NitroTek
NB16-T NITRO RADIO CONTROLLED TRUGGY
| 208MM | |
| 108MM | |
| 208MM | |
| 297MM | |
| 191MM | |
| 11.2 | |
| Toki 06 Size | |
| 73x39.5MM | |
| 19MM | |
| 2mm-thick hard anodized alum. | |
| Four wheel shaft drive | |
| 38cc | |
| Full set | |
| Four oil filled shocks | |
| Anodized aluminum | |
| Steel | |
| Bevel gear type | |
| Metal disc brake | |
| 2 shoe race spec | |
| Alloy manifold and tuned plastic pipe | |
| Adjustable | |
| Adjustable | |
| Pre-painted | |
| Fully built |
- ,
- ,
- 1/16 Scale mini nitro powered truggy ,
- High quality Toki engine ,
- Thick aluminium shock mounts ,
- Solid steel drive cups ,
- 2 piece racing clutch ,
- Disc brake system gives ultimate stopping power ,
- Sealed radio box protects electronics ,
- 27MHZ CE approved Radio system with changeable frequency crystals ,
- C-hub front and rear suspension ,
- Front & rear differentials ,
- Fully ball raced ,
- Metal manifold ,
- High torque mini servos ,
- Fully assembled ,
- Alum. upgrades available ,
- Front and rear anti roll bars fitted as standard ,
The NB16-T is a mini nitro radio controlled car with ...
NitroTek
ESKY CHINOOK 4CH RC HELICOPTER - 2.4GHZ
| 251mm | |
| 56mm | |
| 153mm | |
| 210mm | |
| 145g | |
| 4 x N30 | |
| 2.4GHz 4CH | |
| 7.4V 450mAh Li-polymer | |
| Digital 4g, 0.5kg/cm, 0.12s/60° |
- ,
- 3in1Controller (gyro, mixer, ESC) ,
- ,
- Completely assembled and tested at the factory. ,
- Twin coaxial rotor systems. ,
- Four high performance micro motors provide the ultimate in thrilling flight. ,
- Uses the latest 2.4GHz radio control system technology. ,
- Two high performance micro digital servos. ,
- 3 in 1 control unit provides amazing stability that newcomers will find reassuring. ,
NitroTek
F-5E TIGER 64MM 4CH RTF DUCTED FAN RC JET PLANE
| 532mm | |
| 939mm | |
| 500g | |
| 7dm2 | |
| 70g/dm2 | |
| 4Ch Tx & 6Ch Rx | |
| 5 x 9g servos | |
| 64MM Ducted | |
| Powerful 14L in-runner brushless | |
| 25A ESC | |
| 1300Mah, 11.1V LiPo | |
| 3000 feet (1000m) |
- ,
- ,
- 64 mm EDF ,
- 4 Channel Digital Proportional ,
- Full aerobatic characteristics ,
- Brushless setup ,
- Ready to fly in just minutes ,
- Super tough, lightweight airframe ,
- Perfect appearance and emulation ,
- Take off from ground or hand launched ,
- Excellent flight performance ,
- Stable inverted flight ,
- Made by Starmax - industry leaders in quality ,
- Slow speed flying capable ,
- Apr. 15 min's flight time per charge ,
NitroTek
HSP GLADIATOR 1/10TH SCALE NITRO OFF ROAD TRUGGY
| 400mm | |
| 160mm | |
| 300mm | |
| 275mm | |
| 5.84 | |
| 35mm | |
| 105mm | |
| Stick type | |
| Infinity .18 |
- ,
- ,
- Four wheel drive system ,
- Hi-spec easy maintenance diffs ,
- 6061/T6 anodized aluminum chassis ,
- 13.8g lightweight aluminum flywheel ,
- Disc brake system ,
- Extra large 75cc leak proof fuel tank ,
- Hard wearing truggy tyres ,
- Top quality 1/10th scale wheel rims ,
- Oil filled shock absorbers ,
- High flow dual foam element air filter ,
- 5-position adjustment on tower ,
- Camber, toe in/out adjustment ,
- 3mm shock towers, oil-pressured ,
- Composite lower arms, C-hub front arms, and turnbuckle upper links ,
- Front and rear bumpers ,
NitroTek
ESKY CO-COMANCHE 4CH RC HELICOPTERS- 2.4GHZ VERSION
| 340mm | |
| 242g | |
| 435mm,width | |
| 180 motor*2 | |
| 4CH (including training switch and simulator port. 2.4 Ghz | |
| (8g,1.3kg.CM,0.12s/60¡) | |
| 7.4V 800mAh Li-polymer battery |
- ,
- RTF ,
- 4 in 1 mix controller (W/gyro,mixer,ESC,receiver) ,
- ,
- Novel and distinct sculpt with high emulation art ,
- Designed for beginner and is suitable for indoor flight ,
- Lifter pulley and culvert tail rotor design ensure a more enjoyable flight ,
- Airline operation with graceful movements and sensitive reaction ,
- RTF after unwrapping the packing and fixing the battery and dispense with debugging ,
,
Flight simulator software and cable are included as well as four spare blades
, The Co-Comanche is one of the coolest looking helicopter RC ...NitroTek
WARRIOR 1/8 NITRO BUGGY - STANDARD VERSION WITH REMOTE STARTER
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
A remote start upgrade is available as an option.
