ReadyMadeRC
Hobbywing LCD ESC Programmer
| Weight | 84g. |
This program card is suitable for the following ESCs:, 1. XERUN Series Car ESC (Version 2.0), Size:, 90mm (L) * 51mm (W) * 17mm (H), Input Voltage:, 4.8-6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box), are:, 3.1 Running Mode, are:, 3.1 Brake Setting, New:, Additional Instruction of 110119_STOCK firmware,
Model
Advanced Professional LCD Program Box
Manual
User Manual #1
User Manual #2
Accessory
Application Software of Advanced Program Box
Preview
This Advanced Program Box is used to set the programmable parameters of brushless ESC, it has a 16*2 characters LCD (Liquid Crystal Display) to get a friendly user interface, so you can set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.
2. EZRUN Series Car ESC (Version 2.0)
3. PLATINUM Series Helicopter/Aircraft ESC
1 Working Mode
1.1 Working as an
individual device
to set the ESC, the value of each parameter is displayed on its own LCD.
1.2 Working as an
USB adapter
to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
Specifications
2.1
2.2
2.3
3 Programmable Items
A) The programmable items for the
CAR ESC
3.2 Drag Brake Force
3.3 Low Voltage Cut-Off Threshold
3.4 Start Mode
3.5 Maximum Brake Force
3.6 Maximum Reverse Force
3.7 Initial Brake Force
3.8 Throttle Neutral Range
3.9 Timing
3.10 Over-Heat Protection
3.11 Motor Rotation
3.12 Lipo Cells
B) The programmable items for the
AIRCRAFT AND HELICOPTER ESC
3.2 Battery Type
3.3 Low Voltage Protection Mode (Cutoff Mode)
3.4 Low Voltage Protection Threshold (Cutoff Threshold)
3.5 Start Mode
3.6 Timing
3.7 Governor Mode
3.8 Motor Type
3.9 PWM Frequency
3.10 Built-In BEC Output
3.11 Motor Load
3.12 Lipo Cells
4 Application Software of the Advanced Professional LCD Program Box
Please click the following hyperlink to download the Application Sofrware.
Hobbywing_USB_Link_setup_V1.64_111011.rar
Compatible with all Hobbywing, Thunderpower, Turnigy and OEMRC Sentilon speed controllers.
Check price and availability
Found 11 years, 1 month ago