|Technical Specifications||800mAh 3S 11.1V 15C LiPo, 20AWG JST/Balance Specs|
|Wire Gauge||20 AWG|
|Weight||2.2 oz (62.4mm)|
|Length||2.75 in (70.0mm)|
|Width||1.00 in (25.4mm)|
|Height||0.68 in (17.3mm)|
|Maximum Continuous Discharge||15C|
|Maximum Continuous Current||12A|
|Charge Protection Circuitry||Yes|
Configuration: 3S, ,Technical Specifications: 800mAh 3S 11.1V 15C LiPo, 20AWG JST/Balance Specs: ...
|Technical Specifications||500mAh 1-Cell 3.7V 12C LiPo Specs|
|Length||2.25 in (58mm)|
|Width||0.75 in (18mm)|
|Height||0.25 in (6mm)|
|Maximum Continuous Discharge||12C|
Configuration: 1S, ,Technical Specifications: 500mAh 1-Cell 3.7V 12C LiPo Specs: Type: LiPo ...
|Technical Specifications||AC/DC Pro Charger with Power Supply - US Specs|
|Battery Type||NiCd, NiMH, Li-Ion, LiPo, LiFe, Lead-Acid|
|Length||5.35 in (136mm)|
|Width||3.54 in (90.0mm)|
|Height||1.18 in (30.0mm)|
,If you have been searching for just one RC battery ...
Balance charges 1-6 cell Lithium packs at up to 10A 6" x 4-1/2" x 2-1/8". Powerful microprocessor controlled rapid charger for NiCd/NiMH/LiPo/LiIon/LiFe/Pb batteries. The maximum charge power is 200W and maximum charge current is 10A. Comes complete with temperature probe to safely monitor charge temps and terminate charging if temperature exceeds set parameters. Charger monitor program disc is included and the USB cable to connect the charger to your computer allowing the user PC based analysis of the charge process and the health of their battery packs. NOTE: When balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. B6-Ultimate Instruction Manual PDF B6 Ultimate Specs: Operating Voltage Range: 11-18V DC Circuit power: Max charge power 200W, Max discharge power 25W Charging current range: 0.1A -10A Discharge current range: 0.1A-5.0A Current drain for balancing: 200mA/cell LiPo/LiFe/LiIon Cell Count: 1-6 cells NiMH/MiCd: 1-18 cells Pb charging: 2V-24V USB Port: 5V 1A continuous Weight: 21.41 oz. (607g), ,Balance charges 1-6 cell Lithium packs at up to 10A ...
Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" x 1-3/16". Charges Lithium Polymer, Ion and LiFe (a123) cells up to a maximum of 4S and 3.5A rate when connected to a 12V DC power source. Integrated balance circuit and large LCD display showing voltage, current, capacity and charging time. Includes input lead with alligator clips to attach to a 12V battery and an output lead with 3.5mm banana plugs to connect to the charger. You will need to solder the mating connector for your battery type to the output connector. For use with up to 4S JST-XH balance plug (2.5mm pin spacing). These plugs are on our current RTF, ARF models and our Powerwing Lipos. Balance adapters SRC510, SRC513, SRCH0132, and SRCH0133 will not fit this charger, they are designed for a 6-cell charger. 40 Watt Balance Charger Specs: Input voltage: 11-15 Volt DC No. of cells: 1-4 Battery type: LiPo/LiIon/LiFe (a123) Charge current: 0.1-3.5A (40W) LCD type: Voltage, Current, Capacity, Charging Time and Battery Type Weight: 6.4 oz. (180g), ,Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" ...