, ,- ,
- New C-hub steering; ,
- Newly developed suspension; ,
- Twin adjustable rear suspension; ,
- Four wheel drive ,
- Lightweight ultra-compact gear box; ,
- Solid aluminum chassis; ,
- Width of only 129mm; ,
- Quicker steering and fast response; ,
- 16mm super big bore oil shocks; ,
- New gear ratio; ,
- Easy maintenance pinion gearbox; ,
- All Steel Gear; ,
- Adjustable Sway bar ball cups (Pro only); ,
- Adjustable high-downforce wing; ,
The Warrior is a fully built, fully featured, race ready, ...
NitroTek
P51 MUSTANG LARGE SCALE RC PLANE SILVER PNP VERSION
| 16*6 4 blades | |
| 1600mm | |
| 1400mm | |
| 2700g | |
| 4558 out runner motor KV400 | |
| 70A |
- ,
- Servo：4pcs*9G,, 2pcs*17G ,
- With flaps and retracts ,
- Main wing with LED ,
- ,
- Massive Large Scale Plane ,
- High Detailed Model ,
- Highly Durable Tough EPO Construction ,
- Can Take Off From Grass ,
- Powerful Brushless Motor ,
- Most electronics pre-installed ,
- All linkages and control horns pre-installed ,
- Amazing acrobatic ability ,
- Realistic replica livery ,
- With flaps and retracts ,
- LED navigation lights on main wing ,
NitroTek
GS RACING VISION PRO RTR NITRO RC CAR 2.4G
| 380mm | |
| 198mm | |
| 104mm | |
| F/R | |
| 260mm | |
| 172mm | |
| 11.69 | |
| 1700g | |
| 75cc | |
| 2.4GHz with LCD display | |
| Team Infinity .18 Nitro |
- ,
- ,
- ,
- Fully adjustable pivot ball suspension ,
- Finished pre-mounted body ,
- GS Racing camber clip system ,
- 75cc fuel tank with splash guard ,
- 2.4G Radio system included ,
- Sealed radio box with transponder mount ,
- GS fuel bottle and glowstarter included ,
- Powerful nitro engine ,
- 7075 aluminium alloy chassis – for lightness and strength ,
- Aluminium shock bodies with adjustable dampening system ,
- Front and rear sway bar system ,
- Lightened aluminium wheel hubs ,
- Aluminium 2 speed gear box system ,
- GS Racing camber clip system ,
- ,
NitroTek
GIANT AIRWOLF RTF 4CH RC HELICOPTER WITH LIPO BATTERY (7.4V 1500MAH)
| 1.5-2 Hours | |
| 8 minutes | |
| 80M | |
| 100 M | |
| 35.066MHZ, 35.120MHZ, 35.180MHZ | |
| Up/Down, Left/Right Rotation, Forward/Backward, Left/Right |
- ,
- 7.4V 1500mAh Lithium Rechargeable battery pack ,
- ,
- LARGE SCALE ,
- 4 Channel Full RC system ,
- Installed fast servos and 4-in-1 control unit ,
- Dual motors makes the Airwolf powerful and efficient ,
- FULLY ASSEMBLED ,
- READY TO FLY ,
NitroTek
SPITFIRE 4CH RC PLANE WITH RETRACTABLE LANDING GEAR 2.4GHZ RTF
| 47 inches (1200mm) | |
| 40 inches (1010mm) | |
| 42.32 oz (1200 g) w/Battery | |
| 1100kv outrunner brushless motors (installed) | |
| 2.4ghz 5 channel included | |
| 4 x 9g Servos installed | |
| Dynam Pro 30A Brushless with Switch-Mode BEC (installed) | |
| 3C 11.1V 2200 25C | |
| Average (10-18 mins) | |
| 45min |
- ,
- ,
- Powerful 1100kv brushless motors (installed) ,
- Everything included ,
- 2.4ghz 5 channel radio equipment ,
- Electric retractable landing gear ,
- Large 1200mm wingspan ,
- Realistic design ,
- High quality model from industry leader Dynam Rc ,
The warbird series has been expanded to include a scale ...
