SDSHobby
ALUMINUM MANIFOLD(FOR SH21CXP ENGINE)
,
This part can be used for CG94860/ CG94862/ CG94861/ CG94866/ ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (25A ESC + 2030 12T MOTOR +PROGRAM CARD) FOR 1/18 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| ESC | EZRUN-25A-Sensorless 1pcs |
| Motor | EZRUN-2030 12T Brushless motor 1pcs |
| Program Card | Digital LEDs Program Card 1pcs |
| Output | Continuous current 25A, burst current 90A |
| Input | 4-9 cells Ni-MH/NiCd or 2-3 cells LiPo |
| BEC Output | 6V/1.5A |
| Resistance | 0.005 Ohm |
| Motor Supported | Sensorless Brushless motor |
| u With 4-6 cells Ni-MH/NiCd or 2 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| u With 6-9 cells Ni-MH/NiCd or 3 cells Lipo | On-Road≥18T, Off-Road≥24T; |
| Suitable Car | 1/16 or 1/18 scale car for sportful race |
| Size | 31.5mm (L) * 27.5mm (W) * 16mm (H) |
| Weight (Without wires) | 23g |
| With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
| Turns | 12T |
| KV value | 7800KV |
| Diameter | 20mm |
| Motor length | 30mm |
| Extend shaft Diameter | 2.0mm |
| Length of extend shaft | 10mm |
| Weight | 46g |
The Combo Includes the Following Products:, Suitable Brushless Motor:, Features for ESC:, Compatible with all sonsorless brushless motor, Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection., Features for Motor:, Aluminum shell (case),
1/18 or 1/16 Ezrun Brushless ESC for Car 25A : ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (60A WATERPROOF ESC +KV3000 13T MOTOR +PROGRAM CARD) FOR 1/10 CAR ON-ROAD RACING CAR/ OFF-ROAD BUGGY
| Multiple protection features | Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. |
The Combo Includes the Following Products:, ESC:, Waterproof EZRUN-60A-Sensorless 1pcs, Motor:, EZRUN-3650M 13T, Program Card:, Digital LEDs Program Card 1pcs, Output Current:, Continuous 60A, burst 380A, Input:, 4-9 cells Ni-MH/NiCd or 2-3S Lipo, BEC Output:, 6V/1.5A, Resistance:, 0.0007 Ohm, Motor Supported:, Sensorless Brushless Motor, Suitable Car:, 1/10 4WD SCT, 4WD buggy/SCT (Include TRAXXAS 1/10 SCT), Size:, 31.5*27.5*24mm, Weight:, 35g, EZRUN-60A Brushless ESC:, EZRUN-3650M13TSensorless Brushless Motor for 1/10 Car:, KV Value:, KV3000, Turns:, 13T, Motor Diameter:, 36mm, Motor Length:, 50mm, Shaft Diameter:, 3.17mm, Shaft Length:, 15mm, Weight:, 170g, EZRUN-3650 13T Sensorless Brushless Motor:, Top quality materials:, u,
Brushless motor 1pcs EZRUN-60A-SL Waterproof ESC Features for Compatible with ...SDSHobby
TAIL WHEEL CONNECTION FIXED PIN
| This item can be used on these cars, item number | CGBM260 CGBM290 |
Application:,
SDSHobby
TANK (INCLUDING THE TANK COVER)
| This item can be used on these cars, item number | CGBM260 CGBM290 |
Application:,
SDSHobby
WASHER 12*3.1*0.5MM(FOR SHOCK BALLS MOUNT) 6P
,
This part can be used for CG94885/ CG94886.SDSHobby
HSP 1/18 SCALE RC ELECTRIC OFF-ROAD CRAWLER RTR (MODEL NO.:94680) WITH TWO WHEEL STEERING, 2.4G RADIO, RC260 MOTOR
| Length | 314mm |
| Width | 197mm |
| Wheelbase | 215mm |
| Weight | 0.85kg |
| Height | 140mm(body excluded) |
| Wheel Diameter | 98mm |
| Wheel Width | 35mm |
| Steering Angel | 40-50 degree |
| Maximum Torque Angel | 90 degree |
| Air Current | about 1A, Climb Current |
| Radio Control System | 2.4G |
| Battery | 7.2V 1100mAh Ni-MH |
| Motor | RC260 |
Specifications:, Gear Ratio: 1:88, Package Contents:, Features:,
Electric Off-Road Crawler 94680 .4G Radio Control 7.2V 1100mAh Ni-MH ...SDSHobby
HIGH-STRENGTH NYLON 2ND GENERATION FRONT WHEEL HUBS (A PAIR)
| This item can be used on these cars, item number | CG260A |
| CG290SC, also it can be used on Japanese HPI 1 | 5 gasoline cars. |
Application:,
ï1⁄4Œ CG260B ï1⁄4Œ CG260S ï1⁄4Œ CG260T ï1⁄4Œ CG290 ï1⁄4Œ CG290S ...