RCPlanet
THUNDER TIGER PRO-21M-OB OUTBOARD MARINE ENGINE TTR9568
, Displacement(c.c./cu.in.):, 3.46 c.c./.211 cu.in., Bore(mm/in.):, 16.6 mm/0.654 in., Stroke(mm/in.):, 16.0 mm/0.630 in., Practical R.P.M.:, 3,000 ~ 38,000 rpm, Output(BHP/RPM):, 2.10 BHP/30,000 RPM, Weight(g/oz):, 720 g/25.39 oz, ,
This is the Thunder Tiger Pro-21M-OB Outboard Marine Engine with ...RCPlanet
THUNDER TIGER PRO .46 BB ABN W/MUFFLER TTR9141
| Break-In | 11x5 |
| Sport and Scale | 10.5x6, 11x6 |
| Aerobatic | 10x6.5, 10.5x6, 11x5 |
, Displacement:, .455 cu in (7.46cc), Bore:, .853" (21.8mm), Stroke:, .7874" (20mm), Power Output:, 1.43 HP @ 16,000 RPM, Maximum RPM range:, 2,000 - 17,000 RPM, Practical RPM range:, 2,500 - 14,000 RPM, Weight (w/muffler):, 17.01oz (482g), Crankshaft thread size:, 1/4-28, Crankcase width (for engine mount):, 1.36", Exhaust mounting width (center to center):, 37mm, Overall height:, 3.4" (87mm), Overall width (w/mount flanges):, 1.97" (50mm), Overall length (backplate to front of drive washer):, 3.39" (86mm), Recommended prop size:, Recommended prop size:, Recommended prop size:, ,
Thunder Tiger Pro Series engines are equipped with twin ball ...RCPlanet
THUNDER TIGER PRO .39H RINGED TTR9604
, Displacement:, 0.394 cu in (6.45cc), Bore:, 0.850" (21.6mm), Stroke:, 0.693" (17.6mm), Output:, 1.35 hp @ 16,000 RPM, RPM Range:, 2,000 - 17,000, Weight w/o Muffler:, 10.23oz (290g), ,
Thunder Tiger Pro-39H delivers smooth power for sport and 3D ...RCPlanet
THUNDER TIGER PRO .28BX-R W/SLIDE CARB TTR9477
, Displacement:, 0.282 cu in (4.63cc), Bore:, 0.720" (18.3mm), Stroke:, 0.693" (17.6mm), Practical RPM:, 3,000 - 36,000, Output:, 2.40 HP @ 30,000 rpm, Carburetor Settings, Needle Valve:, 3 - 3-1/2 turns counterclockwise from closed, Mixture Metering Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 3.7" (94.5mm), Height from Crankcase Bottom to Top of Cylinder Head:, 4.2" (108mm), Width at Mounting Tabs:, 1.8" (45.4mm), Width of Crankcase below Mounting Tabs:, 1.2" (31mm), Center of Mounting Holes Same Side:, 0.83" (21mm), Center of Mounting Holes Opposite Side:, 1.4" (36.9mm), Center of Crankcase to Front Bearing:, 1.8" (45.9mm), Distance from Starter to Front Bearing:, 3.3" (84.8mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,
Thunder Tiger PRO series are manufactured by automated computer-controlled machinery, ...RCPlanet
THUNDER TIGER PRO .28BD-R ENGINE TTR9473
, Displacement:, 0.282 cu in (4.63cc), Bore:, 0.720" (18.3mm), Stroke:, 0.693" (17.6mm), Practical RPM:, 3,000 - 35,000, Output:, 2.40 HP @ 30,000 rpm, Carburetor Settings, Needle Valve:, 3 - 3-1/2 turns counterclockwise from closed, Mixture Metering Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Note:, carburetor is preset from the factory and requires only small adjustments, ,
Thunder Tiger PRO series engines are manufactured by automated computer-controlled ...RCPlanet
THUNDER TIGER PRO .21BX-R W/SLIDE CARB TTR9475
