ReadyMadeRC
1.2GHZ 1000MW 8CH WIRELESS A/V TRANSMITTER MODULE (LM-US)
| Output Power | 1000mW |
| Nominal output impedance | 50 ohms |
| Operating voltage | 10.5-13V DC |
| Supply current | 500mA (maximum) |
| Sub carrier frequency | 6.5MHz |
| Dimension | 50 x 26 x 13mm |
| Weight (transmitter only) | 20g |
| Includes | Transmitter |
Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Lawmate 1.2Ghz 1000mW AV Transmitter (US VERSION LOCKED ON 1280MHZ) ...ReadyMadeRC
1.2GHZ LAWMATE 8CH WIRELESS A/V RECEIVER UPGRADED SAW FILTER
| https | //www.facebook.com/ReadyMadeRC/posts/525054860857769 |
| Operating Voltage | DC 12V |
| Power Consumption | 240mA |
| Dimensions | 80 x 63 x 20mm |
| Weight | 95g |
| Antenna Connection | SMA |
Includes:, Standard Lawmate 1.2GHz receiver, Frequencies:, , For channel selection: All switches should be in the "up" position except for the switch number that matches channel you are using. The A/B switch should be on A for channels 1-4, and B for channels 5-8.,
Due to reliability, performance, and support problems, we will no ...ReadyMadeRC
SKYLARK TRACE OSD III
,
Features Easy to install and easy to use. PAL/NTSC compatible ...ReadyMadeRC
ASSEMBLED ANTENNA PAN/TILT FOR EAGLEEYES ANTENNA TRACKER
,
Antenna pan/tilt assembly kit designed to work with the Eagle ...ReadyMadeRC
RMRC-PICO-WIDE 5V (3.3-6V) ULTRA COMPACT WIDE ANGLE PAL
,
NOW WITH A WIDER ANGLE VIEW! 90 degree verses the ...ReadyMadeRC
AIRWAVE 2.4GHZ A/V RECEIVER
,
This fully assembled 2.4GHz A/V receiver is based on Airwave's ...ReadyMadeRC
100MW 5.8GHZ A/V TRANSMITTER (FATSHARK)
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 20 grams |
| Size | 57 x 34mm |
| Input voltage range | 6 - 12vDC |
| Input power | 1.5W |
Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
High Quality 100mW 5.8GHz transmitter. Compatible with ImmersionRC, FatShark, and ...ReadyMadeRC
CAMERA/TRANSMITTER CABLE COMBO WITH OSD CABLE OPTIONS
Below is a list for compatibility of the various camera and transmitter cables:, , Transmitter Cables:,
Take out the guesswork and get a better deal by ...ReadyMadeRC
1.3GHZ BIQUAD ANTENNA (IBCRAZY)
,
A BiQuad is two full wave bisquare antennas in parallel ...ReadyMadeRC
STROBON XL POLICE STROBE (RED/BLUE) WITH WIRES
| Weight | 3.3g without cable |
| Dimentions | 51x18x7mm |
| Screw Hole Dimentions | 3mm holes with 43mm space |
| Working Voltage | 5-6v (we are suggesting 3A UBEC and 2S lipo for supply) |
| Current Consumption | 5mA(idle)/80mA(average when working) |
| Wire Length | 30cm standard servo cable with Futaba servo plug |
Features:, ,
New generation STROBON with remote controllable powerful RED - BLUE ...ReadyMadeRC
CUSTOM 1.3 FPV STARTER PACKAGE: 1258/1280MHZ US VERSION
| Instructions | HERE |
Package starts with the following components:, , NOTE: if you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery., *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
Eagle Tree OSD Pro-Ready...see option below! Using the new line ...ReadyMadeRC
2.3 GHZ 10DBIC RHCP CROSSHAIR ANTENNA (IBCRAZY)
| Frequency | For 2.3GHz channels only! |
| Weight | 0.4lbs (.2 kg) |
| Size | 5.5"x5.5"x2" (14x14x |
ReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...ReadyMadeRC
MULTIPLEX LARGE TRAINER ADAPTER FOR TSLRS V6 TX
,
A high quality trainer adapter cable with a military grade ...ReadyMadeRC
8W V6 PRO BOOSTER FOR 433MHZ DIGITAL SYSTEMS
| FEATURES of V5 | added safety and security |
Vin, Current in, RF Power Out, Efficiency:, 9.0V 2.58A 9.12W 39% DO NOT GIVE UNIT OVER 8V, Different cable types have different loss, here is the max length allowed using different cables:, RG-58CU 18meters (59ft), Old 3xx rx firmware:, The ultra sensitive receiver will be blocked/jammed if distance to booster antenna is under 10-20meters so avoid that !, NEW 307-308 or higher RX firmware:, No more blocking problems, an RX can be as close as 25cm (10 inch) from a booster at 7W before minor blocking is detected., WARNING:, Power supply MAX is 8.4V, max supply current 2.5A, newer ever exceed that., Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Here is the NEW PA Booster version 6 PRO, again ...