Narrow your results
Price
Refine your search
Sellers
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» FPV

Displaying 360-375 of more than 1000 results
Sort By:
Specification:

NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required, Manual:, GPS Expander Manual,

Description: New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes. Plugs into the eLogger V3 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated ... more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:
CH1910
CH2980
CH31010
CH41040

Highly integrated 900 MHz, 500mW transmitter. Range similar to the 1W 2.4Ghz transmitters.Compact size, very low power consumption. The frequencies associated with the 4 channels are:, Features:, Frequency Band:, 900MHz, Number of Channels:, 4, Modulation:, FM, Transmission Range:, 500 Meter plus, Power Consumption:, 500mA, Output Power:, 500mW, Operation Voltage:, 12, Power Supply:, 12V/500mA (not included), Antenna Connector:, SMA Connector, Weight:, 7.9 g, Dimensions:, 50.0 x 25.7 x 8.0 mm, Documentation:, , Warranty:, 6 months, Note:, The use and operation of this product will require a HAM or Amateur radio license., Important note for Canada customers:, , Please note: channels 2,3,4 of this transmitter are outside of the amateur frequency spectrum for Canada. These channels cannot be legally used even if you have a Radio Amateur or HAM license. Please make sure that you obey Industry Canada regulations around use of these devices. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges.,

Description: If this transmitter is shipped to a USA address, it will be locked down on 910Mhz, user cannot change the frequency. (FCC restriction). MHz (in USA and Canada use only this channel), MHz, MHz, MHz. Recommended Receiver 900MHz Standard Recevier Datasheet For all other countries please check the regulation around ... more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:

Note: Please make sure you compare the connections of this cable with your original cable. Please put them side by side and verify that all pins are matching! If not, with a small pin it is very easy to remove and reinsert the terminals in the correct order! Please make sure you verify it, otherwise you can cause damage to your camera!!!!,

Description: This is a replacement 4 pin camera cable for easy installation. Will fit most of the NGH OSD cameras, KX-555 and many others which have 4 pin connectors. This cable can be used in conjunction with Many OSD systems - Eagletree OSD, Blackstork OSD, etc. providing direct plug in to ... more details »
Get More Info
Found 3 years, 9 months ago at ngHobbies
Description: The HItec compact sensor station collects data from each sensor of your gas and glow powered aircraft sending it back to your transmitter via the Optima 7 or Optima 9 omni-directional receivers.. more details »
Get More Info
Found 4 years, 4 months ago at ngHobbies
Description: The Hitec HTS-GPS sensor displays constant directional information such as speed, altitude, latitude and longitude. more details »
Get More Info
Found 4 years, 3 months ago at ngHobbies
Specification:
There are different charging modes for all requirementsCharging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc.

Features:, Input Voltage range:, 11V-18V, Charging current range:, 0.1A - 7A, Charge power limit:, Max. 150W, Discharge power limit:, 25W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-26cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-8 cell, Pb battery voltage:, 2-36V, Weight:, 510g, Dimensions:, 145x98x30mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor,

Description: The EV-815A is a low cost high preformance Li-Po, Li-Ion, Li-Fe, NiCd, MiMH and Pb battery charger. Simple and efficient user interface makes the operation easy. Displays real time battery voltage, charging current and temperature of the charged battery. Individual cell balancing while charging and discharging keeps your batteries at ... more details »
Get More Info
Found 4 years, 4 months ago at ngHobbies
Specification:
Basic Telemetry FunctionRX Low Battery Warning
Description: What better way to upgrade your 72 MHz Hitec or Futaba radio syatem than with our 2.4GHz Module Super Combo packs. These packs include our Spectra 2.4GHz module along with 2 of our Optima series receivers. So whether you're looking to upgrade your Hitec Eclipse, Futaba 8U or any of ... more details »
Get More Info
Found 4 years, 3 months ago at ngHobbies
Description: The Spectra Pro gives owners of the Aurora 9 the ability to operate any 72MHz FM / PPM receiver on either a negative or positive shift.FeaturesPlug & Play with the Aurora 9 TransmitterSynthetized RF module for Aircrafts more details »
Get More Info
Found 5 years, 12 months ago at ngHobbies
Specification:
Dimensions(L) 138mm
Weight650 g.

Technical Data:, Package contains:,

Description: This is a 4 cell 35C (4S2P) flat design LiPo battery for use with most of the Mikrokotper Hexa and Okto models. One battery with installed Dean connector and JST balancing lead. more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:
Input6-23V - reverse polarity protected
Output5V +/-5% - improved output voltage stability on higher loads
Load1000mA max
Efficiency85-90% depending on load
Width24mm, Height
Weightless than 5 grams

Features:, Specifications:, : Minimal assembly and soldering required., Documentation:, Please click the following link for the manual:, Utilization and assembly manual, :, Click here to read, This product is:, Made in Canada,

Description: This new version 2 of the very successful 5V 1A step down regulator is a state of art design. It has several improvements over the first version and it still fits on the back of the LawMate 500mW transmitter, allowing you to power the transmitter and a 5V camera from ... more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Description: The EV-680A is a low cost high preformance Li-Po, Li-Ion, Li-Fe, NiCd, MiMH and Pb battery charger. Simple and efficient user interface makes the operation easy. Displays real time battery voltage, charging current and temperature of the charged battery.Individual cell balancing while charging and discharging keeps your batteries at peak ... more details »
Get More Info
Found 5 years, 12 months ago at ngHobbies
Specification:

feed from a GoPro Hero HD camera to an FPV video transmitter. The 2.5mm right angle jack fits the GoPro Hero cameras AV plug and the servo type connector has the following connections:, Yellow (Orange) - Video out,

Description: This cable offers FPV video only Red - Not connected Black (Brown) - Ground connection more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:
Width75mm
Height25mm
Length85mm
Weight120 grams (without antenna)

Notice:, , Dimensions:, , Content of the pacakge:, 1 x EzUHF Transmitter, Note:, , Documentation:, , Support thread on RcGroups:,

Description: The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by the EzUHF transmitter, so any radio can be used with your TrackR2 ... more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:
http//www.youtube.com/embed/CRhzsxaGNGs
http//www.youtube.com/embed/mDQwQQfyXAU

Package content:, 1 x DogFighter Light Pack, Demo Video:, , Product Video:, Documentation:, Click on the following links to access the available documentation:, DogFighter Combat Simulation System,

Description: The well known EMR Laboratories presents yet another excellent product system for the FPV and RC enthusiast. The DogFighter Combat Systems is a revolutionary product line which can be used in several different setups. Originally developed to compliment the ForceFly Advanced Force Feedback control system, the DogFighter Combat System gives ... more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Specification:

Detailed Specifations:, Bearing Type:, Dual Ball Bearing, Speed:, 0.26 sec @ 60 deg. and 1.56sec @360deg., Torque:, 6.6 / 7.6 kg.cm, Size:, 40.50 x 20.00 x 42.00mm, Weight:, 50.00g,

Description: This is the GWS S125 1T servo. 1T = 1 Turn (360 degree) version. more details »
Get More Info
Found 5 years, 8 months ago at ngHobbies
Query took 0.056s