RCModelScout.

SDSHobby

iMax Quattro B6 Compact Balance Charger

Processing time limit:, You can also limit the maximum process time to avoid any possible defect., Charging Specifications:, Battery Type, Specifications:,

Optimized operating software
iMAX Quattro B6 features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for Lithium batteries, it
can prevent the overcharging which may lead to an explosion due to the user's fault.
It can disconnect the circuit automatically and alarm once detecting any malfunction.
All the programs of this product were controlled through two way linkage and com-
munication, to achieve the maximum safety and minimize the trouble.
All the settings can be configured by users!

Internal independent lithium battery balancer
iMAX Quattro B6 employs an individual-cell-voltage balancer. It isn't necessary to
connect an external balancer for balance charging.

Balancing individual cells battery discharging
During the process of discharging, iMAX Quattro B6 can monitor and balance each
cell of the battery individually. Error message will be indicated and the process will
be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to various type of lithium battery
IMAX Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion,
LiPo
and the new LiFe series of batteries.

Data store/load
The maximum five batteries' data can be stored for users' convenience.
You can keep the data pertaining to program setting of the battery of continuous
charging or discharging.
Users can call out these data at any time without any special program setting.

Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge
is operable for battery refreshing and balancing to stimulate the battery's activity.

Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of
charging, whereas 'store' state can control the final voltage of your battery, so
as to store for a long
time and protect useful time of the battery.

Maximum safety
principle of the Delta-peak voltage detection. When the battery's voltage exceeds
the threshold, the process will be terminated automatically.

Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or
NiMH battery; it is useful for the NiMH battery of low impedance and capacity in
the 'AUTO' charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by time.
If the charging capacity exceeds the limit, the process will be terminated automatically
when you set the maximum value.

Temperature threshold*
The battery's internal chemical reaction will cause the temperature of the battery to rise.
If the temperature limit is reached, the process will be terminated. * This function is
available by connecting optional temperature probe, which is not included in the package.

PC based analysis uing USB Communication
iMAX Quttro B6 offer PC based program can analysis the characteristic of the
battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows
the individual voltage of each cell in the Lithium battery pack.
PC-LINK USB adaptor can be purchased separately

Voltage Level

Max Charge Voltage

Max Fast Charge Rate

Min. Discharge Cutoff Level

NiCd

1.2V /Cell

1 - 2C*

0.85V / Cell

NiMh

1.2V /Cell

1 - 2C*

1.0V / Cell

Li-ion

3.6V / Cell

4.1V / Cell

1C
.5V / Cell

LiPo

3.7V / Cell

4.2V / Cell

1C

3.0V / Cell

LiFe

3.3V / Cell

3.6V / Cell

4C
.0V / Cell

Pb (Lead Acid)
.0V / Cell
.46V / Cell

0.4C

1.75V / Cell

Four Output

Found 11 years ago