Hobby-Lobby
800MAH 4S 14.8V 20C LIPO BATTERY W/ JST
,
Great balance of price, weight and power Economically priced HIGH ...Hobby-Lobby
800MAH 3S 11.1V 20C LIPO BATTERY W/ JST
,
Great balance of price, weight and power Economically priced HIGH ...Hobby-Lobby
1300MAH 2S 7.4V 45C LIPO BATTERY
| Technical Specifications | 1300mAh 2S 7.4V G6 Pro Performance 45C LiPo Specs |
| Capacity | 1300mAh |
| Voltage | 7.4V |
| Connector Type | Open Ended |
| Weight | 2.60 oz (73.7g) |
| Length | 3.90 in (99mm) |
| Width | 1.22 in (31mm) |
| Height | 0.51 in (13mm) |
| Maximum Continuous Discharge | 45C |
| Maximum Burst Discharge | 90C |
| Maximum Continuous Current | 58A |
Configuration: 2S, ,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
125MAH 1S 3.7V 25C LIPO BATTERY FOR MICRO MODELS
| Technical Specifications | 125mAh 1S 3.7V G6 Pro Lite 25C LiPo, Ultra Micro Specs |
| Capacity | 125mAh |
| Voltage | 3.7V |
| Connector Type | Ultra-Micro |
| Weight | 0.12 oz (3.4g) |
| Length | 1.34 in (34mm) |
| Width | 0.43 in (11mm) |
| Height | 0.22 in (5.5mm) |
| Maximum Continuous Discharge | 25C |
| Maximum Burst Discharge | 50C |
| Maximum Continuous Current | 3.1A |
Configuration: 1S, ,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
EC3 DEVICE CHARGE LEAD WITH 12"" WI
,
EC3 Device Charge Lead with 12"" Wi Key Features Capable ...Hobby-Lobby
EC2 DEVICE & BATTERY CONNECTOR
,
EC2 Device & Battery Connector E-flite's high-quality EC2 connectors should ...Hobby-Lobby
EC2 BATTERY CONNECTOR (2)
,
EC2 Battery Connector (2) E-flite's high-quality EC2 connectors should be ...Hobby-Lobby
1.5MM (SMALL) RED & BLACK WIRE, 2 METERS EACH
,
1.5mm (Small) Red & Black Wire, 2 Meters each The ...Hobby-Lobby
B6-PRO 80 WATT BALANCE CHARGER FOR 1-6 LIPO CELLS
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. B6-Pro Instruction Manual PDF B6-Pro Includes: Internal independent lithium battery balancer: Employs an individual-cell-voltage balancer to maintain your pack in balance while charging. Balance individual cells during discharge: During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal. Fast and Storage mode charging: "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack. Charges various types of LiPoly cells: Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types. Data store/load: Up to 5 batteries' data can be stored for easy programming. Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge is possible. B6-Pro Specs: Operating voltage range: DC 11.0~18.0 Volt Circuit power: Max. charge power 80W Charge current range: 0.1~5.0A Discharge current range: 0.1-2.0A Current drain for balancing Li-po: 300 mAh/cell NiCd/NiMH battery cell count: 1-15 cells Li-ion/Polymer cell count: 1-6 series Pb battery voltage: 2V, 20V, ,
Balance charges 1-6 Lithium cells at up to 5A 5-5/8" ...Hobby-Lobby
EFUEL 20A SWITCHING DUAL OUTPUT DC POWER SUPPLY
,
Jason Says: "Nice and small, but 20A worth of juice ...Hobby-Lobby
2.5MM (POWERPOLE) RED & BLACK WIRE, 2 METERS EACH
,
2.5mm (Powerpole) Red & Black Wire, 2 Meters each The ...