RCPlanet
HPI Nitro Star T-15L Engine Pullstart HPI15180
, Displacement:, 0.15 cu in (2.49cc), Bore and Stroke:, 15.0 x 13.6mm, Maximum Power:, 1.2hp/29,000 RPM, Height from Crankcase Bottom/top of Cylinder Head:, 3.9" (98.7mm), Distance/Mounting Tab to Exhaust Mounting Hole Center:, 1.4" (36.2mm), Distance/Starter to Front Bearing:, 2.7" (70.1mm), Mounting Hole Centers Opposite Side:, 1.2" (31mm), Mounting Hole Centers Same Side:, 0.43" (11mm), Width at Mounting Tabs:, 1.6" (40mm), Front Mounting Hole Center to Front Bearing:, 1.2" (29.5mm), Center of Carburetor to Center of Crankshaft:, 0.97" (24.7mm), Cylinder Head Diameter:, 1.9" (49mm), Crankshaft Size:, UNF 1/4-28, Carburetor Settings, High Speed Needle:, Flush with carb body, Low Speed Needle:, Flush with carb body, turn needle in 1/8 turn increments to adjust-no more than two turns from flush, Idle Adjustment Screw:, Set so that clutch does not engage, turn counter clockwise to reduce idle speed, clockwise to increase it, Note:, High and low speed needles are factory set and not recommended to be changed., ,
HPI Racing Nitro Star T-15L Engine With Pullstart. Genuine HPI quality spare part for easy maintenance and repairs. Specially designed for laydown fitting in the Nitro Monster King. Pullstarter assembly and carburettor have been rotated to facilitate correct fitting in laydown position. However, this engine can still be fitted to any application requiring a standard engine, where the standard T-15 would fit.
Fits any glow powered car or truck that accepts small block (.12-.15) size engines with pull starters
ABC piston and liner construction "A"luminum piston with a "B"rass cylinder liner that is "C"hrome plated
5.5mm rotary carburetor
HPI R4 medium cold glow plug
Standard crankshaft
Side exhaust
Compatible with the HPI Roto Start 2 Electric Starter System
Two year limited warranty through HPI beginning at date of purchase
Requires:
Fuel: Car blend glow fuel with 20-25% nitro content
Glow starter and track equipment
Check price and availability
Found 11 years, 1 month ago