Hobby-Lobby
POWER SUPPLY, 15VDC 250W
,
Dynamite's Passport 15V DC Power Station Dynamite's 15V DC power ...Hobby-Lobby
I-METER 7 IN 1 MULTIMETER
| Technical Specifications | i-Meter 7 in 1 Multimeter Specs |
| Voltage measurement range | 60V |
| Voltage display resolution | 0.001V |
| Volt Port | 2.54mm pitch pins, 9 pins |
| Max current | 100A |
| Shunt resistance | 0.0001ohm |
| Displayed resolution A | 0.01 |
| Temperature resolution | 1 Celsius / 1 Fahrenheit |
| PPM signal output | 750uS - 2150uS |
| Propeller testing range | 1-5 blades |
| Propeller RPM range | 1-60,000 |
| Unit Dimensions | 3-3/4 in. x 2-7/8 in. x 3/4 in. |
| Net Weight | 85g |
,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
XH BALANCING ADAPTER: X4 CHARGER
| XH Balancing Adapter | X4 Charger |
| XH Balancing Adapter | X4 Charger |
Hobby-Lobby
CHARGER LEAD WITH DEANS ULTRA CONNECTOR
,
Charger Lead with Deans Ultra Connector Polarized Deans Ultra plug ...Hobby-Lobby
13" SPEED 400 CONNECTOR LEAD, YELLOW
,
13" SPEED 400 Connector Lead, Yellow 13" yellow motor wires ...Hobby-Lobby
POLARIZED SPEED 400 CONNECTOR, 1, YELLOW
,
Polarized SPEED 400 Connector, 1, Yellow One Polarized Connector set ...Hobby-Lobby
QUATTRO B6 - FOUR 50W BALANCE CHARGERS IN ONE
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimension,
Jason Says: "This is the charger I use the most. ...Hobby-Lobby
VISION LED AC/DC CHARGER
| Technical Specifications | Vision LED AC/DC Charger Specs |
| # Cells | 4- to 8-cells (Ni-Cd/Ni-MH) |
| Peak | Yes |
| Charge Rate | Selectable at 1.5A, 3.0A, or 5.0A |
| Trickle Charge Rate | 1/16 of fast charge rate |
| LED | Yes |
| Overload Protection | Reverse Polarity and Short Circuit Protection |
,
Vision LED AC/DC Charger Providing the ultimate in NiMH technology, ...Hobby-Lobby
QUATTRO B6 - FOUR 50W BALANCE CHARGERS IN ONE
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimension,
Jason Says: "This is the charger I use the most. ...Hobby-Lobby
1-6 CELL LIPO CHARGER
,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
QUATTRO B6 - FOUR 50W BALANCE CHARGERS IN ONE
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimension,
Jason Says: "This is the charger I use the most. ...Hobby-Lobby
ADVANTAGE IQ240 LIPO COMPACT CHARGER, 110V
,
Advantage IQ240 LiPo Compact Charger, 110V The Advantage IQ240 LiPo ...Hobby-Lobby
QUATTRO B6 - FOUR 50W BALANCE CHARGERS IN ONE
Jason Says: "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." Tired of charging one battery at a time? Now charge four! 9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: Operating Voltage Range: DC 11 to 15 Volt Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts) Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A Discharge Power: 5 Watts, current is regulated Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V) Current Drain Balancing (LiPo): 300mA/cell Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process Dimension,
Jason Says: "This is the charger I use the most. ...