RCPlanet
Hitec Skyscout H2Go HRC13209
| Length | (977mm) |
| Wingspan | (1366mm) |
| Wing Loading | 25 g/sq dm |
| Wing Area | 28 sq dm |
| Center of Gravity (CG) | Approximately 3.3" (85mm) aft of the wing root leading edge on either side of the fuselage |
| Elevator | Up, 0.197" (5mm) Down, 0.157" (4mm) |
| Rudder | Right to Left, 0.393" (10mm) |
| Ailerons | Up, 0.315" (8mm) Down, 0.157" (4mm) |
, Control Throws-, , Note:, This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer., , ,
Hitec brushless electric powered, radio controlled, H2GO Sky Scout Airplane. For ages 14 and above. This version requires transmitter, battery and charger.
Combining the durability of a Multiplex pre-assembled airframe with the precision of Hitec electronics, the SkyScout is the perfect airplane for both beginner and experienced pilots. It features a protected top mounted powerful outrunner motor along with rudder and elevator controls and optional ailerons. With gentle gliding characteristics and easy-to-transport design, the SkyScout will soon become your favorite spunky flyer.
The SkyScout is available in three unique and convenient packages as well as a kit version. The R2GO comes "Ready to Go" with everything you need including a Hitec Lite 4-channel radio. The H2GO is the "Hitec to Go" version which is installed with all the necessary electronics and just requires a Hitec transmitter to link up and go. The P2GO package is pre-installed with the servos, motor and speed control and needs only the receiver, transmitter and motor battery to plug in and go. A kit version is also available, so pick your favorite and take to the blue skies with your very own Hitec SkyScout.
FeaturesL
Construction: Elapor foam
Wing: Two piece with composite wing joiner and optional ailerons
Motor: C2812-1100 brushless outrunner
Receiver: Hitec Minima 6S 2.4GHz
Servos: Two installed HS-55 servos for rudder and elevator control
Electronic Speed Control: HBE-18A
Propeller: Two-piece folding design, black in color
Building Time: Approximately two hours
Requires:
Battery: 11.1V 3-cell LiPo 1300-2200mAh, with at least a 15C discharge rating
Battery Charger: Compatible with selected battery
Transmitter: At least 4-channel compatible with included Hitec receiver
Maintenance and field equipment
Check price and availability
Found 11 years ago