NitroTek
CONQUISTADOR NITRO RC MONSTER TRUCK
| 330MM | |
| 165MM | |
| 267MM | |
| 390MM | |
| 280MM | |
| 10.44 | |
| Team Infinity 18 | |
| 108*56MM | |
| 38MM/46MM |
- ,
- ,
- 1/10 Scale nitro powered car ,
- 4WD Shaft drive system ,
- Infinity 18 size pull start engine ,
- Oil-filled Alluminium shocks ,
- Single speed gear box ,
- Front and rear bevel differentials ,
- 75CC Fuel tank ,
- Metal disc brake system ,
- Pre-painted and cut body shell ,
- Sealed box for protecting receiver system ,
- High quality 27MHZ CE approved Radio system with changeable crystals. ,
Unstoppable power allows this off road truck to go where ...
NitroTek
BUG CRUSHER NITRO REMOTE CONTROL MONSTER TRUCKS
| 400mm | |
| 185mm | |
| 310mm | |
| 275mm | |
| 13.34 | |
| 30mm | |
| 60mm width 120mm diameter | |
| Wheel type | |
| Infinity .18 |
- ,
- ,
- Pivot Ball suspension ,
- Innovative spring loaded bumper ,
- 8 Oil-filled aluminium shocks ,
- 2.5mm thick anodised aluminium chassis ,
- Composite Tuned Pipe ,
- Pre-painted body with decals applied ,
- Super-efficient 4WD shaft-drive ,
- 75cc fuel tank with splash guard ,
- Hollow light weight flywheel ,
- Slipper clutch system to protect spur gear ,
- High impact & high traction electroplated wheels ,
- Fiber disc brake for extra stopping power ,
- Front and rear hardened metal drive gears ,
- Sealed radio box protects the electronics ,
- Adjustable steel turnbuckles ,
- High performance Infinity 18 Engine ,
- Wheel controller ,
This HSP nitro monster truck has been finished with a ...
NitroTek
ATTACKER 1/8 SCALE NITRO RC BUGGY
| 185mm | |
| 505mm | |
| 310mm | |
| 315~320mm | |
| 310mm | |
| 30mm | |
| 3300g | |
| 2 channel |
- ,
- ,
- 1/8 Scale Gas Powered Car ,
- Fully Assembled ,
- 4wd Shaft Drive System ,
- W/.18 Easy-To-Start Pull Start Powerful Engine ,
- Oil-Filled Aluminium Shocks ,
- Single Speed ,
- Front And Rear Bevel Differentials ,
- W/125cc Fuel Tank ,
- Quicker Steering And Fast Response ,
- Low Centre Of Gravity Design ,
The Attacker is our entry level to the world of ...
NitroTek
NB16 NITRO RADIO CONTROLLED BUGGY
| 187MM | |
| 108MM | |
| 126MM | |
| 232MM | |
| 177MM | |
| New Powerful Toki 05 nitro engine | |
| 70mm | |
| 18MM |
- ,
- Gear ratio: 11:1 ,
- ,
- Fully assembled ,
- Oil filled shocks ,
- Front & rear sway bar system ,
- 4WD shaft driven system ,
- Aluminium oil-filled shocks ,
- Bevel gear differentials ,
- Powerful .05 engine ,
- High torque mini servos ,
- AAA battery case for receiver ,
- 38cc fuel tank ,
- 14pcs ball bearings ,
- Hop-ups in alum coming soon ,
- 27MHZ CE approved Radio system with changeable crystals. ,
Mini nitro rc cars have been very popular since Acme ...
NitroTek
FLYING FISH ELECTRIC RADIO CONTROLLED DRIFT CAR
| 112mm | |
| 360mm | |
| 200mm | |
| 195mm | |
| 4.5mm | |
| RC540 | |
| 260mm | |
| 2ch Wheel type 27mhz | |
| 65mm | |
| 26mm | |
| 7.2v 1800MaH with charger | |
- ,
- Gear Ratio: 6:1 ,
- ,
- Four wheel drive system ,
- Front/rear camber and toe-in setup ,
- Powerful RC 540 motor ,
- Anodised aluminium centre drive shaft ,
- High performance front/rear diffs ,
- Stable rc car suspension arms & solid front/rear shock tower ,
- Oil filled aluminium capped shocks ,
- Precise steering fitting delivers quick response ,
- High precision SP03018 electronic speed control (ESC) ,
- Complete ball bearings for a smooth and an efficient drive ,
- High performance anti-skid drift tires, chrome plated spoke rims & pre-mount drift wheels ,
- 7.2v 1800mAh Ni-MH battery power ,
This HSP Flying Fish represents a new generation of 1/10 ...