Skip to content

BevRC

FRSKY D4R-II TINY TELEMETRY RECEIVER WITH CCPM AND RSSI PORT

Compatible with FrSky two-way telemetry modulesDFT, DJT, DHT, DHT-U
Operating Voltage Range3.5V~10V
Operating Current60mA
Operating RangeFull Range (>1.5km)
Dimension40x22.5x6mm
Weight5.8g

Compatibility:, Features:, • RSSI (PWM) and CPPM output., Specs:, Number of Channels:4,

It's your best choice for small plane or coptors, such ...

BevRC

FRSKY D8R-II PLUS TELEMETRY RECEIVER

FrSky provides an additional ..." />

Compatible with FrSky two way telemetry modulesDFT, DJT, DHT, DHT-U
Operating voltage3.5~10.0V
Power consumption100mA
Resolution3072
Analog voltage0~3.3V
Range1.5km-2.5km
Dimensions55 x 25 x 14 mm
Weight12.4g

Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Compatibility:, Receiver Specification:, Number of channels: 8,

The Two-way Radio System developed by FrSky provides an additional ...

BevRC

FRSKY DJT COMBO PACK FOR JR WITH V8FR-II

FrSKY ACCST technology is proven, approved by many model associations, ..." />

Operating voltage3.0~16V
Power consumption30mA
Resolution3072
Latency22ms
Range1.5km-2.5km
Dimensions44 x 24 x 14 mm
Weight9.3g
Power consumption50mA
Resolution3072 (11bit)
Dimensions63.9x48.5x36.5mm

Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., FrSky DJT is compatible with JR transmitters following:, JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, PX, 9XII, 11XZERO, Receiver Specification:, Number of channels: 8, Module specification:, Operating voltage:, 6.0V-13.0V (can handle 3S!), Output Power:: 60mW,

FrSKY ACCST technology is proven, approved by many model associations, ...

BevRC

FRSKY AMPERE SENSOR-100A

FrSky Ampere Sensor (FAS-100) ..." />

Dimension38*30*10mm
Weight24g
Measurement range0~100A
Maximum safe current100A
Sensor current consumption33mA
Update Rate≥1Hz
ModelFAS-100
Dimension38*30*10mm
Weight24g
Measurement range0~100A
Maximum safe current100A
Sensor current consumption33mA
Update Rate≥1Hz
NoteWhen FAS-100 is used with a sensor hub, please make sure the sensor hub is V2.0.
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=22

3.1 When using the FAS-100, without a FLVS-01:, 3.1.1Connect “Data Out” port of the FAS-100 directly to the “Volt” port on sensor hub using the provided cable., 3.2 When using the FAS-100, with a FLVS-01:, 3.2.1Connect the FAS-100 with, at most, two FLVS-01s and connect the “Data Out” port of FAS-100 or FLVS-01 to the “Volt” port on sensor hub using the provided cable., Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:,

FAS-100 Category:Accessories Description 1. Introduction The FrSky Ampere Sensor (FAS-100) ...

BevRC

FRSKY LIPO VOLTAGE SENSOR

FrSky Lipo ..." />

Dimension45*21*7mm
Weight5.2g
Measurement range1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range0.20~4.20V
ModelFLVS-01
Dimension45*21*7mm
Weight5.2g
Measurement range1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range0.20~4.20V
Voltage display resolution0.01V
Voltage detection precision0.05V
Current of the board15.5mA
Operating temperature range-30℃~70℃
Pixel128*64 with OLED display screen
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=22
http//www.frsky-rc.com/download.asp?id=23
http//www.frsky-rc.com/download.asp?id=23

1. Specifications:, , ﹡Note:, When FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, please refer to below points:, , Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:, Driver for XP/ Win7 Vista:, DHT-U Upgrade ROM_V2.0:, How-to_DHT-U upgrade:,

Product Show FLVS-01 Category:Accessories 2. Set Up 2.1 FrSky Lipo ...

BevRC

FRSKY LCD DISPLAY

ModelFLD-02
CompatibilityFrSky DFT, DJT and DHT
Dimension55*40*12mm
Pixel128*64
ModelFLD-02
CompatibilityFrSky DFT, DJT and DHT
Dimension55*40*12mm
Pixel128*64
BladeBlade Number
Volt ratioA1 & A2 Voltage Division Ratio
Unit SetSpeed (m/s or MPH)
Alarm SetA1_1/2, A2_1/2, RSSI_1/2

1.1 Specifications:, 1.2 Features:, 1) Show all connected sensors data;, 2. Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF, 3 Screen structures:, 3.1 Main Screen, Note: Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., :, , Note: Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2.,

Product Show FLD-02 Category:Accessories 1.Introduction 2) Capable of programming alarm ...

BevRC

FRSKY SENSOR HUB

FrSky Sensor Hub ..." />

Dimension37*30*8mm
Operating Voltage Range4~10V
Operating Temperature Range-20~80℃
FeatureFirmware upgradable
FuelFuel Gauge Sensor
GPSGPS
VarioVariometer Sensor
VoltLipo Voltage Sensor
Temp1/2Temperature Sensor
PowerPower Supply
RPMRPM Sensor
AccTriaxial Acceleration Sensor
Datause provided cable to connect to digital side port (G, TX, RX) of FrSky telemetry receiver

: 37*30*8mm, :, Operating Voltage Range, : 4~10V, : -20~80℃, : Firmware upgradable, :, , Installation:, It is recommended to take the length of all sensors’ wires into consideration before mounting, and use double-sided tape to install FrSky sensor hub at an appropriate place in the model.,

Product Show Sensor Hub and Sensors Category:Accessories FrSky Sensor Hub ...

