SDSHobby
Mini Servo Sectionboard Power Box for gas plane with 20A UBEC
| 1.Working voltage | 7-13V |
| .Steering current, voltage | 0-20A,4.8-9 .7 V (factory voltage is 5.2V) |
| 3.Weight | 80g |
| 4.Volume | 116mm(long)*88mm(wide)*13mm(height) |
| 5.Working temperature | -20°C to 85°C. |
Description:, The product is mainly used for the servo with large regular vane’s airplane, such as gasoline engine. This product can distribute several strings’ power. The sectionboard integrates CDI remote flameout swiches and reserves position for receiver, which make servo’s lines convenient and tidiness. If you use double powers input to the power supply, it will be more stable and more security., Technology Parameters:, Features:, 1. Eight channels for input, and sixteen channels for output.(every one channel input with two channels output ),
. Integrates CDI remote flameout switches. Through each channel of the remote controller or switch channel(usually choose a switch channel) can make the gasoline engine’s CDI on or off by remote control.
3. Independent CDI power supply socket. Receiver power completely separates with the CDI power, so you should not worry about that CDI arouses high frequency signal will interfere the receiver, and the LED display the state of the power supply at real time.
4. LED display the state of the electric voltage at real time, and LED can display in two colors.
5. Five LED point out the distribution board's working status in real time.
6. The steering engine uses a step-down supply by switching style. The working current is 0-20A, but it can up to 30A and working for 3 seconds.
7. The distribution board supplies the steering engine's working voltage is between 4.8V to 9.7V (factory voltage is 5.2V).
8. Integrated electronic switch and a traditional mechanical switch which can make higher security and working stability.
9. The receiver uses a linear 5V to supply power.
Check price and availability
Found 11 years ago