HobbyWireless
R2400-STD 2.4GHZ HIGH SENSITVITY RECEIVER STANDARD - LAWMATE
| - Operating voltage | Vcc, 10.5V (minimum), 12V (typical), 13V (maximum). |
Details:, This receiver is part of the success of our wireless systems.,
The sensitivity is a very important point, giving the wireless ...HobbyWireless
TR905 COMBO SET RECEIVER +TRANSMITTER 900MHZ 500MW
Details:, This is a great set of 500mw 0.9 GHz (900 MHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR512 COMBO SET RECEIVER +TRANSMITTER 1.2GHZ 500MW - LAWMATE
| - 1.2 GHz frequency band, 6 channels | CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040 MHz. |
Details:, , Note:, The 1.2 GHz video system can safetly be used with any 2.4Ghz radio transmitter., Package Includes:, , Transmitter Specs:, , Receiver Specs:, , Avoiding Permanent Damage:, Before applying power to your transmitter, double check for correct polarity. Also make sure the power source doesn't exceed 12 VDC which will not be covered by the warranty.,
(We can't ship this item to US address, because the ...HobbyWireless
TR1024 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 1000MW - LAWMATE
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications,(for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Note: We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles. In this case our 900Mhz or 1.2Ghz systems are the right choice., Package Includes:, - Transmitter 2.4ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 2.4 GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
ZAP FOAM SAFE CA KICKER - 2 OZ
Details:, , Description:,
ZAP foam safe kicker can be used along with ZAP ...HobbyWireless
QUEST 14 IN PARACHUTE ACCESSORY
Details:, , Product Description:, The Quest model rocket parachute is a bright yellow and red LDP parachute emblazoned with the Quest logo. Comes with 6 Tyvek gripper tabs and 3 pre-cut shroud lines. To extend the life of your model rocket parachute: lightly wrap the parachute in a single sheet of recovery wadding to protect against the hot gasses produced on ejection.,
HobbyWireless
APC 8 X 6 THIN ELECTRIC PROPELLER
Details:, , Description:, APC 8 x 6 THIN ELECTRIC PROPELLER,
HobbyWireless
APC 11 X 4.7 SLOW FLYER PROPELLER
Details:, , Description:, APC 11 X 4.7 SLOW FLYER PROPELLER,
HobbyWireless
3D WOBBLY ADAPTER - 1.5 MM - PROPSAVER
Details:, , Description:, NEW! 3D Wobbly ADAPTER - PROPSAVER For GWS and APC SLOWFLYER props - fits 1.5 mm shafts - 1 O-RING included - Great for the Feigao Brushless Motors,
HobbyWireless
POWERSHIELD REVERSE VOLTAGE AND OVERCURRENT PROTECTOR
Details:, Powershield reverse protector will prevent your FatShark or other devices that uses a 2.1mm barrel connector.,
HobbyWireless
FATSHARK PREDATOR VIDEO GLASSES - HEAD TRACKER VERSION
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| Power supply | 7 - 13 V (2S/3S supply) |
| Weight | 150g |
| Operating Frequencies | 5.8 Ghz Module |
Details:, Brand new, Optics:, , Audio:, , User Controls:, , Electrical:, , Power consumption (@7.4V nominal):, , Antennae:, , Mechanical:, , Predator includes:, - Predator VGA headset with integrated head tracking and 5.8G receiver., *Note: The included manual shows the battery as included, however many customers rather get a discount and use their own 2S 7.4 lipo battery. You will need,
Fat Shark Predator is a fully equipped VGA FPV headset ...HobbyWireless
FATSHARK HEAD TRACKER CABLE FOR JR RADIOS
| Lenght | 3' feet 1m |
| Connector Type | PS2 to 3.5mm |
Details:, This cable allows you plug your JR radio to Fatshark Head Tracker.,
It will work with M.I.G. or Module Head tracker and ...HobbyWireless
TX-V313 300MW 1.3 GHZ PLUG AND PLAY TRANSMITTER ONLY.
| (CH1 | 1240 MHz) |
| (CH2 | 1280 MHz) (Only channel 2 is available if shipped to USA) |
| (CH3 | 1320 MHz) |
| (CH4 | 1360 MHz) |
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, , The plug and play board has lots of important features built-in such as:, , Channels:, , Features:, * 300mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
FATSHARK BASE VIDEO GLASSES REPLACEMENT CABLE
Details:,
Replacement Cable for FatShark Base Video GlassesHobbyWireless
FAT SHARK ATTITUDE SD FPV VIDEO GLASSES + TRANSMITTER KIT
| Power consumption at 7.4V | wired 150mA, wireless 300mA(wired/wireless) |
| Operating Frequencies | 5740 MHz, 5760 MHz, 5780 MHz, 5800 Mhz, 5820 MHz 5840 Mhz 5860 MHz |
| Power required | 7 - 13 V (2S/3S lipo battery) plug |
| Adjustable interpupillary distance | 59 - 69 mm. |
Details:, The Attitude SD came to stay., Specifications:, -90dBm 5.8G 7 channel receiver (new rx AWRX682), Includes:, 1x Attitude SD headset,
Based on the success of it's predecessors the Attitude SD ...