Hobby-Lobby
10 Amp Pro Brushless ESC
| Brake | Yes - Programmable |
| Continuous Maximum Current | 10A |
| Momentary Peak Current | 12A (15 sec) |
| Length | 1.2 in (30mm) |
| Width | 0.7 in (17.5mm) |
| Height | 0.4 in (10mm) |
| Weight | 0.35 oz (10g) |
10 Amp Pro Brushless ESC Highlights:, Up to 10-amp continuous current with proper air flow, Technical Specifications:, 10 Amp Pro Brushless ESC Specs:, Input Connector Types:, 20AWG with JST connector, Output Connector Types:, 20AWG with 2mm Female Gold Bullet Connectors, Cells w/BEC:, 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd,
10 Amp Pro Brushless ESC with advanced programming and BEC
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2-3 cell Li Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70 percent of battery starting voltage
Programmable throttle input range (1.1ms-1.9ms or Auto Select)
Auto motor shut down if signal is lost or there is interference
Programmable timing-2 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors-JST on battery input and 2mm female gold bullets on motor output leads
Soft start
Check price and availability
Found 11 years ago