SDSHobby
BRUSHLESS MOTOR BL5052 500KV FOR KDS600 HELICOPTER
| Max. Cont. Current (A) | 75A |
Specification:, :, Motor KV:, 500, Max. Cont. Power:, 3330W, Shaft Diameter (mm):, 5.98, :, 51.5, Shaft Length:, 78.5, External Diameter (mm):, 49, Working Voltage:, 44.4V, Stator Diameter (mm):, 40, Stator Thickness (mm):, 5, Model of Stator Arm:12, Magnetic Level:, 8, Weight:, 307,
Motor Length (mm) mm gSDSHobby
FSD 540-3660 KV2040 INRUNNER BRUSHLESS MOTOR FOR RC BOAT/RC CAR/RC MODEL
| KV (rpm/v) | 2040 |
| Total Weight (g) | 280 |
| Max. Power (w) | 1100 |
| Resistance (KΩ) | 0.0199 |
| Idle Current (A) | 2.2 |
| Efficiency | 85% |
| Application Fields | model helicopters, boats and cars |
| Cells Ni-Cd/Ni-MH | 6-18S |
| Cells Li-Po | 2-6S |
Specifications:, Motor Diameter (mm): 36, Motor Length (mm): 60, Shaft Diameter (mm):5, Shaft Length (mm): 16, Wire Winds: 12, Max. Current (A): 51, :2,
The number of poles Recommend Equipments (need to buy separately)SDSHobby
C SERIES OUTRUNNER BRUSHLESS MOTOR C3530-1700KV
Specifications:, KV (rpm/v):, , Motor Diameter (mm):35, Motor Length (mm):, , Shaft Diameter (mm):, , Shaft Length (mm):, 18, Weight (g):, 80, Power:, 350W, Wire Winds:, , Resistance (KΩ):, 42, Idle Current (A):, .2, ESC (A):, 30, Cells Ni-Cd/Ni-MH:, 6S-12S, Cells Li-Po:, S-4S, Prop:,
1700 30 4 8 Recommended Equipments (need to buy separately) ...SDSHobby
C SERIES OUTRUNNER BRUSHLESS MOTOR C2830-850KV
Specifications:, KV (rpm/v):, , Motor Diameter (mm):, , Motor Length (mm):, , Shaft Diameter (mm):, , Shaft Length (mm):, 13, Weight (g):, 60, Power:, 50W, Wire Winds:, , Resistance (KΩ):, 72, Idle Current (A):, 0.6, ESC (A):, 0, Cells Ni-Cd/Ni-MH:, 6S-12S, Cells Li-Po:, S-4S, Prop:,
850 7.8 31 3.175 14 Recommended Equipments (need to buy ...SDSHobby
FSD 2835-10 KV830 OUTRUNNER BRUSHLESS MOTOR FOR AIRCRAFT RC PLANE RC MODEL
| Running-Light Current(A) | 0.9 |
| Ni-Mh or Ni-Cd Battery(cell) | 6-12s |
| Lipo Battery(cell) | 2-4s |
| Running Current (A) | < 18 |
| Max pull (kg) | 1.1 |
| Propeller(IN) | < 11 |
| Resistance | 0.1420 |
Specification:, : 830, Max Permissible Current (A): 22, Weight(g): 68, Shaft Diameter(mm): 4, The Number of Poles: 14, :92%, :370W,
KV(RPM/V) × 7 Efficiency Max powerSDSHobby
A123 LI-FE BATTERY 2 CELLS 6.6V 2300MAH 30C FOR RC MODEL AIRPLANES WITH DEANS PLUG
| Capacity | 2300 mAh |
| Voltage | 6.6V |
| Max Charging Current | 5C /11.5A |
| Max Continuous Discharging Current | 30C /69A |
| Max Burst Discharging Current | 60C /138A |
| Weight | 150g |
| Battery Size | 71*26.5*52.5mm |
| Wire Length | 62mm/136mm |
| Application | RC Airplanes |
| Connector Type | Deans Plug and Balance Chargeable Plug |
Specifications:, ,
SDSHobby
HOBBYWING SKYWALKER 20A BRUSHLESS SPEED CONTROLLER/ ESC FOR RC QUADCOPTER
| Multiple program methods supported | transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field |
Specification:, Output:, Continuous 20A, Burst 25A up to 10 seconds, Input Voltage:, -3S Lipo, 5-9 cells Ni-MH, BEC:, A / 5V linear mode BEC, Refresh rate of the throttle signal:, 50Hz to 432Hz, Max Speed:, 10000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM (BLM = Brushless Motor), Size:, 42mm*25mm*8mm, Weight:, 19g, :, Banana Cathode Plug, Features:, Safety Arming Feature:, Regardless the throttle stick position, the motor will not spin after battery connected., Throttle Calibration Function:, Throttle range can be calibrated to be compatible with different transmitters., User programmable (The following items can be programmed):, 1. Brake:, on/ off, . Battery Type:, Lipo/ Ni-MH, 3. Cut-off Mode:, soft-cut/ hard-cut, 4. Cut-off Threshold:, Low/ Medium/ High, 5. Start Mode:, normal/ soft/ super soft, 6. Timing:, Low/ Medium/ High, Full protection:, Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection,
Plug (need to buy separately) (3pcs), T Anode Plug (1pcs) ...SDSHobby
HOBBYWING THROTTLE HUB FOR QUADCOPTER ESC
Applications:, 1. Use this throttle Hub to calibrate the throttle range for the Quattro ESC (The Quattro is an equipment in quadcopter, usually it has 4 ESCs in 1 board);,
. Use this throttle Hub as throttle signal distributor for ...SDSHobby
HIGH QUALITY 200 METER HEAT SHRINKABLE TUBING DIA. =2MM (RED, BLACK ,BLUE,YELLOW COLOR)
| Type | 2mm |
| Color | Red, Black ,Blue,Yellow |
| Length | 200 meter |
| Material | PVC |
| Working Temperature | -55 to 125 Celsius Degree |
| Temperature Resistance | 105 Celsius Degree |
| Shrink Ratio | ≥48±5%, 2 |
| Nominal Voltage | 300V |
Specifications:, Application:, The heat shrinkable tubing is mainly used for wire connection, solder joint protection, electronic device protection and insulation treatment, metal surface protection etc.,
SDSHobby
THREE IN ONE CDI REMOTE SWITCH WITH LARGE CURRENT SWITCH AND DIGITAL DISPLAY
| Working Voltage | 4.2-13V |
| Switching Current | 0-15A |
| Isolation Switch Working Voltage | 4-8V |
| Isolation Switch Current | 0-3A |
| Weight (include cable) | 60g |
Features:, Specifications:, Note:,
Built-in CDI Remote Switch makes flying safer. Independent CDI power ...SDSHobby
XQ POWER 20KG/57.5G DIGITAL SERVO XQ-S4020D WITH TITANIUM GEAR/ALUMINUM CASE
Specifications:,
SDSHobby
WRENCH 14MM/ 3MM/ 4MM-BROWN FOR EME DLE GAS ENGINE
Specifications:, Net Weight:, 73g, Dimension:, 14mm/ 3mm/ 4mm, Features:, Kindly Remark:, The following colors are available, please confirm the color and item number when purchasing., Red Color:, T80147-R, Brown Color:, T80147-Z, Blue Color:, T80147-B,
The wrench is consist of socket spanner and hex wrench ...SDSHobby
PX3412 PROLUX 1.5A-230V PEAK DETECTION CHARGER FOR NI-CD/NI-MH BATTERY
| Selectable charging rate | AV 4-8 cell |
Specifications:, Input Voltage:, AC 210-240V, Input Plug Type:, European Standard, Output Plug Type:, Tamiya Plug (8mm width), Recommended Ni-Cd/Ni-MH Battery:, 4-8S, Features:,
For charging 4-8 cell Ni-Cd/Ni-MH Batteries peak with Tamiya connector ...SDSHobby
GENSACE NI-MH SC 2400MAH 7.2V 6S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 2400mAh |
| Voltage | 7.2V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 53g |
| Discharge current | 10C; MAX Discharge current |
| Connector | tamiya connector, and the connector can be customized according to customer demand |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENS ACE NEW DESIGN HIGH QUALITY 5000MAH 65C 2S 7.4V LIPO BATTERY WITH T PLUG
Specifications:, Capacity:, 5000mAh, Discharge Rate:, 65C, Voltage:, 7.4V, Charge Current:, Max.10A (2C), Charge Voltage:, 8.4V, Continuous Discharge Current:, Max 325A, Dimension (H*W*L):, 5.1*46.5*138(mm), Net Weight (g):, 352g, Plug Type:, T plug and balance charger plug, Features:,
A layer of wire cover and sponge are wrapped around ...