Skip to content
Discountinued

Hobby-Lobby

Senior Telemaster Laser Cut Kit


Tech SpecsWingspan
Length63-1/4"
Wing area1301 sq. in.
Flying weight (w/5s 5000mAh)10-1/2 pounds
Motor60 size brushless outrunner
Battery5 cells 5000mAh LiPo
Speed Control85A Opto
Servos (Ailerons and Flaps)4-Standard HS-322 or equiv.
Servos (Elevator and Rudder)2-HS-225MG
Servo (Drop Hatch)1-eRC 9g
Senior Telemaster DiscussionClick

Jason Says:, "Simply the best design I've seen! No more hassle to get the wings on and off, amazing. ", The Senior Telemaster Kit includes a drop box: a large hatch on the bottom of the fuselage can be remotely opened by a servo for candy drops or parachute drops. The fuselage interior is large with lots of room for a camera. When the drop door is opened it swings to the rear and is held open by magnets., Kit includes strong aluminum landing gear and bent wire tailwheel assembly, pushrods and clevises. Axels, main wheels and tail wheel not included. You will need 4 rolls of covering. A 6-channel radio system is required to use all functions: Ailerons (2 servos), Flaps (2 servos), Elevator, Rudder (2 HS-225 servos), Drop hatch (eRC 9g servo)., What's New in the Senior Telemaster V2 Kit:, All laser cut precision balsa and plywood, Building Videos:,

Senior Telemaster Kit V2 - Laser cut perfection
Completely re-engineered for a great build experience. We retained all the terrific flight characteristics of the original Senior Telemaster while adding all the features that our customers have been asking for. Battery or fuel tank access is through a large hatch on the top front of the fuselage. The wings are 2-piece and slide onto a large 1/4" x 1" aluminum spar joiner. The wing connection to the fuselage is with our unique rotate-and-snap system; it takes only seconds to install the wings and there are no loose parts to lose or forget. The vertical and horizontal tail assembly is removable as a unit and because the servos for elevator and rudder are in the stabilizer, there are no pushrods to disconnect; just unplug the servo extensions and four mounting screws.
The precision of laser cutting brings a whole new experience to kit building, parts fit precisely and assembly is much faster than with earlier style kits. Full size black line prints and a 30-page photo-illustrated instruction manual guide you through the build with each step clearly covered. You can be assured of a warp-free, light yet strong aircraft that retains all of the great flying characteristics that makes the Senior Telemaster the iconic model aircraft that it is. The Senior Telemaster is a great match for the TEL1425 Float Kit. The rear attachment point for float operation is supplied in the kit.
2-piece wing for easy transport
Large strong aluminum spar joiner (no struts required)
Removable tail group (undue 4 bolts and 2 electrical connections)
Included drop box for added fun
Includes mounting point for float operation
HERE
to join the building discussion as well as see tips and tricks.


Check price and availability


Found 11 years ago



Related Products


Senior Telemaster Plus (OVERSIZE)

View
Senior Telemaster Plus (OVERSIZE)

Ready Built Senior Telemaster, Red/White (OVERSIZE)

View
Ready Built Senior Telemaster, Red/White (OVERSIZE)

Ready Built Senior Telemaster, Red/White (OVERSIZE)

View
Ready Built Senior Telemaster, Red/White (OVERSIZE)

Senior Telemaster Plus (OVERSIZE)

View
Senior Telemaster Plus (OVERSIZE)

Senior Telemaster Plus (OVERSIZE)

View
Senior Telemaster Plus (OVERSIZE)
BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby