower than in the ERYX-TE. Each tower sports many holes for adjustment of the shock absorber angle while the rear tower also acts as the mount for the rear body posts and the front tower accommodates a 3rd front body post., Chassis:, Suspension:, Rear axle:, Front axle:, Drive system:, Shock absorbers:, Wheel base:, Track-width front:, Track-width rear:, 2-Channel radio system,
HobbyKing™ is now carrying another famous brand - Serpent! Both ...