Narrow your results
Price
Refine your search
Sellers
Items History
Vote for us!

Click the +1 button to give this site a thumbs up at Google!

» FPV

Displaying 315-330 of more than 1000 results
Sort By:
Specification:
Gain1.25dbic
Beam360 degree doughnut
PolarizationRHCP
Rejection9db
ConnectorSMA

Radiation pattern:,

Description: This amazing creation is built by Alex Greve (IBCrazy). The cloverleaf antenna design has proven to be one of the best antenna designs for FPV flying. This 2.4GHz antenna is right hand circular polarized, and can be used with linearly polarized antennas (with some loss) or a more perfect match ... more details »
Get More Info
Found 1 year, 7 months ago at ReadyMadeRC
Specification:
Gain1.25dbic
Beam360 degree doughnut
PolarizationRHCP
Rejection9db

Radiation pattern:,

Description: This amazing creation is built by Alex Greve (IBCrazy). The cloverleaf antenna design has proven to be one of the best antenna designs for FPV flying. This 2.4GHz antenna is right hand circular polarized, and can be used with linearly polarized antennas (with some loss) or a more perfect match ... more details »
Get More Info
Found 1 year, 9 months ago at ReadyMadeRC
Specification:
Gain.92dbic
Beam width360 degree doughnut
Multipath rejection9db
PolarizationRHCP
Description: The skew planar wheel from "IBCrazy" is a circularly polarized omni directional antenna that has revolutionized FPV. Use this antenna as both a TX antenna and an RX antenna. This antenna has good axial ratio and rejects multipath interference very well. Couple this antenna with a Cloverleaf antenna for mid ... more details »
Get More Info
Found 1 year, 10 months ago at ReadyMadeRC
Specification:

IMPORTANT:, This tiny regulator using a LDO chip and converts the voltage difference to "heat". Regulator chip including a thermal shutdown on 125 degree Celsius and it can handle 800mA current easily if you can cool it. We are suggesting to maximum, : 7-18V (2-4S LiPO), : 5 volt, : 500mA nominal 1A ma, : 0.65gr,

Description: This tiny 5volt regulator perfect for your 5volt FPV cameras or similar equipments. It's including hi-tech LDO regulator and this LDO accepting 7-18V input voltage. We designed the PCB with 1 input and 2 output(for a second usage) and an extra signal pins. You can use standard a servo wire ... more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Specification:
For FY-21APFixed Altitude flying mode; for FY-3ZT/FY-31AP
GPS speed (Unitkm/h)
Current latitude and longitude of the plane (Format“dddmm.mmm” )
The angle of turning to the return point (Unitdeg)
Total flight time (Format“mm.ss”)
Course angle of flight (Unitdeg)
(UnitmA / h)
Climb rate  (Unitm/s)

The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes  separately are as following: A. All Information Displayed; B., The modes are shown as below:, , Includes:,

Description: Brief Introduction The Hornet- OSD overlays flight telemetry information onto your video image. The telemetry information displayed includes flight altitude, flight speed, flight direction, and home direction and so on. You also can save the telemetry information to a MICRO SD card ( available separately ), then realizing trace playback ... more details »
Get More Info
Found 2 years, 8 months ago at ReadyMadeRC
Specification:
Resolution720×480 720×576 640×480 (pixel for pixel raw video frame – no crop or scale)
FormatNTSC or PAL
CodecXvid Mpeg4
Bitrate8000Kb/s (high quality mode – 4GB for 1 hour)
Audio inputInternal/External Mic
Playback speed1x 2x 4x 8x 20x (both forwards and reverse)
SD CardSDHC Card Class 10 recommended (sold separately)
Excellent choices for SD Cards16GB Class 10

Included in the package:, DVR, Available accessories:, ,

Description: Due to pricing and reliability issues, we are no longer carrying the FPV-Japan DVR. Please check out the new RMRC FPV1000 DVR , with increased reliability and a significantly lower price! If you have a DVR using the same hardware and wish to upgrade to our firmware, you can use ... more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Description: Replacement foam for the FatShark RCV922 Aviator Edition (both new and old versions) 1 set. more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Description: This is a plug in charger with EU prongs for recharging the battery included with the FatShark Aviator and optional for the Dominator goggles. more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Description: One set of replacement rubber eye cups for the FatShark Dominator and Predator video glasses. more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Description: 2.1mm barrel to Deans style adapter for FatShark batteries. Allows easy connection to some chargers, or can be used as a discharge adapter for using the FatShark battery with other components more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Specification:

(Note: these frequencies are compatible with Airwave based systems, but with the exception of 2450MHz, they are not compatible with Lawmate 2.4Ghz frequencies.),

Description: 2.4GHz video receiver module for the FatShark Dominator video glasses. Four RF Channels (2414, 2432, 2450, 2468 MHz) more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Description: This will attach to any of the FatShark (or other product) power inputs that use a 2.1mm barrel connector. Protects your equipment and cables from reverse voltage and over-current (for example, if you short something out somewhere else in your equipment). Great when powering those sensitive electronics with high discharge ... more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Specification:

Note: Most JR/Spektrum radios do NOT have the correct trainer functions to work with a head tracker.  So far, only the DX8 has been verified to work.,

Description: This cable will allow you to hook up your FatShark Dominator Goggles to a Spektrum DX8, FlySky TH9B, IMAX 9X, Turnigy 9X, or similar radios that have the proper trainer functions to work with head trackers. more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Specification:
NoteBattery, charger and adjustable earphones are sold separately.
Option 1The
Option 2If you want to share the power supply with your ground station, the
Option 3Any 2s-3s lipo with a 2.1mm barrell connector like
Interpupillary (IPD) distance59-69mm (adjustable)
Power input7-13V (2s/3s supply)
Power Consumption @7.4VDC200/350mA (direct/wireless)
Weight150g
Power Supply7-13V (2s-3s supply)
Power consumption310mA@7.4VDC
Transmitting Power250mW
Ch15740, CH2
Mechanical55x26x11mm
Weight22g with antenna

Features: Adjustable IPD, 35 degree FOV VGA display, secured rubber eyecups, lightweight, integrated 5G8 receiver and MIG V4 head tracker., Kit includes:, AtttitudeSD headset (with RX and HT) (Uses the high performance NexWaveRF receiver module), *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

Description: AttiudeSD (VGA, 640X480) FPV goggle with adjustable IPD, large 35 degree FOV, integrated 5G8 receiver and MIG head tracker. Kit includes Fat Shark's new high powered 250mW TX and filtered balance lead adapter. AttitiudeSD is the redesigned RCV922 headset with the largest FOV of any consumer video glasses for the ... more details »
Get More Info
Found 3 years, 2 months ago at ReadyMadeRC
Specification:
This package includesDragon OSD V2

NOW AVAILABLE: CUSTOM CABLE ADAPTERS TO ALLOW YOU TO PLUG THE DRAGONOSD+ DIRECTLY IN TO THE READYMADERC CABLE SYSTEMS.  POWERS YOUR DRAGONOSD THROUGH THE VIDEO SYSTEM TOO!  AVAILABLE, *Note: will be shipped with the Deans style t-connectors included, but not soldered on.  This will allow users of other connections to easily solder on their own connectors.,

Description: The Dragon OSD+ v2 is the newest analog OSD from DragonLabs. It provides a light and low cost board, but high quality display and a very long list of features. Knowledge is required to assemble and use the OSD, please see the Dragonlabs web page and the RCGroups thread on ... more details »
Get More Info
Found 9 months, 1 week ago at ReadyMadeRC
Query took 0.083s