RangeVideo

FRSKY 2.4GHZ JR COMBO PACK

FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives ..." />

Power consumption50mA
Resolution3072 (11bit)
Dimensions63.9x48.5x36.5mm
Receiver specificationModel
Operating Voltage Range3.0V-16.0V
Operating Current30mA
Resolution3072
Latency22ms
Specified7CH, 9g, 49mm×23mm×12mm
WarningDO NOT connect servos to channel 8, otherwise servos will get hot or even burn out.

Description:, FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!, Purchase includes:, (1) 8-channel transmitter module V8JT, Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Transmitter Module is compatible with the following transmitters:, FrSky V8JT is compatible with JR transmitters following:, JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX 22, MX-24S, PX, 9XII, Transmitter module specification:, Operating voltage:, 6.0V-13.0V (can handle 3S!), Output Power:: 60mW, Bind Procedure:, , Failsafe:, , V8R7-SP supports failsafe function for all channels. Just do it as bellow:, After the receiver has been bind, press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, the failsafe is set up successfully.,

Details New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives ...

ReadyMadeRC

FRSKY X6R 6/16 CHANNEL RECEIVER

FrSky Taranis X9D/XJT in D8 mode FrSky Taranis ..." />

Dimension47.42x23.84x14.7mm (L x W x H)
Weight15.4g
AntennaPCB Antenna (Mounted) + 150mm Coaxial Antenna with packing
Number of Channels16CH (1~6ch from conventional channel outputs, 1~16ch from SBUS port)
With RSSI output on boardPWM voltage output (0~3.3V)
Operating Voltage Range4.0~10V
Operating Current100mA@5V
Operating Rangefull range (>1.5km)
CompatibilityFrSky DFT/DJT/DHT/DHT-U in D_mode
Firmware Upgradeable FrSky Taranis X9D/XJT in D8 mode FrSky Taranis ...

BevRC

FRSKY DJT COMBO PACK FOR JR WITH D8R-II PLUS TELEMETRY

Operating voltage4.0~7.2V / 3.0~16V(HV Version)
Power consumption30mA
Resolution3072
Latency22ms
Analog voltage0~3.3V
Range1.5km-2.5km
Dimensions49 x 24.5 x 15 mm
Weight14g
Version2.0
Operating voltage6.0V-13.0V (can handle 3S!)
Power consumption50mA
Resolution3072 (11bit)
Dimensions63.9x48.5x36.5mm
Version2.0

Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., FrSky V8JT is compatible with JR transmitters following:, JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX 22, MX-24S, PX, 9XII, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,

Easy to bind and very fast link-up. Excellent reboot time. ...

BevRC

FRSKY TFRSP- FUTABA FASST COMPATIBLE WITH SPPM AND RSSI PORT

FASST 2.4G Air Systems (7CH Mode/Multi Mode)6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.
Number of Channelsup to 10 channels (CPPM for CH1~CH9, servo signal for CH5~CH10)
Operating Voltage Range3.5V~10V
Operating Temperature Range-10℃~60℃
Dimension53mm*30mm*11mm
Weight13.5g
NoteIncreased duty means good signal reception, and vice verse.

1.1 Compatibility:, 1.2 Specifications:, Warning: Servos are not to be plugged into Channel CPPM and Channel RSSI, otherwise servos will get hot or may burn out., 2.1 Bind procedure:, Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally., 2.2 Setting failsafe:, TFRSP supports failsafe function for all channels. Follow the steps below to set failsafe:, 1) Bind the receiver first, and disable failsafe on the transmitter side;, Warning: Some transmitter manufacturers use a failsafe method that can interfere with that used by FrSky. Be sure to disable any transmitter failsafe settings before setting FrSky failsafe positions. Unusual jitter may result otherwise., 2.3 LED status:, , Please find the how-to guide with the file named “Set up FrSky as a wireless trainer system” via the following link:, www.frsky-rc.com/download.asp?id=23,

Can be used with YS-X4 through one cable, using the ...

BevRC

FRSKY BATTERY VOLTAGE SENSOR LITE

FrSky D series accessoriesserial cable
http//www.frsky-rc.com/download.asp

Introduction:, FrSky Battery Voltage Sensor is provided as Two Way Telemetry System’s Optional Accessory. There are three voltage ranges to choose: 1S lipo for battery voltage range from 0V~6.6V, up to 3S lipo for 0V~13.2V and up to 5S lipo for 0V~19.8V. Please check the battery voltage division ratio for each option below:, Recommended Voltage Option               Max Lipo Pack Count            Battery Voltage Division Ratio, 1S                                                            1S                                                2:1, 2S                                                            3S                                                4:1, 3S                                                             5S                                                6:1,

Product Show FBVS-01 Category:Accessories Description More detail:

BevRC

FRSKY 7DB PATCH ANTENNA FOR TX MODULE

Frsky Tx module to enlarge the control range." />

,

For Frsky Tx module to enlarge the control range.

BevRC

FRSKY 5DB UPDATE ANTENNA

frsky Tx module to enlarge the control range." />

,

For frsky Tx module to enlarge the control range.

BevRC

FRSKY D8R-XP TELEMETRY RECEIVER WITH CPPM PORT

FrSKY ACCST technology is proven, approved by many model associations, ..." />

Operating voltage3.0~16V(HV Version)
Power consumption30mA
Resolution3072
Latency22ms
Range1.5km-2.5km
Dimensions56 x 25 x 20 mm
Weight12.2g

Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 8,

FrSKY ACCST technology is proven, approved by many model associations, ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby