Skip to content
Discountinued

Hobby-Lobby

400 Class J-3 Cub EPO Foam RTF


Incredible scale detail in a great flying EPO super scale J3 Cub 40-1/4 in. wingspan, 27-1/8 in. long, 232-1/2 sq. in. wing area, 23 oz. flying weight. There is not a more iconic civil airplane than the Piper J-3 Cub, thousands of pilots have earned their wings at its controls and logged untold hours of flight in this legend. There are a lot of model airplanes that call themselves Cubs but few have the degree of detail that makes this model a standout. Sitting on the flightline it just looks right, the detailed 4-cylinder engine poking out of the cowl, the fat tires and bungee suspension (yes it works), wing struts and jury struts and even the sprung tail wheel all add to the illusion. In the air the realism continues, the classic paint scheme and true to scale proportions just say Cub. The model is nearly ready to fly when you take it from the box, just a little assembly and battery charging and you are ready to go. Airplane is complete with 2.4GHz 4-channel Transmitter and Receiver for glitch free flying. The motor is a brushless outrunner connected to a 20A ESC and all powered by the included 3-cell 1300mAh LiPo battery. A plug-in wall LiPo balance charger is included and 4 servos are pre-installed. The flight time is about 10 minutes on a charge. The EPO foam used in the wings and fuselage really adds to the durability of the airplane and resists that hanger rash and dings that an everyday flyer sustains. Controls are ailerons, elevator, rudder, and throttle. A 400 Class J3 ARF version is also available. 400 Class J3 Cub RTF Highlights: Highly detailed scale appearance with full cockpit detailing. Includes instrument panel, pilot and joystick. Cockpit is a single injection molded part that retains the elegance of the original aircraft. The main landing gear replicates the original and provides scale dampening action. The steerable tail wheel is scale in appearance and is spring dampened. The engine detail is unmatched in authenticity Fuselage and Wings are EPO foam construction for great durabil,

Incredible scale detail in a great flying EPO super scale J3 Cub 40-1/4 in. wingspan, 27-1/8 in. long, 232-1/2 sq. in. wing area, 23 oz. flying weight. There is not a more iconic civil airplane than the Piper J-3 Cub, thousands of pilots have earned their wings at its controls and logged untold hours of flight in this legend. There are a lot of model airplanes that call themselves Cubs but few have the degree of detail that makes this model a standout. Sitting on the flightline it just looks right, the detailed 4-cylinder engine poking out of the cowl, the fat tires and bungee suspension (yes it works), wing struts and jury struts and even the sprung tail wheel all add to the illusion. In the air the realism continues, the classic paint scheme and true to scale proportions just say Cub. The model is nearly ready to fly when you take it from the box, just a little assembly and battery charging and you are ready to go. Airplane is complete with 2.4GHz 4-channel Transmitter and Receiver for glitch free flying. The motor is a brushless outrunner connected to a 20A ESC and all powered by the included 3-cell 1300mAh LiPo battery. A plug-in wall LiPo balance charger is included and 4 servos are pre-installed. The flight time is about 10 minutes on a charge. The EPO foam used in the wings and fuselage really adds to the durability of the airplane and resists that hanger rash and dings that an everyday flyer sustains. Controls are ailerons, elevator, rudder, and throttle. A 400 Class J3 ARF version is also available. 400 Class J3 Cub RTF Highlights: Highly detailed scale appearance with full cockpit detailing. Includes instrument panel, pilot and joystick. Cockpit is a single injection molded part that retains the elegance of the original aircraft. The main landing gear replicates the original and provides scale dampening action. The steerable tail wheel is scale in appearance and is spring dampened. The engine detail is unmatched in authenticity Fuselage and Wings are EPO foam construction for great durability and resistance to hanger rash. Painted in the classic Cub scheme for totally realistic flight appearance. 400 Class J3 Cub RTF Specs: Wingspan: 40-1/4 in. (1020mm) Length: 27-1/8 in. (690mm) Flying weight 22.9 oz. (650g) Wing area 232-1/2 sq. in. (15dm2) Wing loading 14.2 oz/sq.ft. (53g/dm2) Thrust 18.3 oz. (520g) Flying time: 10 minutes RC System Includes: 2.4GHz Transmitter and Receiver Outrunner Brushless motor (DST-1200) 20A Brushless ESC LiPo Battery 11.1V 1300mAh Plug-in wall LiPo balance charger 4 Servos (2-5g, 2-9g) Proper C.G.: 42 to 48mm from the leading edge of the wing


Check price and availability


Found 11 years ago



Related Products


Art-Tech Tail Wing for 400 class P-51D (EPO) ...

View
Art-Tech Tail Wing for 400 class P-51D (EPO) ART5B211

Art-Tech Cowl for 400 class J3 (EPO) ART51045

View
Art-Tech Cowl for 400 class J3 (EPO) ART51045

Sonic 400 Pylon Racer Composite 720mm (ARF)

View
Sonic 400 Pylon Racer Composite 720mm (ARF)

ESP Mini Pylon Racer Composite 835mm (ARF)

View
ESP Mini Pylon Racer Composite 835mm (ARF)

Super Scout 500 Class Airplane w/On-Board Video Camera ...

View
Super Scout 500 Class Airplane w/On-Board Video Camera 1400mm (PNF)
BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby