RCModelScout.

RCPlanet

Phoenix Models Tucano .40-.51 GP/EP ARF PMMA1565

, Wingspan:, 61.4" (1560mm), Length:, 49.2" (1250mm), Wing Area:, 581 sq in (37.5 sq dm), RTF Weight:, 6.2lb (2800g), Wing Loading:, 26oz sq/ft (79g sq/dm), Airfoil:, Semi symmetrical, low wing placement, Center of Gravity (CG):, 3.3" (85mm) back from the leading edge of the wing at the fuselage, Control Throws, Elevator:, Up & Down 0.39" (10mm), Rudder:, Right to Left 0.79" (20mm), Ailerons:, Up & Down 0.31"  (8mm), ,

This is the Phoenix Models Tucano .40-.51 GP/EP ARF Low Wing Sport Trainer Airplane. The Phoenix Models Tucano is recommended for beginner to intermediate pilots.
Features:
Made of balsa and plywood, most parts are laser cut
One-piece wing with an aluminum wing joiner tube
Painted fiberglass cowl
Clear canopy, double with two painted pilot busts
Radio compartment is plywood reinforced and easily accessible under wing
Pre-bent wire landing gear, 0.16" (4mm) diameter
Three foam wheels, 2.25" (57mm) diameter
Fuel Tank is approximately 12oz (360cc), section of foam included for cushioning
Non-adjustable composite construction, pre-mounted engine mount
Red plastic spinner, 2.25" (57mm) diameter
Factory applied Oracover covering
Dual servo aileron control
The Phoenix Model Tucano GP/EP ARF is a fast-building value for beginner to intermediate pilots. The Tuscano features a one-piece wing with aluminum joiner tube, balsa/plywood construction, a painted fiberglass cowl, two pilot figures, an attractive Oracover film trim scheme, a painted red spinner and so much more.
Includes:
One Phoenix Models Tucano .40-.51 GP/EP ARF Low Wing Sport Trainer Airplane with pre-built wing, fuselage and tail assemblies, wheels, cowl, engine mount, fuel tank, hardware package, two pilot busts, foam rubber, decal sheet, landing gear, aluminum wing tube and photo-illustrated instructions
Requires:For glow power;
Engine: .40 - .46 cu in (6.5 - 7.5 cc) 2-stroke
Muffler: Standard muffler supplied with engine-cowl must be cut
Servos: 5 standard size (2-aileron, 1-throttle, 1-rudder, 1-elevator)
Y-Harness: One, for aileron servos
Extensions: Two 6" (152mm) for aileron servos
Propeller: 11x6
For electric power;
Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
ESC: 60A
Propeller: 12x8 or 13x6.5
LiPo Battery 4S (14.8V) 30C, at least 4000mAh
Servos:  Four, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder)
For glow and electric power;
Radio: 4-channel
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, building and field equipment
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: 1/4" foam rubber padding, propeller, building and field equipment

Found 11 years, 1 month ago