HobbyKing
TURNIGY HELI-TACH 3600 OPTICAL TACHOMETER 1000~3600RPM
Turnigy Heli-Tach 3600 Optical Tachometer 1000~3600RPM Finally, there is an ..." />
RPM Range | 1000 – 3600 (+/-40) |
New Feature:, The Turnigy Heli-Tach 3600 now features an ON/OFF power switch on the side of the unit to easily switch the device on and off., *Note:, Never attempt to use Heli-Tach while flying your model. Always have someone else take the RPM reading for you as you fly, or have someone else fly your heli while you use the Heli-Tach., Input Voltage:, DC6V – 9.6V (9v Square battery pack - 6LR61),
Turnigy Heli-Tach 3600 Optical Tachometer 1000~3600RPM Finally, there is an ...5 Reviews
HobbyKing
TURNIGY FBL100 3D MICRO HELICOPTER (RTF) (MODE 2)
Turnigy FBL100 is a feature packed micro 3D helicopter ..." />
Length | 238mm |
Height | 93.7mm |
Weight | 50g |
Main rotor diameter | 249mm |
Tail rotor diameter | 45mm |
Battery | 3.7V 300mAh 30C |
Transmitter | Mode 2 |
Features:, High precision 3-axis flybarless system, Specs:, Included:, 1 x Turnigy FBL100 Micro 3D Helicopter, Required:, 4 x AA batteries (for radio transmitter),
The Turnigy FBL100 is a feature packed micro 3D helicopter ...5 Reviews
HobbyKing
TURNIGY FBL100 3D MICRO HELICOPTER (RTF) (MODE 1)
Turnigy FBL100 is a feature packed micro 3D helicopter ..." />
Length | 238mm |
Height | 93.7mm |
Weight | 50g |
Main rotor diameter | 249mm |
Tail rotor diameter | 45mm |
Battery | 3.7V 300mAh 30C |
Transmitter | Mode 1 |
Features:, High precision 3-axis flybarless system, Specs:, Included:, 1 x Turnigy FBL100 Micro 3D Helicopter, Required:, 4 x AA batteries (for radio transmitter),
The Turnigy FBL100 is a feature packed micro 3D helicopter ...3 Reviews
HobbyKing
TURNIGY 3D-H 3-AXIS FLYBARLESS HELICOPTER CONTROL SYSTEM
Turnigy 3D-H FBL System is breaking all ..." />
Size | 36.5x26x14mm |
Operating Voltage | 3.5~8.5V |
Features:, • High performance 3-axis FBL system, Specs:, Weight:, 23.8g (without wires), Sensor Technology:, MEMS angular rate sensors, Cyclic Servo Type:, Digital or Analog 50Hz/65Hz/120Hz/200Hz, Tail Servo Type:, Digital or Analog 960us/760us/1520us, Adjustable Cyclic Servo Frequency:, 50Hz/65Hz/120Hz/200Hz, Adjustable Tail Servo Frequency:, 50Hz/165Hz/270Hz/333Hz, Included in box:, Turnigy 3D-H 3-Axis Flybarless System,
The all new Turnigy 3D-H FBL System is breaking all ...5 Reviews
HobbyKing
TURNIGY FBL100 3D MICRO HELICOPTER W/2.4GHZ RF MODULE (SPEKTRUM/JR/FUTABA COMPATIBLE)
Turnigy FBL100 is a feature packed micro 3D helicopter ..." />
Length | 238mm |
Height | 93.7mm |
Weight | 50g |
Main rotor diameter | 249mm |
Tail rotor diameter | 45mm |
Battery | 3.7V 300mAh 30C |
Features:, • High precision 3-axis flybarless system, *Note:, Your Transmitter must have a trainer port (JR style 3.5mm or Futaba style 6-pin) and be capable of outputting PPM signal., Specs:, Included:, 1 x Turnigy FBL100 Micro 3D Helicopter, Required:, Your own 6CH transmitter with trainer port (JR style 3.5mm or Futaba style 6-pin),
The Turnigy FBL100 is a feature packed micro 3D helicopter ...5 Reviews
HobbyKing
TURNIGY 3D-H V2 3-AXIS FLYBARLESS HELICOPTER CONTROL SYSTEM W/S.BUS AND DSM2/DSMX SATELLITE SUPPORT
Turnigy 3D-H V2 FBL System is breaking ..." />
Size:, Weight:, Operating Voltage:, Sensor Technology:, Cyclic Servo Type:, Tail Servo Type:, Adjustable Cyclic Servo Frequency:, Adjustable Tail Servo Frequency:, Turnigy 3D-H V2 3-Axis Flybarless System,
The all new Turnigy 3D-H V2 FBL System is breaking ...HobbyKing
TURNIGY HEX DRIVER SET 4 IN 1 1.5~ 3.0
Turnigy 4 in 1 Hex driver set comes with ..." />
,
The Turnigy 4 in 1 Hex driver set comes with ...5 Reviews
HobbyKing
TURNIGY 4MM BALL END REAMER
Turnigy 4mm Ball End Reamer Ultra strong steel tip, wont ..." />
,
Turnigy 4mm Ball End Reamer Ultra strong steel tip, wont ...5 Reviews
HobbyKing
TURNIGY BALL END DRIVER FOR 1/8~1/10 MODEL CARS
Turnigy Ball End Driver for 1/8~1/10 Model Cars Lightweight, hollow ..." />
,
Turnigy Ball End Driver for 1/8~1/10 Model Cars Lightweight, hollow ...5 Reviews
HobbyKing
TURNIGY 4.7MM BALL END REAMER
Turnigy 4.7mm Ball End Reamer" />
,
Turnigy 4.7mm Ball End Reamer5 Reviews
HobbyKing
TURNIGY MINI MEMS AVCS GYRO & PROGRAM BOX
Turnigy® Mini MEMS AVCS Gyro will give very precise ..." />
Specification | Sensor Type |
Operating voltage | 4-10 Volts, current < 60mA |
Temperature range | -10°C to +50°C |
Size | 20.5×19.5×10mm |
Weight | 10g |
Servo compatibility | 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo. |
5 Reviews
HobbyKing
TURNIGY LONG SHAFT 4PC HEX DRIVER SET
Turnigy screw driver ..." />
,
High strength and light weight. The 4pc Turnigy screw driver ...5 Reviews
HobbyKing
TURNIGY BATTERY STRAP 330MM
Length | 330mm |
Wide | 15mm |
Material:, 100% Polyester / 0% Cotton,
We searched for a long time to find a battery ...5 Reviews
HobbyKing
TURNIGY HEX DRIVER SET 1.5~ 3.0
Turnigy Hex driver set comes with two light weight ..." />
,
The Turnigy Hex driver set comes with two light weight ...5 Reviews
HobbyKing
TURNIGY HEAD LOCK & STANDARD GYRO (DIGITAL/ANALOG)
Turnigy Piezo Head Lock & Standard Gyro. The TR302-AD is ..." />
Voltage used | 4.2 - 7V |
Power consumption | Approx 33mA |
Operation temp | -5C - 60C |
:, Small Size piezoelectric ceramic gyro, Dual Mode :, Head Lock and Standard,
Turnigy Piezo Head Lock & Standard Gyro. The TR302-AD is ...5 Reviews