, Displacement:, 0.213 cu in (3.49cc), Bore:, 0.661" (16.8mm), Stroke:, 0.661" (16.8mm), Practical RPM:, 3,000 - 36,000, Output:, 2.15 HP @ 30,000 rpm, Weight:, 16.23oz (460g), Carburetor Settings, Needle Valve:, 3 - 3-1/2 turns counterclockwise from closed, Mixture Metering Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 3.7" (94.5mm), Height from Crankcase Bottom to Top of Cylinder Head:, 4.2" (108mm), Width at Mounting Tabs:, 1.8" (45.4mm), Width of Crankcase below Mounting Tabs:, 1.2" (31mm), Center of Mounting Holes Same Side:, 0.83" (21mm), Center of Mounting Holes Opposite Side:, 1.4" (36.9mm), Center of Crankcase to Front Bearing:, 1.8" (45.9mm), Distance from Starter to Front Bearing:, 3.3" (84.8mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,
Designed to achieve the easiest operation and max performance over ...RCPlanet
THUNDER TIGER PRO .18BX W/ROTARY CARB TTR9442
, Displacement:, 2.97 cc. / 0.181 cu. in., Bore:, 16.20 mm. / 0.638 in., Stroke:, 14.4 mm. / 0.567 in., Practical RPM:, 3,000 ~ 32,000, Output:, 0.80 BHP / 31,000 RPM, Weight:, 248 g. wo/muffler / 8.74 oz., ,
Thunder Tiger PRO series engines are manufactured by automated computer-controlled ...RCPlanet
THUNDER TIGER PRO .12BK W/ROTARY CARB TTR9459
, Displacement:, .129 cu in (2.11cc), Bore:, 0.545" (13.85mm), Stroke:, 0.551" (14.0mm), Practical RPM:, 3,000 - 30,000, Output:, 0.60 HP @ 29,000 rpm, Weight:, 8.28oz (234g), Carburetor Settings, Needle Valve:, 2-1/2 - 3 turns counterclockwise from closed, Air Bleed Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 2.7" (68.3mm), Height from Crankcase Bottom to Top of Cylinder Head:, 3.1" (80mm), Width at Mounting Tabs:, 1.6" (39.5mm), Width of Crankcase below Mounting Tabs:, 1" (25.4mm), Center of Mounting Holes Same Side:, 0.43" (11mm), Center of Mounting Holes Opposite Side:, 1.2" (32mm), Center of Crankcase to Front Bearing:, 1.3" (34.5mm), Distance from Shaft Starter to Front Bearing:, 2.6" (66mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,
Thunder Tiger new Pro-12/15/18 are available in several versions with ...RCPlanet
HPI ENGINE MOUNT BRACE SET BAJA HPI87454
, Length:, 5" (127mm), Thickness:, .15" (4mm), Height:, 1.5" (38.1mm), ,
This is the HPI Woven Carbon Fiber Engine Mount Brace ...HiModel
SK 130 AR ACRO ENGINE W/MUFFLER
| Prop shaft diameter | 9.45mm/ 0.37 inch |
| Suitable Prop | 16x 6 / 17x 6 |
| Distance between mounting holes on same side | 0.98" (25mm) |
| Distance between mounting holes on opposite side | 2.3" (58.4mm) |
| Height from bottom of crankcase to top of cylinder head | 4.6" (116.8mm) |
| Height from center of crankcase to top of cylinder head | 3.5" (89mm) |
| Width at mounting flanges | 2.75" (69.85mm) |
| Width at crankcase | 1.8" (45.72mm) |
, , , , , , Specifications:, , , , , , , , , , , weight：730g / 25.75oz (without muffler); 980g/ 34.57oz（with muffler）, MOUNTING DIMENSIONS:, , ,
Features: The SK line of engines is produced in our ...HobbyKing
O.S. FS-95V RINGED FOUR STROKE GLOW ENGINE
| Suggested Propellers | #F Glow Plug |
Displacement:, Bore:, Stroke:, Practical rpm:, Output:, Engine Weight:, Muffler Weight:,
In 1936, Shigeo Ogawa set up his original machine-shop, making ...